1. Produk Langkungview
The Unocho 24V 5A Automatic Smart Battery Charger is designed for efficient and safe charging of 24V AGM, GEL, SLA, and other lead-acid batteries. It features a 3-pin XLR connector, an I/O switch, and multiple safety protections, making it suitable for various applications including wheelchairs, mobility scooters, cars, and boats.
Fitur konci:
- Ngecas Gancang sareng Éfisién: Provides 5A constant current output, compatible with 7Ah–120Ah lead-acid batteries, and supports AC100-240V input for global use.
- Aman sareng Terpercaya: Designed to UL/CE/CCC safety standards with an intelligent 4-step charging program (Initialization, Bulk Charge, Absorption, Float Mode) and ultra-low standby power consumption.
- Desain Unik: Features a high-density aluminum casing, I/O switch, 4-speed fan for heat dissipation, IP65 waterproof rating, and LED indicators for power and charging progress.
- Sababaraha panyalindungan kaamanan: Includes protections against short circuit, overvoltage, overcurrent, overload, and reverse polarity.
- Wide Aplikasi: Suitable for SLA / VRLA / Flooded (Wet) / Calcium type deep cycle / GEL / AGM lead-acid batteries used in wheelchairs, electric carts, vehicles, motorcycles, and trucks.
2. Parentah Setup
Follow these steps to properly set up your Unocho 24V 5A Automatic Smart Battery Charger:
- Buka bungkus carjer: Carefully remove the charger and all accessories from the packaging. Inspect for any visible damage.
- Pastikeun ventilasi: Place the charger in a well-ventilated area, away from flammable or explosive materials. Ensure adequate space around the charger for heat dissipation.
- Nyambung ka Batré: Connect the 3-pin XLR output connector of the charger to the corresponding port on your 24V battery or device. Ensure a secure connection.
Image 2.1: Diagram illustrating the 3-pin XLR connector, showing Pin-1 as positive, Pin-2 as negative, and Pin-3 as empty. This ensures correct polarity connection. - Nyambungkeun ka stop kontak: Plug the AC input cable into the charger's AC inlet, then plug the other end into a standard AC100-240V power outlet.
Image 2.2: The charger's AC input interface and the standard power plug for connecting to a wall outlet. - Daya Hurung: Flip the I/O switch on the charger to the "ON" position. The red power indicator light should illuminate.
penting: Always connect the charger to the battery first before plugging it into the AC power outlet. Disconnect from AC power before disconnecting from the battery.
3. Parentah Operasi
The Unocho Smart Battery Charger features an intelligent 4-stage charging process and clear LED indicators to monitor charging status.
Prosés ngecas:
- Initialization: The charger analyzes the battery's condition.
- Beban ageung: Delivers maximum current to rapidly charge the battery up to approximately 80% capacity.
- Mode nyerep: Biaya dina hiji decreasing current to bring the battery to 100% capacity.
- Modeu ngambang: Ngajaga batré tetep pinuh kalayan voltase anu alit sareng konstantage, preventing overcharging and extending battery life.
Indikator LED:
- LED Beureum (Kakuatan): Indicates the charger is connected to AC power and is turned on.
- Green LEDs (Charging Progress): Four green LEDs indicate the battery capacity from 25% to 100% during charging.
Image 3.1: Close-up of the charger's LED display, showing the red power indicator and the four green lights that illuminate sequentially to show charging progress. - All Green LEDs Flashing: Indicates battery polarity is reversed or the output is shorted. Disconnect immediately and check connections.
- All Green LEDs Off (Red LED On): No battery is connected, or the battery is severely discharged.
- One Green LED On (and other 3 Off, Red LED On): The charger has entered the recovery desulfating process for deeply discharged batteries.
4. Pangropéa
- beberesih: Disconnect the charger from both the AC outlet and the battery before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use harsh chemicals or abrasive cleaners.
- Panyimpenan: Simpen carjer dina tempat anu tiis sareng garing upami henteu dianggo. Hindarkeun suhu anu ekstrim sareng sinar panonpoé langsung.
- Pamariksaan kabel: Regularly inspect the AC power cord and the 3-pin XLR output cable for any signs of damage, fraying, or exposed wires. Replace if damaged.
- Ventilasi: Ensure the charger's fan and vents are free from dust and debris to maintain optimal cooling performance. The internal fan automatically adjusts speed based on power load to reduce noise and heat.
5. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Charger not turning on (No red power LED) |
|
|
| Green LEDs flashing (not charging) |
|
|
| Charger not charging (Red LED on, all Green LEDs off) |
|
|
| Charger overheats |
|
|
6. Spésifikasi
| Fitur | Rincian |
|---|---|
| merek | Unocho |
| Nomer modél | 3-pin XLR (EPA150-24) |
| Masukan Voltage | AC 100-240V, 50/60Hz |
| Kaluaran Voltage | 24 Volt (DC) |
| Kaluaran Ayeuna | 5 Amps |
| Jenis Batré cocog | SLA / VRLA / Flooded (Wet) / Calcium type deep cycle / GEL / AGM lead-acid batteries |
| Rentang Kamampuh Batre | 7Ah - 120Ah |
| Pengisian Stages | 4-stage (Initialization, Bulk Charge, Absorption, Float) |
| Tipe Panyambung | 3-pin XLR Jalu |
| Protections Kasalametan | Sirkuit pondok, overvoltage, overcurrent, overload, reverse polarity |
| Peunteun waterproof | IP65 |
| Niiskeun | Internal fan with 4-speed gears |
| Dimensi produk | 2.56 x 6.42 x 3.74 inci |
| Item Beurat | 1.41 ons |
7. Garansi jeung Rojongan
The Unocho 24V battery trickle charger comes with worry-free return and exchange services. For any questions or issues, please contact customer support. They offer 24-hour customer support to assist with any concerns regarding your Unocho battery charger.
For further assistance, please refer to the official Unocho store or contact their customer service directly.
