Legrand 36925 ATLANTIC Electrical Enclosure Instruction Manual

1. Bubuka

This instruction manual provides essential information for the safe and proper installation, operation, and maintenance of the Legrand 36925 ATLANTIC Electrical Enclosure. Please read this manual thoroughly before proceeding with any work involving the enclosure. Retain this manual for future reference.

2. Émbaran Kasalametan

WARNING: Electrical work should only be performed by qualified and authorized personnel. Failure to follow these safety instructions may result in electric shock, fire, serious injury, or death.

• Always disconnect power at the main supply before installing, servicing, or performing any work inside the enclosure.
• Ensure all local and national electrical codes and regulations are strictly followed.
• Anggo alat pelindung pribadi (PPE) anu cocog sapertos sarung tangan insulasi sareng kacamata kaamanan.
• Verify that the enclosure is properly grounded according to electrical standards.
• Do not modify the enclosure in any way that could compromise its protective rating or structural integrity.

3. Produk Langkungview

The Legrand 36925 ATLANTIC is a robust, empty electrical enclosure designed for housing and protecting electrical and electronic components in various environments. Its sturdy construction ensures durability and reliable performance.

This image displays the Legrand 36925 ATLANTIC electrical enclosure. It is a light grey, rectangular metal box designed to house electrical components, featuring a small black locking mechanism on the front door. The enclosure is shown from a slight angle, highlighting its depth and solid construction.

4. Setup jeung Instalasi

Proper installation is crucial for the safety and longevity of the enclosure and its contents. It is recommended that installation be carried out by a certified electrician.

1. Lokasi Pasang: Select a suitable, stable, and accessible location for mounting the enclosure. Ensure the surface can support the weight of the enclosure and its internal components.
2. Pamasangan: Secure the enclosure to the chosen surface using appropriate fasteners (not included) through the designated mounting points. Ensure the enclosure is level and firmly attached.
3. Éntri kabel: Plan for cable entry points. If drilling is required, ensure proper sealing methods (e.g., cable glands) are used to maintain the enclosure's ingress protection rating.
4. Internal Component Installation: Install electrical components (e.g., terminal blocks, circuit breakers, control devices) within the enclosure according to their respective manufacturer's instructions and relevant electrical standards.
5. Grounding: Connect the enclosure to a reliable earth ground using the designated grounding terminal.
6. Sealing: Ensure all gaskets and seals are correctly seated and undamaged to maintain the enclosure's protective rating against dust and water ingress.

5. Parentah Operasi

As an empty enclosure, its primary function is passive protection. Operation mainly involves ensuring the door is securely closed and locked.

• Panutupan panto: Always ensure the enclosure door is fully closed and latched after accessing the internal components.
• Mékanisme ngonci: Use the integrated locking mechanism to secure the door and prevent unauthorized access.
• Perlindungan Lingkungan: Verify that the enclosure's seals are intact to protect internal components from dust, moisture, and other environmental factors.

6. Pangropéa

Regular maintenance helps ensure the continued protective function and longevity of the enclosure.

• Inspeksi périodik: Regularly inspect the enclosure for any signs of damage, corrosion, or wear, especially on seals and hinges.
• beberesih: Clean the exterior of the enclosure with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or seals.
• Integritas segel: Check the door gasket and any cable gland seals for cracks, hardening, or displacement. Replace damaged seals immediately to maintain the ingress protection rating.
• Mékanisme konci: Ensure the lock operates smoothly. Lubricate if necessary with a suitable non-conductive lubricant.

7. Cara ngungkulan

Most issues related to an empty enclosure are physical. If you encounter problems, consider the following:

• Panto Teu Nutup kalawan Bener: Check for obstructions, bent hinges, or damaged latching mechanisms. Ensure the enclosure is mounted squarely.
• Water/Dust Ingress: Inspect all seals (door gasket, cable glands, mounting points) for damage or improper seating. Replace or re-seat as necessary.
• Korosi: If corrosion appears, clean the affected area and apply a suitable protective coating. Address the environmental cause if possible.

For issues beyond basic troubleshooting, contact Legrand customer support or a qualified technician.

8. Spésifikasi

9. Garansi jeung Rojongan

This Legrand product is covered by a Global Legrand Warranty. For specific warranty terms and conditions, please refer to the official Legrand website or contact your local Legrand representative.

For technical support, spare parts, or further assistance, please contact Legrand customer service. Ensure you have your product model number (36925) and purchase details available when contacting support.