UNI-T UT210E Mini Digital Clamp Manual Méter Méter

1. Émbaran Kasalametan

Please read and understand all safety warnings and operating instructions before using this instrument. Failure to follow these instructions could result in electric shock, fire, or serious injury.

• Salawasna taat kana kode kaamanan lokal jeung nasional.
• Do not use the meter if it appears damaged or if the insulation is compromised.
• Ensure the function switch is in the correct position before making any measurement.
• Ulah ngukur voltage exceeding the specified maximum input value (CAT III 300V, CAT II 600V).
• Use extreme caution when working with live circuits.
• Simpen ramo di tukangeun panghalang probe nalika ngukur.
• Ganti batréna nalika indikator batré lemah némbongan pikeun mastikeun bacaan anu akurat.

2. Produk Langkungview

The UNI-T UT210E is a compact, high-reliability, and safe mini digital clamp meter designed for precise electrical measurements. It features True RMS for accurate readings of non-sinusoidal waveforms, Non-Contact Voltage (NCV) detection, and a Variable Frequency Control (VFC) function for measurements in variable frequency environments. The device includes an automatic ranging function, a clear LCD with backlight, data hold, and an auto power-off feature to conserve battery life.

2.1 Idéntifikasi komponén

Refer to the diagram below for the identification of key components of your UT210E clamp méter.

Gambar: Labeled diagram of the UNI-T UT210E Mini Digital Clamp Méter, nu némbongkeun clamp head, NCV sensing area, NCV warning light, NCV non-contact electroscope, clamp head trigger, function rotary switch, function buttons (Hold, Zero, Select/VFC), and LCD display.

• Clamp Kepala: Dianggo pikeun ngukur arus non-kontak.
• Clamp Pemicu Kepala: Opens the clamp sirah.
• Fungsi Saklar Putar: Selects measurement functions (current, voltage, resistance, diode, capacitance, continuity, NCV, VFC).
• Tombol Fungsi:
  • HOLD/Backlight: Freezes the current display reading; long press activates/deactivates backlight.
  • enol: Used for relative measurement or zeroing DC current.
  • SELECT/V.F.C: Toggles between functions within a rotary switch position (e.g., AC/DC, Diode/Continuity); long press activates VFC mode.
• Layar LCD: Némbongkeun bacaan pangukuran, unit, sareng indikator.
• NCV Sensing Area: Detects non-contact AC voltage.
• Input Jacks: For test leads (VΩHz, COM).

2.2 Ukuran produk

Gambar: The UNI-T UT210E Mini Digital Clamp Meter shown with its dimensions. The meter is approximately 190mm (7.5 inches) long, 45mm (1.8 inches) wide, and 30mm (1.2 inches) thick.

3. Setélan

3.1 Pamasangan batré

The UT210E requires two AAA 1.5V batteries for operation. Ensure the batteries are installed correctly before first use or when the low battery indicator appears on the display.

1. Teangan tempat panutup kompartemen batré dina tonggong méter.
2. Paké obeng pikeun loosen screw dina panutup batré.
3. Cabut panutup batré.
4. Insert two AAA 1.5V batteries, observing the correct polarity (+ and -).
5. Ganti panutup batré jeung tighten screw nu aman.

Gambar: The back of the UNI-T UT210E clamp meter showing the battery compartment with a warning label for battery replacement. The image also highlights the VFC function on the front display.

4. Parentah Operasi

This section details how to use the UNI-T UT210E for various measurements.

4.1 Daya Hurung/Pareuman

To power on the meter, rotate the function rotary switch from the "OFF" position to any desired measurement function. To power off, rotate the switch back to the "OFF" position. The meter will automatically power off after approximately 15 minutes of inactivity to save battery life.

4.2 Pangukuran Arus AC/DC

Paké clamp head to measure current without breaking the circuit.

1. Rotate the function switch to the 100A~, 20A~, or 2A~ position for AC current, or 100A, 20A, or 2A position for DC current.
2. Pencét clamp head trigger to open the clamp.
3. Lebetkeun ngan hiji konduktor nganggo clamp rahang. Pastikeun clamp geus ditutup pinuh.
4. Baca nilai ayeuna dina tampilan LCD.
5. For DC current, press the NOL button to zero the display before measurement if needed.

Gambar: Pahareup-hareup view of the UNI-T UT210E clamp head, showing its opening mechanism and the input jacks for test leads. This illustrates how to position the clamp sabudeureun konduktor a.

4.3 AC/DC Voltage Pangukuran

Pikeun ngukur voltage, anggo kabel tés anu disayogikeun.

1. Insert the red test lead into the VΩHz input jack and the black test lead into the COM input jack.
2. Rotate the function switch to the V~ (AC Voltage) or V (DC Voltage) posisi.
3. Sambungkeun lead test sacara paralel ka sirkuit atanapi komponén anu diuji.
4. Baca voltage nilai dina tampilan LCD.

4.4 Resistance, Diode, Capacitance, and Continuity Measurement

These functions also require the use of test leads.

1. Insert the red test lead into the VΩHz input jack and the black test lead into the COM input jack.
2. Rotate the function switch to the Ω (Resistance/Diode/Capacitance/Continuity) position.
3. Pencét éta PILIH button to cycle through Resistance (Ω), Diode Test, Capacitance (F), and Continuity modes.
4. Pikeun Résistansi: Sambungkeun kabel uji kana komponén.
5. Pikeun Uji Dioda: Connect the red lead to the anode and the black lead to the cathode.
6. For Capacitance: Discharge the capacitor before connecting the leads.
7. Pikeun Kontinuitas: Connect the leads across the circuit. An audible beep indicates continuity.

4.5 Non-Kontak Voltage (NCV) Deteksi

Fungsi NCV ngamungkinkeun deteksi gancang voltase ACtage tanpa kontak langsung.

1. Rotate the function switch to the NCV position.
2. Move the NCV sensing area of the meter close to the conductor or outlet.
3. The NCV warning light will illuminate, and an audible alarm will sound, with the display showing signal strength, indicating the presence of AC voltage.

Gambar: The UNI-T UT210E clamp meter demonstrating its NCV (Non-Contact Voltage) function near an electrical outlet. The display shows a signal strength indicator, and an audible alarm is indicated.

4.6 Variable Frequency Control (VFC) Function

The VFC function enables accurate measurement of voltage and current in circuits with variable frequency drives or other non-standard waveforms.

1. Rotate the function switch to the V~ (AC Voltage) or A~ (AC Current) position.
2. Pencét panjang PILIH/VFC button to activate VFC mode. The VFC indicator will appear on the display.
3. Proceed with your voltage or current measurement as usual.
4. Pencét panjang PILIH/VFC button again to exit VFC mode.

4.7 Nyimpen Data sareng Lampu Latar

• Tahan Data: Pencét éta TAHAN tombol pikeun freeze bacaan ayeuna dina tampilan. Pencét deui pikeun ngaleupaskeun.
• Lampu tukang: Pencét panjang TAHAN button to turn the LCD backlight on or off.

5. Pangropéa

5.1 Ngagantian batré

When the low battery indicator appears on the LCD, replace the batteries promptly to ensure accurate measurements. Refer to Section 3.1 for battery installation instructions.

5.2 beberesih

Lap c méternaasing jeung iklanamp lawon sareng deterjen anu hampang. Entong nganggo bahan abrasif atanapi pangleyur. Pastikeun méterna garing pisan sateuacan dianggo.

5.3 Panyimpenan

Upami méteran henteu dianggo kanggo waktos anu lami, cabut batréna pikeun nyegah bocor sareng karusakan. Simpen méteran dina lingkungan anu garing sareng tiis, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.

6. Cara ngungkulan

• Méterna teu hurung: Pariksa pamasangan batré sareng pastikeun batréna henteu béak.
• "OL" ditampilkeun: Indicates overload or out-of-range measurement. Select a higher range or check the circuit.
• Bacaan teu akurat: Check battery level, ensure test leads are properly connected, and verify the correct function is selected. Ensure the clamp jaws are fully closed for current measurements.
• Teu aya deteksi NCV: Pastikeun area sensor NCV cukup caket kana voltase AC.tage sumber.

7. Spésifikasi

The following table outlines the key technical specifications of the UNI-T UT210E Mini Digital Clamp Méter.

Gambar: An icon grid illustrating various features of the UNI-T UT210E, including AC and DC current, automatic shut-down, maximum display (1999), on-off beep, input impedance, data retention, LCD backlight, diode test, autoranging, capacitance measurement, resistance measurement, True RMS, NCV, input protection, zero measurement, and VFC.

8. Garansi jeung Rojongan

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or contact Uni-T customer service directly. Keep your purchase receipt as proof of purchase.