Bubuka
This manual provides instructions for the safe and efficient use of your Fosmon 24-Hour Mechanical Dual Outlet Timer, Model C-10681. This device is designed to automatically turn electrical appliances on and off at programmed times, offering convenience and potential energy savings. Please read these instructions thoroughly before operation and retain them for future reference.
Image: The Fosmon 24-Hour Mechanical Dual Outlet Timer, showing its compact design and rotating dial.
Émbaran Kasalametan
Punten perhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu atanapi karusakan kana alat:
- Kanggo dianggo di jero rohangan hungkul. Ulah kakeunaan cai atanapi kalembaban.
- Do not exceed electrical ratings: 125VAC, 15A, 1875W, 10A Tungsten, 3/4HP.
- Ensure the timer is securely plugged into a grounded 3-prong outlet.
- Cabut pangatur waktu ti stop kontak témbok saméméh beberesih.
- Do not disassemble or attempt to repair the timer. Contact customer support for assistance.
- Jauhkeun tina jangkauan barudak.
Gambar: Tukangeun view of the Fosmon timer showing the 3-prong plug and ETL certification label, indicating safety compliance.
Fitur produk
- 24-Hour Programmable: Set up to 24 ON/OFF cycles per day.
- 30-Minute Intervals: Program in increments as small as 30 minutes.
- Dua outlet: Power two devices simultaneously.
- Saklar Override Manual: Temporarily bypass programmed settings.
- Grounded 3-Prong Design: Mastikeun operasi aman.
- Kasaluyuan lega: Cocog jeung lamps, fans, small appliances, reptile lights, grow lights, and holiday decorations.
Image: Close-up of the timer's dial, highlighting its fully programmable nature with 30-minute increments.
Gambar: Sisi view of the timer showing two grounded outlets, illustrating its dual outlet design.
Image: Diagram showing the timer connected to various appliances like a coffee maker, lamp, fan, and stereo, demonstrating universal compatibility.
Image: The timer shown with examples of CFL, Incandescent, and LED light bulbs, indicating broad compatibility with different lighting types.
Parentah Setup
Follow these steps to set up your Fosmon mechanical timer:
- Nyiapkeun Pin: The timer comes with all pins in the DOWN position. To begin programming, pull KABEH the pins around the dial to the UP position. Each pin represents a 30-minute interval.
- Setel Waktos Ayeuna: Rotate the entire dial clockwise until the arrow indicator on the timer points to the current time. The dial is marked with numbers 1-12 and includes sun/moon icons to distinguish AM/PM (white half for AM, black half for PM).
- Program ON Times: Push the pins corresponding to the desired ON times TURUN. Pikeun example, if you want the device to turn on from 6:00 PM to 10:00 PM, push down the pins from the '6' mark in the black half to the '10' mark in the black half.
- Program OFF Times: The pins that remain in the UP position represent the OFF times.
- Sambungkeun Alat: Plug the appliance you wish to control into one or both of the timer's outlets.
- Plug in Timer: Insert the timer into a standard 3-prong wall outlet.
- Pariksa Posisi Switch: Ensure the manual override switch (located on the top or side) is set to the TIMER position (usually indicated by a clock icon or "ON" for timer mode, not "ALWAYS ON").
The timer will now cycle through the programmed ON and OFF times daily.
Image: The Fosmon timer in a home setting, illustrating its use for lighting control and its dual outlet capability.
Parentah Operasi
Once programmed, the timer operates automatically.
- Operasi otomatis: The timer will activate and deactivate connected devices according to your set schedule. The dial will continuously rotate, indicating the current time.
- Manual Override: The timer features a manual override switch, typically located on the top or side.
- To keep the connected device ON terus, slide the switch to the "ON" or "ALWAYS ON" position.
- To keep the connected device OFF continuously, slide the switch to the "OFF" position.
- To resume programmed operation, slide the switch back to the "TIMER" or clock icon position.
Image: A close-up of the timer, showing the manual override switch on the top edge.
Pangropéa
The Fosmon mechanical timer requires minimal maintenance.
- beberesih: Cabut pangatur waktu ti stop kontak témbok saméméh beberesih. Ngusap bagian luar ku kaén anu lembut sareng garing. Ulah make cleaners cair atawa bahan abrasive.
- Panyimpenan: If storing the timer for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Device does not turn ON/OFF at programmed times. |
|
|
| Dial timer teu muter. |
|
|
| Timer makes a ticking sound. | Normal operation for mechanical timers. | This is normal and indicates the timer is functioning. |
spésifikasi
| Spésifikasi | Nilai |
|---|---|
| Nomer modél | C-10681 |
| Peunteun Listrik | 125VAC, 15A, 1875W |
| Rating Tungsten | 10A |
| Peunteun Motor | 3/4HP |
| Frékuénsi | 60Hz |
| Waktu Setélan Minimum | 30 menit |
| Daily Programs | Up to 24 ON/OFF settings |
| Outlet | 2 outlet grounded |
| Sertifikasi | ETL Didaptarkeun |
| Dimensi produk | 7.5 x 6.5 x 1.5 inci (kira-kira) |
| Item Beurat | 2.12 ons (kira-kira) |
Garansi sareng Rojongan
Fosmon products are designed for reliability and performance. For warranty information or technical support, please contact Fosmon customer service.
You can typically find contact details on the official Fosmon website or through your purchase platform. Please have your model number (C-10681) and purchase date available when contacting support.
