Beninca Bull 1024C Automatic Slide Chain Gate Opener User Manual

1. Bubuka

Thank you for choosing the Beninca Bull 1024C Automatic Slide Chain Gate Opener. This system is designed for intensive use, providing reliable and secure operation for your sliding gate. It features an integrated energy-saving system (ESA SYSTEM) and can operate even during power failures with an optional battery pack. This manual provides essential information for the safe installation, operation, and maintenance of your gate opener.

Figure 1: Beninca Bull 1024C Automatic Slide Chain Gate Opener

2. Émbaran Kasalametan penting

Mangga baca sareng pahami sadaya pitunjuk kaamanan sateuacan dipasang sareng dioperasikeun. Gagal nuturkeun pitunjuk ieu tiasa nyababkeun tatu parah atanapi karusakan harta benda.

• Personil anu mumpuni: Pamasangan sareng pangropéa kedah dilakukeun ku tanaga anu mumpuni wungkul.
• Pegatkeun daya: Always disconnect power to the gate opener before performing any maintenance or adjustments.
• Bagian Pindah: Keep hands, feet, and clothing clear of the gate and its moving parts during operation.
• Barudak jeung Pets: Do not allow children or pets to play near the gate or its controls.
• Kaluaran Darurat: Familiarize yourself with the manual release mechanism for emergency situations.
• Obstruction Sensors: Ensure all safety devices, such as photocells and anti-crushing controls, are correctly installed and functioning.
• Kaayaan Lingkungan: The unit is designed for outdoor use but should be protected from direct water jets and extreme weather conditions.

3. Eusi Paket

Pastikeun yén sadaya komponén anu didaptarkeun di handap aya dina pakét anjeun:

• 1 x Beninca Bull 1024C Gate Opener with CPanel
• 1 x Panarima
• 2 x Remote Control units
• Mounting hardware (bolts, washers, etc.)
• konci release manual
• Adjustable magnetic stops
• Strong chain brackets

Figure 2: Typical package contents (illustration may vary)

4. Setup jeung Instalasi

This section outlines the general steps for installing the Beninca Bull 1024C gate opener. Refer to the detailed installation diagrams for precise measurements and wiring.

4.1 Ngapasang Operator

1. Prepare a stable, level concrete base for the operator. The 10-inch high-rise galvanized base should be securely anchored.
2. Position the operator unit ensuring proper alignment with the gate's chain.
3. Secure the operator to the base using appropriate anchor bolts.
4. Attach the strong chain brackets to the gate, ensuring they are aligned with the operator's sprocket.
5. Install the chain, ensuring it is taut but not overly tight, allowing for smooth movement.

Figure 3: Operator mounting and chain installation

4.2 Sambungan Listrik

All electrical connections must be performed by a qualified electrician in accordance with local regulations.

1. Ensure the main power supply is disconnected before opening the control panel.
2. Access the internal electronic board by removing the weather-resistant plastic cover.
3. Connect the 24Vdc power supply to the designated terminals on the control board.
4. Connect any external safety devices (photocells, safety edges) and accessories (keypads, intercoms) to their respective terminals.
5. Close the control panel cover securely to maintain weather resistance.

Figure 4: Electrical wiring diagram (consult full manual for details)

4.3 Adjusting Magnetic Stops

The adjustable magnetic stops define the gate's open and closed positions.

1. Manually move the gate to its desired fully open position.
2. Mount the 'open' magnetic stop on the gate rail so that it activates the sensor on the operator.
3. Repeat the process for the 'closed' position.
4. Fine-tune the positions for precise gate travel.

5. Operasi

5.1 Papasangan Jauh Jauh

The system includes a long-range radio-receiver and two remote controls. To pair additional remotes or re-pair existing ones:

1. Press the programming button on the receiver board (refer to the control panel diagram for exact location).
2. While the receiver is in programming mode, press the desired button on your remote control.
3. The receiver's LED will indicate successful pairing.
4. Test the remote control to ensure proper operation.

Figure 5: Remote control unit

5.2 Basic Gate Operation

• Pressing a paired remote control button will initiate the gate's movement (open or close).
• A second press during movement will stop the gate.
• A third press will reverse the gate's direction.
• The system features soft-start and soft-stop for smooth and quiet operation.

5.3 ESA System Functionality

The patented ESA (Energy-Saving-App) system ensures extremely low-power absorption. When the gate is not in use, the system enters a standby mode, effectively turning off to conserve energy. This contributes to the 24Vdc operator's efficiency for intensive use.

5.4 Kaluaran Manual

In case of power failure or malfunction, the gate can be operated manually using the provided key lock release mechanism. Insert the key into the lock on the operator and turn it to disengage the motor, allowing the gate to be moved by hand.

6. Pangropéa

Regular maintenance ensures the longevity and reliable operation of your Beninca Bull 1024C gate opener. Always disconnect power before performing any maintenance.

• Bulanan: Check the gate's movement for any obstructions or unusual noises. Ensure the chain is properly tensioned and lubricated.
• triwulanan: Inspect all electrical connections for corrosion or loose wiring. Test safety devices (photocells, anti-crushing control) for proper function.
• taunan: Have a qualified technician perform a comprehensive inspection of the entire system, including the motor, gearbox (aluminum gear-box grease-lubricated), and control board.
• beberesih: Keep the operator unit and surrounding area clean from debris, leaves, and dirt. The weather-resistant plastic cover should be wiped clean.

7. Guide ngungkulan

Bagian ieu ngabahas masalah umum anu anjeun tingali. Pikeun masalah teu didaptarkeun di dieu, kontak rojongan customer.

8. Spésifikasi Téknis

Key technical details for the Beninca Bull 1024C Automatic Slide Chain Gate Opener:

9. Garansi sarta Rojongan Palanggan

Beninca products are manufactured to high-quality standards. This product typically comes with a manufacturer's warranty covering defects in materials and workmanship. Please refer to your purchase documentation or contact your retailer for specific warranty terms and conditions.

For technical assistance, troubleshooting, or to inquire about spare parts, please contact your authorized Beninca dealer or customer support:

• Websitus: www.benica.com
• Surélék: support@beninca.com
• Telepon: Consult your regional Beninca distributor for local contact numbers.