1. Bubuka
This manual provides essential information for the safe and efficient use of your Einhell Power X-Change 18V 4.0Ah Lithium-Ion Battery and Fast Charger Starter Kit. This kit is designed to power all tools within the Einhell Power X-Change family, offering cordless flexibility for various applications.
Image 1.1: The Einhell Power X-Change 18V 4.0Ah battery and fast charger kit.
The Power X-Change system ensures compatibility across a wide range of Einhell tools, allowing you to use the same battery and charger for multiple devices.
Image 1.2: The Einhell Power X-Change system demonstrating compatibility with various tools.
2. Persiapan sareng Pangisian Daya Awal
Before first use, ensure the battery is fully charged. The fast charger is designed for quick and efficient charging.
2.1 Ngecas Batré
- Sambungkeun pangisi daya gancang ka stop kontak anu cocog.
- Insert the 18V 4.0Ah Lithium-Ion battery into the charger. Ensure it clicks securely into place.
- The charger's 6-level LED indicator will show the charging status. A full charge typically takes approximately 75 minutes.
Image 2.1: The battery correctly inserted into the fast charger for charging.
Image 2.2: Close-up of the charger's 6-level LED indicator.
The intelligent charging system monitors the battery to ensure optimal charging and extended battery life. The charger also features a "Refresh mode" for reactivating deeply discharged batteries.
Gambar 2.3: Detil view of the battery and charger features, including LED indicators and Refresh mode.
2.2 Wall Mounting the Charger
The charger can be conveniently mounted on a wall using its integrated suspension eyelets.
Image 2.4: Underside of the charger with wall mounting points.
3. Parentah Operasi
3.1 Masang sareng Cabut Batré
- To attach the battery: Align the battery with the battery slot on your Einhell Power X-Change tool and slide it in until it clicks into place.
- To remove the battery: Press the release button(s) on the battery and slide it out of the tool. Use the grip recesses for easier removal.
Image 3.1: Demonstrating battery removal from a tool.
3.2 Mariksa Tingkat Ngeusi batre
The battery features a 3-position LED indicator to show the current charge level. Press the button on the battery to activate the indicator.
Image 3.2: Checking the battery charge level using the 3-position LED indicator.
3.3 Twin-Pack Technology
For applications requiring 36V power, two 18V Power X-Change batteries can be used together in compatible tools (Twin-Pack technology).
Image 3.3: Twin-Pack technology for 36V power applications.
4. Pangropéa sarta perawatan
- Panyimpenan batré: Simpen batré di tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
- beberesih: Clean the battery and charger with a soft, dry cloth. Do not use liquids or abrasive cleaners.
- Ngecas calakan: The intelligent charging system helps prolong battery life by preventing overcharging and deep discharge.
- Modeu Anyarkeun: If a battery is deeply discharged, the charger's Refresh mode can attempt to reactivate it.
- Perlindungan: The battery features a robust housing with soft-grip surfaces for high shock protection and secure handling.
Image 4.1: The battery's robust housing designed for protection and grip.
5. Cara ngungkulan
This section addresses common issues you might encounter with your Einhell Power X-Change battery and charger.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Batré teu ngecas | Charger not connected to power; battery not properly inserted; battery too hot/cold; battery deeply discharged. | Ensure charger is plugged in. Re-insert battery firmly. Allow battery to reach room temperature. Use Refresh mode if applicable. |
| LED indicator on battery not lighting up | Battery completely discharged; button not pressed correctly. | Charge the battery. Ensure the button is pressed firmly. |
| Charger LED shows error | Battery fault; charger fault; battery temperature outside operating range. | Refer to the charger's specific LED error codes (if available in separate documentation). Allow battery to cool down or warm up. If problem persists, contact customer support. |
For further assistance, please refer to the official Einhell support channels.
6. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| merek | Einhell |
| Nomer modél | Kakuatan X-Robah |
| Jenis Batré | Litium-Ion |
| Batré Voltage | 18 V |
| Kapasitas batré | 4.0 ahk |
| Waktu Ngecas | Kira-kira. 75 menit |
| Dimensi produk | 12.8 x 10.5 x 5.7 cm |
| Beurat produk | 1.13 kg |
| Fitur husus | 3-position LED charge indicator (battery), 6-position LED charge indicator (charger), Intelligent charging system, Refresh mode, Microprocessor control, Twin-Pack capability. |
7. Garansi jeung Rojongan
Einhell offers a voluntary extended warranty for Power X-Change batteries and devices. To activate the 3-year warranty for your battery, you must register your product within 30 days of purchase on the official Einhell websitus.
For detailed warranty terms, product registration, or technical support, please visit the official Einhell websitus atanapi ngahubungan layanan palanggan maranéhna.
Catetan: Simpen bukti pameseran anjeun pikeun klaim garansi.
8. Émbaran Kasalametan
- Always use the battery and charger according to the instructions provided.
- Do not expose the battery or charger to moisture, rain, or extreme temperatures.
- Do not attempt to open or modify the battery or charger.
- Buang batré sacara tanggung jawab nurutkeun peraturan lokal.
- Jauhkeun tina jangkauan barudak.
