Bubuka
This manual provides essential information for the safe and efficient operation of your Futaba Wall Charger. This charger is designed for use with Futaba 4PX and 18SZ transmitters and receivers, specifically for LifeP04 batteries. Please read this manual thoroughly before use.
Émbaran Kasalametan
PERHATOSAN: Produk ieu tiasa ngalaan anjeun ka bahan kimia kalebet timah, anu dipikanyaho ku Nagara California nyababkeun kanker sareng cacad kalahiran atanapi cilaka réproduktif sanés. Kanggo inpo nu leuwih lengkep buka www.P65Warnings.ca.gov.
- Ulah ngantepkeun carjer ka kalembaban atanapi suhu anu ekstrim.
- Use only with compatible Futaba LifeP04 batteries.
- Cabut tina stop kontak nalika teu dianggo.
- Ulah nyobian ngabongkar atawa ngaropéa carjer.
- Jauhkeun tina jangkauan barudak.
Produk Leuwihview
The Futaba Wall Charger is a compact and efficient power adapter designed for charging specific Futaba RC equipment.
Image: The Futaba Wall Charger, a black rectangular power adapter with an attached power cord and a barrel connector plug. The cord is coiled neatly next to the main unit.
Disetél
- Ngabongkar: Taliti cabut carjer tina bungkusanna.
- mariksa: Check the charger and its cable for any visible damage. Do not use if damaged.
- Nyambung ka Alat: Insert the barrel connector plug of the charger into the charging port of your compatible Futaba transmitter or receiver. Ensure a secure connection.
- Nyambung ka Daya: Plug the charger's AC prongs into a standard wall power outlet (Input Voltage: 240 Volt).
Parentah Operasi
Once connected to both the device and a power outlet, the charger will begin charging the connected LifeP04 battery.
- The charger is designed for automatic charging. There are no user-adjustable settings.
- Charging time will vary depending on the battery's capacity and current charge level.
- Disconnect the charger from the device and the wall outlet once charging is complete or if the device indicates a full charge.
Pangropéa
The Futaba Wall Charger requires minimal maintenance.
- beberesih: Wipe the charger with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Panyimpenan: Store the charger in a cool, dry place away from direct sunlight and moisture when not in use. Coil the cable neatly to prevent kinks or damage.
- Pamariksaan: Periodically inspect the cable and plug for any signs of wear or damage.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Carger teu jalan | Not plugged in correctly; Faulty outlet; Damaged charger/cable; Incompatible device/battery. | Ensure secure connections; Try a different outlet; Inspect for damage (do not use if damaged); Verify device/battery compatibility. |
| Alat teu ngecas | Device charging port issue; Battery issue; Charger not providing power. | Consult device manual; Test with another known good battery/charger if possible. |
If issues persist, contact Futaba customer support.
spésifikasi
- Ukuran produk: 3.6 x 3.2 x 1.25 inci
- Beurat barang: 4 ons (0.25 pon)
- Masukan Voltage: 240 volt
- Kaluaran Voltage: 7.2 volt
- Amperage: 0.2 Amps
- Wattage: 5.76 watt
- Alat anu cocog: Futaba Transmitters and Receivers (specifically 4PX, 18SZ models)
- Kasaluyuan Tipe Batré: HirupP04
- Tipe Pamasangan: Tembok Gunung
- Pabrikan: Futaba
Garansi sareng Rojongan
For warranty information and technical support, please refer to the official Futaba websitus atanapi ngahubungan layanan palanggan maranéhanana langsung.
Sumberdaya Online: Visit the official Futaba websitus pikeun FAQs, pendaptaran produk, jeung bahan rojongan tambahan.
Kontak Rojongan: Refer to your product packaging or the Futaba website for contact details (phone, email).