Buku Panduan Pangguna Multimeter Digital Fluke 15B+

1. Langkungview

The Fluke 15B+ Digital Multimeter is a rugged, reliable, and accurate tool designed for various electrical applications. It offers essential measurement capabilities in a user-friendly design, suitable for both professional and serious DIY users.

Gambar: Hareupeun view of the Fluke 15B+ Digital Multimeter, showing the display, rotary dial, and input jacks.

Fitur konci:

• Peunteun Kasalametan CAT III 600V: Ensures safety for electrical systems in residential and commercial settings.
• AC / DC Voltage Measurement up to 1000V: Ngukur duanana AC jeung DC voltage for a wide range of applications.
• AC/DC Current Measurement up to 10A: Accurately measures AC and DC current for diagnosing electrical issues.
• Sababaraha Fungsi Pangukuran: Ngawengku Voltage, Resistance, Continuity, Diode, and Capacitance.
• Input Terminal for AC/DC Current Measurements: Dedicated input for current measurements up to 10A.

2. Émbaran Kasalametan

Salawasna patuh kana tindakan pencegahan kaamanan nalika nganggo alat uji listrik. Upami henteu dilakukeun, éta tiasa nyababkeun cilaka atanapi karusakan kana méter atanapi alat anu diuji.

• Baca pituduh: Read and understand all instructions and safety information before use.
• Pamakéan ditangtoskeun: Use the multimeter only as specified in this manual; otherwise, the protection provided by the multimeter might be impaired.
• Dipeunteun Voltage: Ulah nerapkeun leuwih ti dipeunteun voltage, as marked on the multimeter, between the terminals or between any terminal and earth ground.
• Pariksa Prospek: Inspect test leads for damaged insulation or exposed metal. Replace damaged leads.
• Hindari Sirkuit Hirup: Do not use the multimeter on live circuits with exposed conductors or bus bars.
• Alat Pelindung Diri (APD): Always wear appropriate personal protective equipment, such as safety glasses and insulated gloves, when working with electrical systems.
• CAT III 600V: This meter is rated for CAT III 600V. Do not use it in environments exceeding this rating.

3. Naon dina Box

Your Fluke 15B+ Digital Multimeter package includes the following items:

• Fluke 15B+ Digital Multimeter
• TL75 Test Leads
• 2 Batré AA (parantos dipasang atanapi kalebet nyalira)

Image: The Fluke 15B+ Digital Multimeter shown alongside its red and black TL75 test leads and protective caps.

4. Setélan

4.1 Pamasangan batré

The Fluke 15B+ requires two AA batteries for operation. These are typically included with your purchase.

1. Pastikeun multimeter dina kaayaan OFF.
2. Teang panutup kompartemen batré dina tonggong multimeter.
3. Anggo obeng pikeun ngaleupaskeun sekrup anu ngamankeun panutupna.
4. Remove the cover and insert the two AA batteries, observing the correct polarity (+/-) as indicated inside the compartment.
5. Pasang deui panutup kompartemen batré teras kencengkeun sekrupna.

4.2 Nyambungkeun Test Leads

Sambungan kabel tés anu leres penting pisan pikeun pangukuran anu akurat sareng aman.

1. Selapkeun hideung kabel uji kana COM colokan input (umum).
2. Pikeun kalolobaan voltage, resistance, continuity, diode, and capacitance measurements, insert the beureum kabel uji kana VΩHzCAP input jack.
3. For current measurements (mA/A), insert the beureum test lead into the appropriate current input jack (e.g., mA/A or 10A FUSED), depending on the expected current level. Refer to the multimeter's faceplate for specific jack labels.

5. Parentah Operasi

5.1 Operasi Umum

1. Hurungkeun/Pareuman: Rotate the central dial from the OFF position to any desired measurement function to turn the meter on. Rotate back to OFF to power off.
2. Pilihan fungsi: Use the central rotary dial to select the desired measurement function (e.g., V~ for AC Voltage, V- pikeun Voltase DCtage, Ω for Resistance).
3. Tombol rentang: Pencét éta jajaran button to manually select a measurement range if auto-ranging is not desired. Press again to cycle through ranges or hold to return to auto-ranging.
4. Tombol TAHAN: Pencét éta TAHAN tombol pikeun ngabekukeun bacaan ayeuna dina tampilan. Pencét deui pikeun ngaleupaskeun.
5. Tombol lampu tukang: Press the backlight button (sun icon) to illuminate the display in low-light conditions.

Image: A gloved hand holding the Fluke 15B+ Digital Multimeter, demonstrating its ergonomic design.

5.2 Fungsi Pangukuran

5.2.1 AC/DC Voltage Pangukuran

1. Hurungkeun kenop rotary ka V~ (Vol. ACtage) atawa V- (DC Voltagjeung).
2. Connect the black test lead to the COM terminal and the red test lead to the VΩHzCAP terminal.
3. Carefully touch the test probes to the points where voltage is to be measured (in parallel with the circuit).
4. Baca voltage nilai dina tampilan.

5.2.2 Pangukuran Arus AC/DC

Awas: Always ensure the circuit is de-energized before connecting the multimeter in series for current measurements. Incorrect connection can blow the fuse or damage the meter.

1. Hurungkeun kenop rotary ka A~ (Arus AC) atanapi A- (DC Current).
2. Sambungkeun lead test hideung ka terminal COM.
3. For currents up to 400mA, connect the red test lead to the mA/A terminal. For currents up to 10A, connect the red test lead to the 10A FUSED Terminal.
4. Buka sirkuit tempat arus rék diukur teras sambungkeun multimeter sacara séri.
5. Re-energize the circuit and read the current value on the display.

Image: The Fluke 15B+ Digital Multimeter connected to an electrical panel, displaying a voltage maca.

5.2.3 Résistansi Ukur

1. Hurungkeun kenop rotary ka Ω (Resistance).
2. Connect the black test lead to COM and the red test lead to VΩHzCAP.
3. Ensure the component or circuit under test is de-energized.
4. Touch the test probes across the component or circuit.
5. Maca nilai résistansi dina tampilan.

5.2.4 Tés Continuity

1. Hurungkeun kenop rotary kana Kasaluyuan symbol (looks like a sound wave).
2. Connect the black test lead to COM and the red test lead to VΩHzCAP.
3. Pastikeun sirkuit anu diuji teu boga daya.
4. Touch the test probes across the points to be tested.
5. The meter will beep if a continuous path (low resistance) is detected. The display will show the resistance value.

5.2.5 Tés Dioda

1. Hurungkeun kenop rotary kana Dioda symbol (looks like an arrow with a bar).
2. Connect the black test lead to COM and the red test lead to VΩHzCAP.
3. Pastikeun dioda geus dicabut tina sirkuit.
4. Tempelkeun probe beureum ka anoda sareng probe hideung ka katoda. Voltase majutage drop (e.g., 0.5V to 0.8V for silicon diodes) should be displayed.
5. Balikkeun probe-na. Layarna kedah nunjukkeun OL (Open Loop) pikeun dioda anu saé.

5.2.6 Pangukuran Kamampuh

1. Hurungkeun kenop rotary kana Kapasitansi symbol (looks like two parallel lines).
2. Connect the black test lead to COM and the red test lead to VΩHzCAP.
3. Pastikeun kapasitor discharged pinuh saméméh nguji.
4. Toélkeun probe tés kana terminal kapasitor.
5. Maca nilai kapasitansi dina tampilan.

Image: A technician wearing safety gear, using the Fluke 15B+ Digital Multimeter to take a reading inside an electrical panel.

6. Pangropéa

6.1 beberesih

Pikeun ngabersihkeun multimeter, usap wadahna ku adamp lawon sareng deterjen hampang. Entong nganggo bahan abrasif atanapi pangleyur. Pastikeun méterna garing pisan sateuacan dianggo.

6.2 Ngagantian batré

Replace the batteries when the low battery indicator appears on the display. Refer to Section 4.1 for battery installation instructions.

6.3 Ngagantian sekering

If the current measurement function stops working, the fuse may need replacement. Always replace with a fuse of the specified type and rating to maintain safety and performance.

1. Pastikeun multimeter dipareuman sareng kabel tés dicabut.
2. Open the battery compartment cover as described in Section 4.1.
3. Taliti nyabut sekering heubeul.
4. Install a new fuse of the correct type and rating (refer to the specifications section or the meter's internal markings).
5. Pasang deui panutup kompartemen batré teras kencengkeun sekrupna.

7. Cara ngungkulan

• Henteu aya tampilan: Pariksa pamasangan batré sareng ngecasna. Ganti batré upami diperyogikeun.
• Bacaan anu salah: Ensure test leads are correctly connected to the appropriate input jacks for the selected function. Verify the rotary dial is set to the correct measurement function. Check for damaged test leads.
• Pangukuran Arus Teu Jalan: Check the fuse. Replace if blown (refer to Section 6.3). Ensure the red test lead is in the correct current input jack.
• "OL" Display: This typically means "Overload" or "Open Loop." For resistance, it indicates an open circuit. For diode test, it indicates a reverse-biased good diode. For voltage/current, it means the measured value exceeds the selected range (if not in auto-range) or the meter's maximum capability.

8. Spésifikasi

9. Garansi jeung Rojongan

The Fluke 15B+ Digital Multimeter is manufactured by Fluke Corporation. For detailed warranty information, technical support, or service, please refer to the official Fluke website or contact their customer service directly. Always ensure you purchase from authorized distributors to guarantee product authenticity and valid warranty coverage.

Pikeun sumberdaya tambahan sarta informasi produk, mangga buka Toko Fluke di Amazon.