BRESSER Temeo Quadro Temperature Station User Manual

Bubuka

The BRESSER Temeo Quadro Temperature Station is designed to monitor temperature and humidity at up to four different locations simultaneously. This system includes a main display unit and three remote sensors, allowing you to track environmental conditions both indoors and outdoors, or in various rooms of your home. The remote sensors transmit data wirelessly to the main unit via a 433 MHz radio signal.

Émbaran Kasalametan

• Baca sadaya parentah taliti samemeh make alat.
• Simpen manual ieu kanggo rujukan ka hareup.
• Entong ngalaan alat ka suhu anu ekstrim, sinar panonpoé langsung, atanapi kalembaban anu luhur.
• Hindarkeun ragrag atanapi ngagentoskeun alat kana tabrakan anu kuat.
• Ulah nyobian ngabongkar atanapi ngalereskeun alat nyalira. Hubungi petugas servis anu mumpuni.
• Buang batré anu dipaké sacara tanggung jawab nurutkeun peraturan lokal.

Eusi pakét

• 1x BRESSER Temeo Quadro Main Display Unit
• 3x Remote Sensors
• 1x Manual Pamaké (dokumén ieu)

Note: Batteries are not included. The main unit requires 3x AAA (LR03) batteries, and each remote sensor requires 2x AAA (LR03) batteries.

Produk Leuwihview

Unit Témbongkeun Utama

Gambar: Hareupeun view of the BRESSER Temeo Quadro main unit display. A clear view of the main unit's LCD screen, showing temperature and humidity values for four channels.

Gambar: Tukangeun view of the BRESSER Temeo Quadro main unit, showing control buttons and battery compartment. The back of the main unit includes buttons for 'CHANNEL', 'ALARM', 'MAX/MIN', and 'SET', along with the battery compartment cover.

• Layar LCD: Shows temperature and humidity for the main unit (IN) and up to three remote sensors (1, 2, 3).
• CHANNEL Button: Selects which remote sensor's data is displayed or cycles through channels.
• Tombol ALARM: Activates/deactivates temperature/humidity alarms.
• Tombol MAX/MIN: Displays maximum and minimum recorded values.
• Tombol SET: Enters setup mode for time, date, and alarm settings.
• Kompartemen batré: Located on the rear, for 3x AAA batteries.
• Stand terpadu: For desktop placement.

Sénsor jauh

Gambar: BRESSER Temeo Quadro remote sensor, front and back views. A remote sensor unit, showing its display on the front and the battery compartment and mounting hole on the back.

• Layar LCD: Shows its current temperature and humidity.
• Pindah saluran: Allows selection of channel 1, 2, or 3.
• Kompartemen batré: For 2x AAA batteries.
• Lubang Pamasangan: Pikeun témbok ningkatna.

Disetél

1. Pamasangan batré

1. For Remote Sensors:
   • Open the battery compartment cover on the back of each remote sensor.
   • Insert 2x AAA (LR03) batteries into each sensor, observing the correct polarity (+/-).
   • Set the channel switch (1, 2, or 3) on each sensor to a unique channel.
   • Tutup panutup kompartemen batré.
2. For Main Display Unit:
   • Buka panutup kompartemen batré di tukang unit utama.
   • Insert 3x AAA (LR03) batteries, observing the correct polarity (+/-).
   • Close the battery compartment cover. The main unit will power on and begin searching for sensor signals.

2. Pamasangan Sénsor

• After installing batteries in both the sensors and the main unit, the main unit will automatically attempt to connect with the remote sensors.
• Ensure the remote sensors are within range (typically up to 30 meters in open air) of the main unit during initial setup.
• The corresponding channel numbers (1, 2, 3) on the main unit's display will show readings once a connection is established. The 'IN' channel displays the main unit's internal readings.
• If a sensor does not connect, remove and reinsert its batteries, then press the 'CHANNEL' button on the main unit to initiate a new search.

3. Panempatan

• Place the main unit indoors in a central location, away from direct sunlight or heat sources.
• Position remote sensors in desired monitoring areas. For outdoor use, place sensors in a sheltered spot to protect them from direct rain and sun, which can affect accuracy and device longevity.

Parentah Operasi

Viewdina Suhu sareng Kelembapan

• The main display unit continuously shows the current temperature and humidity for the internal sensor ('IN') and the three remote sensors (1, 2, 3).
• The display also indicates comfort levels (e.g., 'COM' for comfortable, 'DRY' for dry, 'WET' for wet) based on humidity levels.

MAX/MIN Records

• Pencét éta MAX/MIN button once to display the maximum temperature and humidity recorded since the last reset.
• Pencét éta MAX/MIN button a second time to display the minimum temperature and humidity recorded.
• Pikeun ngahapus rékaman MAX/MIN, pencét terus tahan tombol MAX/MIN button for approximately 3 seconds while MAX or MIN values are displayed.

Pamilihan Unit Suhu (°C/°F)

• Dina unit utama, pencét SET tombol pikeun ngaganti antara Celsius (°C) sareng Fahrenheit (°F).

Setting Alarms (if applicable)

• Pencét éta alarem tombol pikeun asup ka modeu setelan alarem.
• Ngagunakeun éta SALURAN jeung MAX/MIN buttons to adjust the desired high and low temperature/humidity alarm thresholds for each channel.
• Pencét alarem again to confirm settings and activate the alarm. An alarm icon will appear on the display.
• When an alarm threshold is met, the unit will emit an audible alert and the corresponding channel's reading will flash.

Pangropéa

• beberesih: Ngusap alat ku lemes, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
• Ngagantian batré: Replace batteries when the low battery indicator appears on the display. Always replace all batteries in a unit at the same time.
• Panyimpenan: Upami nyimpen alat kanggo waktos anu lami, cabut sadaya batréna pikeun nyegah bocor.

Pamérésan masalah

spésifikasi

Garansi

This BRESSER product comes with a garansi dua taun against factory defects from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper use, accidents, unauthorized repairs, or normal wear and tear.

Ngarojong

For technical support, warranty claims, or further information, please visit the official BRESSER website or contact their customer service department. Refer to the packaging or the BRESSER websitus pikeun detil kontak panganyarna.

Online resources may include FAQs, additional manuals, and contact forms.