1. Bubuka
Thank you for choosing the Einhell TC-LD 25 Laser Distance Meter. This device is designed for quick and accurate measurement of distances up to 25 meters. Its compact design and user-friendly interface make it an ideal tool for various applications in construction, renovation, and DIY projects. Please read this manual carefully before using the device to ensure safe and optimal operation.
Figure 1: Einhell TC-LD 25 Laser Distance Meter
2. Émbaran Kasalametan
Alat ieu nganggo laser Kelas II. Perhatikeun tindakan pencegahan kaamanan ieu:
- Ulah neuteup langsung kana sinar laser.
- Ulah nunjuk sinar laser ka jalma atawa sato.
- Hindarkeun paparan panon langsung kana sinar laser.
- Ulah ngabongkar atanapi ngarobih alatna. Perbaikan ngan ukur kedah dilakukeun ku jalmi anu diidinan.
- Jauhkeun alat tina jangkauan barudak.
The laser diode operates at 635 nm.
3. Produk Langkungview
Familiarize yourself with the components of your Einhell TC-LD 25.
Gambar 2: Hareupeun View (Display, Buttons)
Gambar 3: Balik View (Battery Compartment)
Gambar 4: Sisi View
komponén:
- aperture laser: Ngaluarkeun sinar laser pikeun pangukuran.
- Layar tampilan: Shows measurement results, mode, and battery status.
- Measurement Button (ON/MEAS): Ngahurungkeun alat sareng ngamimitian pangukuran.
- Function/Unit Button (FUNC/UNIT): Cycles through measurement modes and changes units.
- Tombol Titik Rujukan: Switches between front and rear reference points.
- Clear/Off Button (C/OFF): Clears the last measurement or powers off the device.
- Kompartemen batré: Located at the back for AAA batteries.
4. Setélan
4.1 Pamasangan batré
The Einhell TC-LD 25 requires two (2) AAA alkaline batteries (not included).
- Open the battery compartment cover located on the back of the device (refer to Figure 3).
- Selapkeun dua batré AAA, mastikeun polaritasna bener (+/-).
- Tutup panutup kompartemen batré aman.
Gambar 5: Kompartemen Batré
5. Parentah Operasi
5.1 Hurungkeun / Pareum
- Pikeun Ngahurungkeun: Pencét éta ON/MEAS kancing. Laser bakal ngaktipkeun.
- Pareuman: Pencét jeung tahan tombol C/OFF button for a few seconds. The device also features an automatic shutdown function after 3 minutes of inactivity to conserve battery life.
5.2 Pangukuran Jarak Dasar
- Hurungkeun alat.
- Arahkeun sinar laser kana target.
- Pencét éta ON/MEAS tombol sakali. Jarak anu diukur bakal ditampilkeun dina layar.
5.3 Pangukuran Kontinyu (Min/Maks)
This mode allows you to track the minimum and maximum distances as you move the device.
- Pencét éta FUNC/UNIT button until the continuous measurement icon (often a running person or min/max symbols) appears on the display.
- Move the device slowly towards or away from the target. The display will continuously update the current, minimum, and maximum distances.
- Pencét ON/MEAS to stop continuous measurement and view the final minimum and maximum values.
Figure 6: Continuous Measurement Example
5.4 Ngaganti Titik Réferénsi
The device can measure from its front edge or its rear edge. The default is usually the rear edge.
- Pencét éta Titik Rujukan button to toggle between front and rear measurement. An icon on the display will indicate the active reference point.
Figure 7: Measuring from Rear Edge
Figure 8: Measuring from Front Edge
5.5 Ngarobah Unit
The device primarily uses metric units (meters).
- Pencét éta FUNC/UNIT button repeatedly to cycle through available units (e.g., m, ft, in).
6. Pangropéa
- Rapihkan alat dengan lembut, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
- Regularly check the battery compartment for corrosion. Remove batteries if the device will not be used for an extended period.
- Store the device in its included pouch in a dry, dust-free environment.
Figure 9: Included Carrying Pouch
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat teu hurung | Low or dead batteries; incorrect battery polarity | Ganti batré; pariksa polaritasna |
| Pangukuran anu teu akurat | Unstable surface; obstruction in laser path; extreme temperatures | Ensure stable measurement; clear path; operate within specified temperature range |
| Laser teu katingali | Bright ambient light; long distance measurement | Use in lower light conditions; use a target plate for long distances |
8. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Nomer modél | TC-LD 25 (2270075) |
| Rentang Ukur | 0.05 m - 25 m |
| Akurasi Pangukuran | +/- 3 mm / m |
| Kelas laser | Kelas II |
| Diode Laser | 635 nm |
| Nonaktipkeun Otomatis | 3 menit |
| Batré | 2 x AAA (Alkaline) |
| Ukuran (L x W x H) | 11.2 x 2.5 x 4 cm |
| Beurat | 70 g |
| Bahan | Acrylonitrile Butadiena Styrene |
| Peunteun Protection Internasional | IP54 (Water resistant) |
9. Garansi jeung Rojongan
Einhell products are manufactured with high-quality materials and undergo strict quality control. For any warranty claims or technical support, please refer to your purchase documentation or contact Einhell customer service.
Kasadiaan suku cadang di EU dijamin salami 1 taun.
For further information, visit the official Einhell store: Einhell Store
