Dioche 125 KHz RFID Access Control Module User Manual

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of the Dioche 125 KHz RFID Access Control Module. This module is designed for integrated access control systems, offering reliable card reading capabilities.

2. Émbaran Kasalametan

Pastikeun catu daya voltage is within the specified range (9-12V DC) to prevent damage to the module.
Avoid exposing the module to moisture, extreme temperatures, or corrosive environments.
Handle the circuit board with care to prevent electrostatic discharge (ESD) damage.
Do not attempt to modify the module unless explicitly instructed, as this may void the warranty and cause malfunction.

3. Produk Langkungview

The Dioche 125 KHz RFID Access Control Module is an integrated unit designed for reading 125 KHz RFID cards. It features a compact design and stable performance for various access control applications.

Fitur konci:

Integrated RFID module for access control.
Effective card reading distance: 5 to 15 cm.
Professional production for stable performance.

Idéntifikasi komponén:

Diagram of the RFID module with labeled components — **Gambar 3.1:** Labeled diagram of the Dioche RFID module. Key components include J1 Main Connection Block, S1/S2 Setting Terminals, Buzzer, Indicating LED, J2 Infrared Port, S3 Relay Output Selection, and Antenna Interface J3-AJ3-B.

The module includes various connection points and indicators:

J1 Main Connection Block: Primary terminal for power and data connections.
S1/S2 Setting Terminal: Used for configuring module settings.
Buzzer: Provides audible feedback for operations.
Indicating LED: Visual status indicator.
J2 Infrared Port: For infrared communication or programming (if supported by external tools).
S3 Relay Output Selection: Configures the relay output behavior.
Antenna Interface J3-AJ3-B: Connection point for the external RFID antenna coil.

Pahareup-hareup view of the RFID module highlighting its integrated access control features — **Gambar 3.2:** Diwincik view of the RFID module, showing its integrated components and the relay for access control.

4. Setup jeung Instalasi

Follow these steps to properly set up your RFID access control module.

4.1 Wiring the Module

The module requires a 9-12V DC power supply. Connect the power and data lines to the J1 Main Connection Block according to your system's requirements. Ensure correct polarity.

Multi-colored wiring harness for connecting the RFID module — **Gambar 4.1:** Example of a multi-colored wiring harness typically used for connecting electronic modules, including power and data lines.

4.2 Nyambungkeun anteneu

Connect the provided antenna coil to the Antenna Interface J3-AJ3-B. The antenna is crucial for reading RFID cards.

Close-up of the RFID antenna coil — **Gambar 4.2:** The RFID antenna coil, responsible for transmitting and receiving radio frequency signals to read cards.

4.3 Majelis ahir

Once the wiring and antenna are connected, the module is ready for integration into your access control system.

The RFID module with its antenna connected — **Gambar 4.3:** The Dioche RFID module with the antenna coil properly connected, ready for operation.

5. Parentah Operasi

This section outlines the basic operation of the RFID module.

5.1 Powering On

After connecting the power supply, the module will power on. The Indicating LED will illuminate, and the Buzzer may emit a short tone to confirm startup.

5.2 Reading RFID Cards

Present a 125 KHz RFID card or tag within 5 to 15 cm of the antenna coil. Upon successful reading, the module will typically provide an audible beep from the Buzzer and/or a change in the Indicating LED status. The data from the card will be transmitted via the data lines connected to J1.

5.3 Kaluaran Relay

The module features a relay output, which can be configured via the S3 Relay Output Selection. This relay can be used to control an electronic lock or other access mechanism based on successful card authentication.

5.4 Programming (Advanced)

While the module is designed for integrated systems, some advanced functions like adding or deleting RFID tags may require dedicated programming cards or an infrared remote control. These accessories are typically not included with the module and must be sourced separately if required for your application.

6. Pangropéa

The Dioche RFID module is designed for low maintenance. Follow these guidelines to ensure its longevity:

Jaga modul tetep bersih sareng bébas tina lebu sareng kokotor.
Regularly check all wiring connections for security and integrity.
Avoid physical impact or excessive vibration.

7. Cara ngungkulan

If you encounter issues with your RFID module, refer to the following troubleshooting tips:

7.1 Module Not Powering On

Check the power supply: Ensure it is providing 9-12V DC and is correctly connected to the J1 Main Connection Block.
Verify polarity: Incorrect power polarity can prevent the module from operating.

7.2 Poor Card Reading Sensitivity

Penempatan anteneu: Ensure the RFID card is within the effective reading range (5-15 cm) of the antenna.
Sambungan Antenna: Verify the antenna is securely connected to the J3-AJ3-B interface.
Gangguan Lingkungan: Metal objects or strong electromagnetic fields near the antenna can reduce reading performance. Try relocating the module or antenna.
Antenna Cable Extension: Extending the antenna cable significantly can weaken the signal and reduce sensitivity. If an extension is necessary, use shielded cables and keep the length to a minimum.

7.3 No Response to Cards

Jenis kartu: Confirm that you are using 125 KHz RFID cards, as the module is designed specifically for this frequency.
Status modul: Check the Indicating LED to ensure the module is powered and operational.

8. Spésifikasi

Fitur	Spésifikasi
merek	Dioche
Nomer modél	6512458
Operasi Voltage	9-12VDC
Frékuénsi RFID	125 KHz
Effective Reading Distance	5-15 cm
Produsén	Dioche
ASIN	B01M33NEW0
Negara asal	Cina

9. Garansi jeung Rojongan

Kanggo inpormasi garansi sareng dukungan téknis, mangga tingal dokuméntasi anu disayogikeun sareng pameseran anjeun atanapi ngahubungi pangecér anjeun. Simpen bukti pameseran anjeun pikeun klaim garansi.

Dioche 6512458