1. Produk Langkungview
GORILLA Clear Grip Contact Adhesive is a flexible, fast-setting, crystal clear adhesive designed to create a strong, permanent bond. This adhesive is paintable and waterproof, making it suitable for both indoor and outdoor projects. It bonds a variety of materials including metal, glass, fabric, wood, ceramic, leather, paper, and plastic.
Gambar 1: Hareupeun view of the Gorilla Clear Grip Contact Adhesive packaging, highlighting its crystal clear, waterproof, and fast-holding properties.
2. Émbaran Kasalametan
DANGER: VAPOR HARMFUL. FLAMMABLE. IRRITANT.
Read all cautions on the back of the tube before use. Use only in a well-ventilated area. Do not swallow. Do not get in eyes. Do not get on skin or clothing. Keep out of reach of children and animals.
First Aid Treatment:
- Upami ditelek: Call a poison control center or doctor immediately. Do not induce vomiting.
- Upami dina panon: Rinse with water for 15 minutes. If on skin, rinse well with water.
- Lamun kaseuseup: Move person into fresh air. For medical emergencies, call 800-420-7186.
WARNING: This product contains a chemical known to the State of California to cause birth defects and reproductive harm.
Gambar 2: Tukangeun view of the Gorilla Clear Grip Contact Adhesive packaging, detailing safety warnings, first aid, and application instructions.
3. Setup jeung Persiapan
- Ensure all surfaces to be bonded are clean and free of dirt, grease, and oil.
- For optimal performance, use the adhesive between 50°F and 90°F (10°C and 32°C).
4. Parentah Operasi
Léngkah-léngkah Aplikasi:
- Apply adhesive to each surface that will be bonded.
- For maximum bond strength, allow approximately two minutes for the adhesive to partially dry before joining the surfaces. This allows for a 'fast grab' that holds in seconds.
- Press the surfaces firmly together.
Waktos Cure:
Allow a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and when used on non-porous surfaces.
Image 3: A visual representation of Gorilla Clear Grip, emphasizing its permanent bond, crystal clear finish, fast grab, 100% waterproof nature, no-run formula, paintability, and flexibility.
5. Maintenance and Cleanup
Panyimpenan:
After each use, wipe the nozzle with a dry cloth and tightly replace the cap. Store the adhesive in a cool, dry location. To facilitate easier re-opening, apply a thin coat of petroleum jelly to the threads before replacing the cap.
Bersihkeun:
- Uncured Adhesive: Wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus-based solvents according to the manufacturer's instructions.
- Cured Adhesive: Cured adhesive may be removed by scraping from the surface.
Kabisa cet:
The adhesive is paintable once fully cured. It can be painted with water and oil-based paints, including spray paint.
Note: Not recommended for use on polystyrene, polypropylene, or polyethylene products. Do not use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces.
Gambar 4: Ti payun caket view of the Gorilla Clear Grip Contact Adhesive tube, showing branding and key features.
Image 5: Close-up back view of the Gorilla Clear Grip Contact Adhesive tube, displaying detailed safety warnings and usage instructions.
6. Cara ngungkulan
If the adhesive does not bond effectively, consider the following:
- Ensure surfaces were clean and dry before application.
- Verify that the adhesive was applied within the recommended temperature range (50°F to 90°F).
- Confirm that sufficient pressure was applied to the bonded surfaces.
- Allow adequate cure time (minimum 24 hours) for full bond strength, especially on non-porous surfaces or in cooler temperatures.
For further assistance, refer to the manufacturer's contact information.
7. Spésifikasi
| Fitur | Rincian |
|---|---|
| merek | GORILA |
| Nomer modél | 8040002 |
| Wangun Item | Liquid (Spray is incorrect, based on images it's a tube/gel) |
| Fitur husus | Fast Drying, Strong |
| Warna | Jelas |
| Jilid barang | 3 Ons Cairan (88 mL) |
| Viskositas | Viskositas tinggi |
| Waktos Cure pinuh | 24 Jam |
| Tingkat Résistansi Cai | Tahan cai |
| UPC | 052427000316 |
| Item Beurat | 1.76 pon |
| Dimensi produk | 11.2 x 3.75 x 8 inci (bungkus) |
| Mangpaat husus | Craft, Flooring, Painting, Repair, Tile Repair, Wall Art, Woodworking |
8. Garansi jeung Rojongan
Specific warranty information for GORILLA Clear Grip Contact Adhesive is not provided in the product details. For product support, inquiries, or to view additional information, please visit the official Gorilla Glue websitus:
You may also contact Gorilla Glue directly at 800-966-3458.
