BLS T01L LED Closet Light User Manual

1. Bubuka

The BLS T01L LED Closet Light is a versatile, motion-sensing lighting solution designed for various indoor applications. It features 20 super bright LEDs, offering 180 lumens of soft white light. This light can be powered by 3 AA batteries for wireless operation or via a 5V USB DC input for constant lighting. Its adjustable light beam and motion sensor provide customizable illumination and detection.

Image 1.1: The BLS T01L LED Closet Light, a 14-inch white light bar with a central motion sensor.

2. Naon dina Box

Mangga pariksa yén sadaya komponén aya nalika muka bungkusan:

• 1 x BLS Under Cabinet Light (Model T01L)
• 1 x Kabel DC
• 2 x 3M pita napel
• 1 x Manual Instruksi (Dokumén ieu)

Image 2.1: The BLS T01L LED Closet Light shown with its packaging, DC cable, and mounting accessories.

3. Spésifikasi

4. Setup jeung Instalasi

Follow these steps to set up your BLS T01L LED Closet Light:

4.1. Powering Alat

The light can be powered by 3 AA batteries or a 5V USB DC input.

1. Pamasangan batré:
   • Locate the battery compartment on the back of the light.
   • Gently push to open the center part of the battery compartment cover.
   • Insert three AA batteries (not included). One battery slides into the hole on the left, the second into the hole on the right, and the third goes into the open center between the first two. Ensure correct polarity (+/-).
   • Tutup panutup kompartemen batré aman.
2. USB DC Power:
   • Connect the provided DC cable to the light's DC input port.
   • Plug the other end of the DC cable into a 5V USB power source (e.g., USB wall adapter, power bank).
   • Catetan: If using USB DC power, it is recommended to remove the AA batteries to prevent potential issues or unnecessary battery drain.

Image 4.1: Diagram illustrating the 14-inch length of the light and its power options: 3 AA batteries or USB cable.

4.2. Pasang Lampu

The BLS T01L offers multiple installation options:

• Pamasangan napel: Peel the backing from the 3M adhesive tapes and firmly press the light onto a clean, dry surface.
• Pamasangan screw: Use the provided screws to secure the light to the desired surface. This method offers a more permanent installation.

The light can be mounted either horizontally or vertically, depending on your application needs.

Image 4.2: Diagram showing horizontal and vertical installation options using screws or 3M adhesive stickers.

5. Parentah Operasi

5.1. Pilihan Modeu

The light features a slide switch with three modes:

• Mode otomatis: The light will automatically turn on when motion is detected within 10 feet in a dark environment. It will remain on for 20 seconds after motion ceases. The built-in light sensor ensures it only activates when ambient light is low (e.g., at night).
• Mode ON: Cahya bakal tetep hurung, henteu paduli gerak atanapi kaayaan cahaya ambient.
• Mode OFF: Lampu bakal tetep pareum.

5.2. Adjusting Motion Sensor Sensitivity

The motion sensor can be adjusted to modify its detection sensitivity and range:

• The motion sensor module is designed to swivel. Gently rotate the sensor to adjust its detection angle.
• This allows you to fine-tune the area where motion is detected, preventing unwanted activations.

Image 5.1: Illustration of how to adjust the motion sensor to control sensitivity.

5.3. Adjusting Light Beam Angle

The entire light fixture can be adjusted to direct the light beam as desired:

• The light is mounted on a bracket that allows it to swivel.
• Gently pivot the light to achieve the desired illumination angle (e.g., 90°, 120°, 180°).

Gambar 5.2: Examples of adjustable light beam angles (90°, 120°, 180°) for optimal illumination.

6. Pangropéa

6.1. Ngagantian batré

When the light output diminishes or the motion sensor becomes less responsive, it may be time to replace the batteries.

1. Open the battery compartment cover as described in Section 4.1.
2. Leupaskeun batré AA heubeul.
3. Insert three new AA batteries, ensuring correct polarity.
4. Tutup panutup kompartemen batré.

Catetan: For optimal performance and to avoid frequent battery changes, consider using high-quality alkaline or rechargeable AA batteries. If using the USB DC power option, remove the AA batteries.

6.2. beberesih

To maintain the appearance and functionality of your light:

• Ensure the light is in the OFF position or disconnected from power before cleaning.
• Ngusap beungeut ku kaen lemes, garing.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electronic components.

7. Cara ngungkulan

If you encounter issues with your BLS T01L LED Closet Light, refer to the following common problems and solutions:

8. Émbaran jaminan

The BLS T01L LED Closet Light comes with an extended warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or contact BLS customer support.

9. Rojongan Palanggan

If you have any questions, require technical assistance, or need further support, please contact BLS customer service through the following channels:

• Surélék: Refer to your product packaging or the official BLS websitus pikeun email kontak panganyarna.
• Websitus: Visit the official BLS websitus pikeun FAQs jeung sumber rojongan.
• Toko Amazon: Anjeun oge bisa nganjang ka BLS Store on Amazon kanggo inpormasi produk sareng pilihan kontak anu ngajual.