Buku Panduan Pangguna Freezer Reach-In 2-Panto True Mfg T-49F-HC

Bubuka

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your True Mfg T-49F-HC 2-Door Reach-In Freezer. Please read this manual thoroughly before operating the unit and retain it for future reference.

Produk Leuwihview

Gambar 1: True Mfg T-49F-HC 2-Door Reach-In Freezer. This image displays the full unit, highlighting its stainless steel construction, two self-closing doors with recessed handles, and the bottom-mounted refrigeration system with a louvered panel for air intake.

The True Mfg T-49F-HC is a commercial-grade, two-door reach-in freezer designed for professional food service environments. It features a high tensile strength stainless steel exterior and an NSF approved aluminum interior liner with a stainless steel floor. The unit is engineered to maintain cabinet temperatures of -10°F, ensuring optimal preservation of frozen goods. It utilizes eco-friendly R290 refrigerant and is UL listed and NSF-7 Compliant.

Setup sareng Instalasi

Ngabongkar bungkusan

• Taliti miceun sadaya bahan bungkusan, kalebet pita sareng film pelindung.
• Pariksa unitna pikeun milarian karusakan pengiriman. Laporkeun langsung ka operator pengiriman sareng supplier anjeun.
• Retain packaging materials for potential future shipping or claims.

panempatan

• Position the freezer on a strong, level surface capable of supporting its weight when fully loaded.
• Ensure adequate air circulation around the unit. Maintain a minimum of 6 inches (15 cm) of clearance from walls and other equipment for proper ventilation of the condenser.
• Ulah neundeun unit caket sumber panas (contona, oven, sinar panonpoé langsung) atanapi di tempat anu kalembabanna luhur.
• The unit comes with casters for mobility; ensure they are locked once the unit is in its final position.

Sambungan Listrik

• The freezer requires a dedicated 115V/60Hz/1-ph electrical outlet.
• The unit is equipped with a 9 ft cord and a NEMA 5-15P plug.
• Ulah make kabel extension atawa colokan adaptor.
• Ensure the electrical supply matches the requirements listed on the unit's data plate.

Parentah Operasi

Mimitian Mimiti

• After positioning and connecting to power, allow the unit to sit for at least 2 hours before turning it on. This allows refrigerants to settle.
• Turn on the unit using the power switch, typically located near the control panel.
• Allow the freezer to reach its operating temperature of -10°F before loading products. This may take several hours.

Kontrol Suhu

• The digital temperature display and controls are located on the top front of the unit.
• Refer to the specific control panel instructions for adjusting temperature settings. The factory preset is -10°F.
• Avoid frequent temperature adjustments.

Ngamuat Produk

• Distribute products evenly on the six adjustable, heavy-duty PVC coated wire shelves.
• Do not block air vents inside the cabinet, as this can impede airflow and affect cooling efficiency.
• Avoid overloading shelves beyond their rated capacity.

Operasi Panto

• The unit features self-closing, positive sealing swing doors.
• Pastikeun panto ditutup pageuh saatos dianggo pikeun ngajaga suhu sareng efisiensi énergi.
• The doors are equipped with 12-inch long recessed handles and locks for security.

Pangropéa

Ngabersihan rutin

• Luar: Clean the stainless steel exterior regularly with a mild soap and water solution and a soft cloth. Wipe in the direction of the grain. Avoid abrasive cleaners or scouring pads.
• Interior: Clean the NSF approved aluminum interior liner and stainless steel floor with a mild, non-abrasive cleaner. Rinse with clean water and dry thoroughly.
• Rak: Remove and clean the PVC coated wire shelves as needed.

Condenser Coil Cleaning (Monthly/Quarterly)

The condenser coil, located at the bottom of the unit, accumulates dust and debris, which can reduce efficiency and lead to compressor failure. Clean it regularly:

1. Pegatkeun sambungan unit tina catu daya.
2. Locate the louvered panel at the bottom front of the unit and remove it.
3. Use a stiff brush or vacuum cleaner with a brush attachment to remove dust and lint from the condenser fins. Be careful not to bend the fins.
4. Replace the louvered panel and reconnect power.

Door Gasket Inspection

• Regularly inspect the door gaskets for cracks, tears, or signs of wear.
• Ensure gaskets form a tight seal when the doors are closed. A poor seal can lead to temperature fluctuations and increased energy consumption.
• Clean gaskets with warm, soapy water. Replace damaged gaskets promptly.

Pamérésan masalah

Sateuacan ngahubungan jasa, ulangview masalah umum sareng solusi ieu:

Upami masalah tetep saatos nyobian solusi ieu, mangga ngahubungi teknisi jasa anu mumpuni.

spésifikasi

Garansi sareng Rojongan

Émbaran jaminan

• 3-Year Warranty on Labor: Covers labor costs for repairs due to manufacturing defects.
• Garansi 3 Taun pikeun Suku Cadang: Covers replacement parts due to manufacturing defects.
• Additional 2 Years (5 Years Total) on Compressor: Extends compressor warranty to a total of five years.

For detailed warranty terms and conditions, please refer to the official True Manufacturing warranty document or contact True customer service.

Rojongan Palanggan

For technical assistance, parts, or warranty claims, please contact True Manufacturing customer support. Have your model number (T-49F-HC) and serial number ready when you call.

Anjeun oge bisa nganjang ka resmi Toko TRUE di Amazon pikeun inpo nu leuwih lengkep jeung sumberdaya produk.