DIGOO PPT1

Buku Panduan Pangguna Kalung Latihan Anjing Jarak Jauh Anti Cai DIGOO PPT1 anu Bisa Dicas Ulang

Modél: PPT1

1. Bubuka

Thank you for choosing the DIGOO PPT1 Remote Dog Training Collar. This manual provides detailed instructions for the safe and effective use of your training system. Please read this manual thoroughly before operating the device to ensure proper function and to maximize training effectiveness for your dog. This system is designed to assist in training dogs and correcting undesirable behaviors through beep, vibration, and static stimulation modes.

DIGOO PPT1 Remote Dog Training Collar with remote transmitter and receiver collar

Image: The DIGOO PPT1 remote dog training collar system, showing the handheld remote transmitter and the receiver collar.

2. Eusi Paket

Pastikeun yén sadaya item anu didaptarkeun di handap kalebet kana pakét anjeun:

  • 1 x DIGOO DG-PPT1 Remote Transmitter
  • 1 x DIGOO DG-PPT1 Waterproof Receiver Collar
  • 4 x DIGOO DG-PPT1 Contact Screws (two sizes)
  • 1 x DIGOO DG-PPT1 USB Charge Cable (Y-splitter)
  • 1 x DIGOO DG-PPT1 Test Light
  • 1 x Manual Pamaké (dokumén ieu)

3. Produk Langkungview

3.1 Remote Transmitter

Diagram of DIGOO PPT1 Remote Transmitter with labeled buttons and display

Image: Detailed diagram of the remote transmitter, highlighting its components such as the LCD screen, antenna, LED light, indicator, up/down buttons for vibration/shock, vibration button, shock button, LED light button, channel switch button, light/sound button, and charging port.

  • anteneu: Pikeun pangiriman sinyal.
  • Lampu LED: Indicates operation and battery status.
  • Indikator: Shows current mode and level.
  • Layar LCD: Blue backlit display for day and night visibility, showing channel, mode, level, and battery status.
  • Tombol Naék / Turun: Adjust vibration and static stimulation levels (0-100).
  • Tombol Geter: Activates vibration mode.
  • Tombol Shock: Activates static stimulation mode.
  • Tombol Lampu LED: Activates the receiver's LED light.
  • Channel Switch Button (1-2-3): Selects the receiver collar to control (up to 3 collars).
  • Light/Sound Button: Activates beep sound mode.
  • Ngecas liang: Port ngecas USB.

3.2 Receiver Collar

  • Titik Kontak: Nepikeun stimulasi statik.
  • Tombol Daya: Ngahurungkeun / mareuman panarima.
  • Port ngecas: Port ngecas USB.
  • Lampu Indikator: Shows power and operational status.
  • Tali adjustable: Fits neck sizes from 11.8 inches (30cm) to 23.6 inches (60cm).
  • Desain waterproof: Allows use in wet conditions, including swimming.

4. Setélan

4.1 Ngecas Alat

Both the remote transmitter and receiver collar use rechargeable lithium-ion batteries. Use the provided Y-splitter USB charging cable to charge both devices simultaneously.

  1. Connect the Y-splitter USB cable to a standard USB power adapter (not included) or a computer USB port.
  2. Plug one micro-USB end into the charging port of the remote transmitter.
  3. Plug the other micro-USB end into the charging port of the receiver collar.
  4. Charge for approximately 3-4 hours until fully charged. The indicator lights will change to indicate full charge (refer to device indicators for specific behavior).

Note: A full charge typically provides up to 2 weeks of use, depending on frequency.

4.2 Hurungkeun / Pareum

  • Pamancar jauh: Press any button to activate. It will automatically enter standby mode after 5 minutes of inactivity to save power.
  • Kerah panarima:
    • Pikeun Ngahurungkeun: Press and hold the power button on the receiver until the working indicator light illuminates.
    • Pareuman: When the working indicator is not shining, press and hold the power button for a few seconds until the working indicator flashes twice, then release.

4.3 Pairing the Remote and Receiver

The remote and receiver are typically pre-paired from the factory. If re-pairing is needed or if you are adding additional collars:

  1. Ensure both devices are fully charged and turned off.
  2. Turn on the remote transmitter. Select the desired channel (1, 2, or 3) using the channel switch button.
  3. Press and hold the power button on the receiver collar until the indicator light flashes rapidly.
  4. Within 10 seconds, press the "Shock" or "Vibration" button on the remote transmitter.
  5. If pairing is successful, the receiver's indicator light will stop flashing and remain solid for a moment, then flash slowly.
  6. To pair additional collars, repeat the process, selecting a different channel on the remote for each new collar.
Image showing one remote transmitter controlling three receiver collars

Image: Illustration demonstrating how one remote transmitter can be paired with and control up to three separate receiver collars, each on its own channel.

4.4 Nyocogkeun Kerah

Proper fit of the receiver collar is crucial for effective and safe operation. The contact points must have direct contact with your dog's skin.

Diagram showing adjustable collar strap and two sizes of contact screws for the receiver

Image: Visual guide for adjusting the collar strap and selecting the appropriate contact screw length (6mm or 14mm) to ensure proper fit for dogs of various sizes, from 10 to 150 lbs.

  1. Pastikeun kerah dipareuman.
  2. Select the appropriate length of contact screws (6mm or 14mm) based on your dog's coat length. Longer screws are for thicker coats.
  3. Attach the chosen contact screws securely to the receiver.
  4. Place the receiver collar around your dog's neck, ensuring the contact points are positioned underneath the neck.
  5. Adjust the strap so it is snug but not too tight. You should be able to fit two fingers comfortably between the strap and your dog's neck.
  6. The collar should not be worn for more than 12 hours a day to prevent skin irritation. Regularly check your dog's neck for any signs of irritation.

5. Parentah Operasi

The DIGOO PPT1 offers three training modes: Beep, Vibration, and Static Stimulation.

Diagram illustrating the three training modes: Beep, Vibration, and Static Shock

Image: Visual representation of the three training modes: Beep (default level 0, not adjustable), Vibration (levels 1-100), and Static Shock (levels 1-100). A note advises to start with level 1 and gradually increase intensity.

5.1 Beep Mode

  • Pencét éta Light/Sound Button dina rémot.
  • The receiver will emit an audible beep sound.
  • This mode is ideal for giving warnings or attracting your dog's attention. The beep level is fixed and not adjustable.

5.2 Modeu Geter

  • Pencét éta Tombol Geter dina rémot.
  • Ngagunakeun éta Tombol Naék / Turun to select a vibration level from 0 to 100.
  • The receiver will vibrate according to the selected intensity.
  • Start with the lowest effective level and gradually increase if necessary.

5.3 Static Stimulation Mode

  • Pencét éta Tombol Shock dina rémot.
  • Ngagunakeun éta Tombol Naék / Turun to select a static stimulation level from 0 to 100.
  • The receiver will deliver a static pulse according to the selected intensity.
  • Always start with the lowest effective level (level 1) and increase gradually. Use the included test light to verify static function.
  • This mode should be used cautiously and only when necessary for correcting serious undesirable behaviors.

5.4 Jarak Jauh Control

The remote control has an effective range of up to 330 yards (approximately 300 meters) in open areas. Environmental factors and obstacles can affect this range.

Image demonstrating the remote control range of up to 330 yards in an open field

Image: Visual representation of the remote control's effective range, showing a dog being trained in an open field up to 330 yards away, and a smaller range of 165 yards in areas with barriers.

6. Latihan Tips

  • Konsistensi mangrupikeun konci: Anggo kalung ieu sacara konsisten pikeun paripolah khusus anu anjeun hoyong koreksi.
  • Penguatan positif: Always pair corrections with positive reinforcement when your dog performs the desired action.
  • Mimitian Handap: Begin with the lowest effective stimulation level and only increase if your dog does not respond.
  • Sesi Singkat: Keep training sessions short and positive to maintain your dog's engagement.
  • pangawasan: Ulah pernah ngantepkeun kalung anjing dina kaayaan anu teu diawasi salami waktos anu lami.
  • Not for Punishment: This device is a training aid, not a punishment tool. Use it responsibly and humanely.

7. Pangropéa

7.1 beberesih

  • Wipe the remote and receiver with a damp lawon. Ulah make bahan kimia kasar.
  • Regularly clean the contact points on the receiver to ensure proper function and prevent skin irritation.

7.2 Waterproofing

The receiver collar is designed to be waterproof, allowing your dog to swim or be in rainy conditions while wearing it. The remote transmitter is not waterproof and should be kept dry.

Image showing a dog swimming with the waterproof receiver collar and a close-up of the rubber cover for waterproofing

Image: A golden retriever splashing in water, wearing the DIGOO PPT1 waterproof receiver collar. A close-up inset shows the special rubber cover on the receiver, ensuring its waterproof capability even during swimming.

7.3 Perawatan Batré

  • Ngeusi batre alat sapinuhna sateuacan dianggo heula.
  • Recharge when the battery indicator shows low power.
  • If storing for extended periods, charge the devices every few months to maintain battery health.

8. Spésifikasi

FiturSpésifikasi
tampilanBlue Backlit LCD
Modeu GawéBeep, Vibration, Static Stimulation
Tingkat Geter0-100 tingkatan
Static Stimulation Levels0-100 tingkatan
Minimum Collar Size11.8 inci (30 cm)
Maximum Collar Size23.6 inci (60 cm)
Waktu Ngecas3-4 jam
Waktos GawéUp to 2 weeks (with typical use)
Sumber DayaKabel Muatan USB
Rentang Control JauhUp to 330 yards (open area)
Panarima Waterproof PeunteunWaterproof (suitable for swimming)
Cocog Anjing Beurat10 lbs - 150 lbs
Dimensi produk19 x 14 x 5.99 cm
Beurat produk260 g
Nomer modélDIGOOWolifui147

9. Cara ngungkulan

MasalahMungkin Cukang lantarananaSolusi
Collar not working / No responseLow battery; Not turned on; Not paired; Out of range.Charge both devices; Turn on both devices; Re-pair the remote and receiver; Move closer to the receiver.
Stimulasi statis teu karasaCollar not fitted properly; Contact points too short; Low battery; Level too low.Adjust collar fit; Use longer contact screws; Charge receiver; Increase stimulation level (gradually). Use test light to verify function.
Remote LCD screen is dim or blankLow battery; Auto-standby mode.Charge the remote; Press any button to wake it up.
Shortened remote rangeEnvironmental interference; Obstacles; Low battery.Move to an open area; Charge both devices.

10. Garansi jeung Rojongan

DIGOO offers a 1-year worry-free return/refund policy for the dog training collar. For any problems or questions, please contact customer support at support@mydigoo.com. Responses are typically provided within 24 hours.

For further details, please visit the manufacturer's official websitus.