VonHaus 600W Corded 2-in-1 Stick Vacuum Cleaner Instruction Manual

1. Émbaran Kasalametan penting

Please read all instructions carefully before using your VonHaus 600W Corded 2-in-1 Stick Vacuum Cleaner. Retain this manual for future reference.

• Always ensure the appliance is unplugged from the power supply before assembling, disassembling, or cleaning.
• Do not use the appliance on wet surfaces or to pick up liquids.
• Jauhkeun rambut, pakean longgar, ramo, sareng sadaya bagian awak tina bukaan sareng bagian anu obah.
• Ulah nyokot naon bae anu kaduruk atawa ngaroko, kayaning roko, korek api, atawa lebu panas.
• Anggo ngan sakumaha anu dijelaskeun dina manual ieu. Paké ngan kantétan dianjurkeun produsén urang.
• Ulah make tanpa cangkir lebu jeung/atawa saringan di tempat.
• Upami kabel suplai rusak, éta kedah digentos ku produsén, agén palayanan, atanapi jalma anu mumpuni anu sami pikeun ngahindarkeun bahaya.

2. Eusi Paket

Pariksa yén sadaya komponén aya sareng dina kaayaan anu saé:

• Unit vakum utama
• cecekelan Extendable
• Sikat Sikat Lantai
• Alat celah
• Sikat Gagantel
• Filter HEPA (dipasang sateuacana)
• Saringan Spons (tos dipasang sateuacanna)

Figure 2.1: Included accessories for versatile cleaning.

3. Setup jeung Majelis

Your VonHaus vacuum can be assembled in two configurations: upright stick vacuum or handheld vacuum.

3.1 Upright Stick Vacuum Assembly

1. Pasang gagang: Insert the extendable handle into the main vacuum unit until it clicks securely into place.
2. Attach the Floor Brush Head: Connect the floor brush head to the main vacuum unit. Ensure it is firmly attached.
3. Sambungan Daya: Colokkeun kabel listrik kana stop kontak listrik anu cocog.

Figure 3.1: The VonHaus 2-in-1 Stick Vacuum Cleaner in its two primary configurations.

3.2 Handheld Vacuum Assembly

1. Detach Handle and Floor Head: If assembled as an upright vacuum, press the release buttons to detach the extendable handle and the floor brush head from the main unit.
2. Gantelkeun Asesoris: Select the desired accessory (crevice tool or brush attachment) and firmly attach it to the main vacuum unit.
3. Sambungan Daya: Colokkeun kabel listrik kana stop kontak listrik anu cocog.

Figure 3.2: Handheld configuration for detailed cleaning tasks.

3.3 Pituduh Setelan Visual

For a visual demonstration of the assembly process, please refer to the video below:

4. Parentah Operasi

Once assembled and plugged in, your vacuum is ready for use.

1. Hurungkeun/Pareuman: Locate the power switch on the main unit and slide it to the 'On' position to start vacuuming. Slide to 'Off' to stop.
2. Mode tegak: Use the extendable handle and floor brush head for cleaning carpets, hard floors, and tiles. The lightweight design (approximately 0.01 ounces) allows for easy maneuverability.
3. Modeu Handheld: For smaller messes, upholstery, car interiors, or hard-to-reach areas, use the main unit with the appropriate attachment.
4. Ngagunakeun kantétan: The crevice tool is ideal for tight spaces and corners. The brush attachment is suitable for delicate surfaces and upholstery.

Figure 4.1: Effective cleaning of hard floors using the upright stick vacuum.

5. Pangropéa

Pangropéa rutin ngajamin kinerja anu optimal sareng manjangkeun umur vacuum cleaner anjeun.

5.1 Ngosongkeun Piala Debu

Empty the dust cup regularly, ideally after each use, to maintain strong suction power.

1. Copotkeun Cangkir Lebu: Hold the main vacuum unit and press the dust cup release button. Gently pull the dust cup away from the main unit.
2. Remove Cyclone Separator: Over a waste bin, gently pull out the cyclone separator from the dust cup.
3. Eusi kosong: Tip the dust cup to empty all collected debris into the waste bin.
4. Pasang deui: Reinsert the cyclone separator, ensuring it aligns correctly. Reattach the dust cup to the main unit until it clicks securely.

Figure 5.1: The 1.3L dust tank and HEPA sponge filtration system.

5.2 Ngabersihan Filter HEPA

The washable HEPA filtration system helps trap small particles. Clean the filter periodically.

1. Hapus saringan: After detaching the dust cup, carefully remove the HEPA filter.
2. Shake Off Debris: Gently shake the filter over a waste bin to remove loose dirt and debris.
3. Saringan cuci: Rinse the filter under running water until clean. Do not use detergents or hot water.
4. Garing lengkep: Allow the filter to air dry completely in a well-ventilated area before reinserting it. Ensure it is completely dry to prevent mold or damage.
5. Lebetkeun deui Filter: Place the dry filter back into the vacuum, ensuring it is securely sealed.

5.3 Visual Maintenance Guide

For a visual demonstration of emptying the dust cup and washing the filter, please refer to the video below:

6. Cara ngungkulan

If you encounter issues with your vacuum, refer to the following common troubleshooting steps:

• Henteu aya kakuatan:
  • Pastikeun kabel listrik dicolokkeun sacara aman kana stop kontak anu tiasa dianggo.
  • Check the power switch is in the 'On' position.
• Kaleungitan nyeuseup:
  • Kosongkeun cangkir lebu.
  • Clean or replace the HEPA and sponge filters.
  • Check for blockages in the nozzle, hose, or extension tube.
• Noise anu teu biasa:
  • Check for any foreign objects caught in the floor brush head or main unit.
  • Ensure all parts are correctly assembled and securely fastened.

If problems persist after attempting these steps, please contact VonHaus customer support.

7. Spésifikasi

8. Garansi jeung Rojongan

For warranty information, product registration, or technical support, please refer to the documentation included with your purchase or visit the official VonHaus websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.

For additional assistance, you may contact VonHaus customer service directly.