Indesit Aria PAA642/IBK 58cm Gas Hob Manual pamaké

1. Bubuka

Thank you for choosing the Indesit Aria PAA642/IBK 58cm Gas Hob. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new appliance. Please read these instructions carefully before using the hob and keep them for future reference.

Inpormasi Kaamanan Penting:

• This appliance must be installed by a qualified technician in accordance with local regulations and standards.
• Pastikeun ventilasi anu nyukupan di daérah dapur.
• Ulah nyimpen bahan kaduruk deukeut hob.
• Always supervise cooking and never leave the hob unattended when in use.
• Jauhkeun barudak tina alat salami operasi.
• After use, ensure all control knobs are in the 'OFF' position.

Figure 1: Indesit Aria PAA642/IBK 58cm Gas Hob. This image displays the Indesit Aria PAA642/IBK 58cm Gas Hob. It features a sleek black enamel surface, four gas burners with sturdy pan supports, and four rotary control knobs located on the right side for easy operation. The Indesit logo is visible on the control panel.

2. Setup jeung Instalasi

The installation of this gas hob must be carried out by a qualified and registered gas installer, in compliance with all relevant national and local regulations.

2.1 Ngabongkar bungkusan

Carefully remove the hob from its packaging. Check for any damage that may have occurred during transit. Report any damage immediately to your supplier.

2.2 Diménsi sareng Potongan

The hob is designed for drop-in installation into a countertop. Ensure the countertop material is heat-resistant.

• Ukuran produk (L x W x H): 4.0 cm x 58.0 cm x 51.0 cm (approximately 1.57 x 22.83 x 20.08 inches)
• Minimum Distance to Cooker Hood: 75 cm

Refer to the installation template (if provided with the product) for precise cut-out dimensions. Maintain adequate clearance from adjacent walls and cabinets.

2.3 Sambungan Gas

This appliance is designed for use with natural gas. An LPG conversion kit is included if you need to use Liquefied Petroleum Gas. The gas connection must be performed by a qualified professional.

2.4 Sambungan Listrik

The hob requires an electrical connection for the push-button ignition system. Connect the appliance to a properly grounded electrical outlet. Power requirements are standard household plug.

3. Parentah Operasi

Your Indesit Aria gas hob features four burners with varying power outputs, controlled by easy-to-use rotary dials and a push-button ignition.

3.1 Ngahurungkeun Kompor

1. Ensure the pan supports are correctly positioned over the burners.
2. Teundeun cookware anjeun dina burner dipikahoyong.
3. Push and turn the corresponding control knob counter-clockwise to the maximum flame position (large flame symbol).
4. Simultaneously press the ignition button (usually marked with a spark symbol). You will hear a clicking sound as the igniter sparks.
5. Once the flame ignites, continue to hold the control knob down for a few seconds (approximately 5-10 seconds) to allow the thermocouple to heat up and activate the flame failure device.
6. Release the control knob. If the flame goes out, repeat steps 3-5.

3.2 Nyaluyukeun seuneu

Once the burner is lit, you can adjust the flame intensity by rotating the control knob:

• Turn counter-clockwise towards the small flame symbol for a lower flame.
• Turn clockwise towards the large flame symbol for a higher flame.
• The burner power range is typically between 1 KW and 3 KW, depending on the burner size.

3.3 Pareuman burner a

To turn off a burner, rotate the control knob clockwise until it clicks into the 'OFF' position (usually marked with a dot or '0').

4. Pangropéa jeung beberesih

Regular cleaning and maintenance will ensure the longevity and optimal performance of your gas hob. Always ensure the hob is cool and disconnected from the power supply before cleaning.

4.1 Ngabersihkeun Permukaan Kompor

• The black enamel hob surface is easy to clean. Use a soft cloth or sponge with warm soapy water.
• For stubborn stains, use a non-abrasive cleaner specifically designed for enamel surfaces.
• Avoid abrasive pads, scourers, or harsh chemicals as they can damage the surface.
• Ngusap garing ku lawon bersih pikeun nyegah tanda cai.

4.2 Cleaning Pan Supports and Burner Components

• The enamel pan supports can be removed for cleaning. Wash them in warm soapy water or place them in a dishwasher if suitable (check product specifications for dishwasher compatibility).
• The burner caps and crowns can also be removed. Clean them with warm soapy water and a soft brush. Ensure they are completely dry before reassembling.
• Periodically check the burner holes for any blockages and clean them gently with a fine brush or needle if necessary.
• Ensure all burner components are correctly reassembled before using the hob again. Incorrect assembly can lead to uneven flames or ignition issues.

4.3 Kenop Kontrol

The rotary control dials can be pulled off for cleaning. Wipe them with a damp cloth and mild detergent. Ensure they are dry before reattaching.

5. Cara ngungkulan

Sateuacan ngahubungan layanan palanggan, mangga tingal pituduh ngungkulan ieu di handap pikeun masalah umum.

Upami masalah tetep saatos nyobian solusi ieu, mangga ngahubungi teknisi jasa anu mumpuni.

6. Spésifikasi