Parentah Kasalametan penting
Read all instructions before using this fan. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.
- Sok cabut kipas angin sateuacan beberesih atanapi ngalayanan.
- Entong nganggo kipas nganggo kabel atanapi colokan anu rusak.
- Ulah ngajalankeun ari handapeun karpét. Ulah nutupan ari ku karpet lémparan, runners, atawa panutup sarupa. Atur tali jauh ti wewengkon lalulintas sarta dimana eta moal tripped leuwih.
- kipas ieu dimaksudkeun pikeun pamakéan indoor wungkul. Ulah make di luar.
- Do not immerse fan in water or other liquids.
- Jauhkeun barudak sareng piaraan tina kipas nalika operasi.
- Ulah ngasupkeun ramo atawa barang asing kana liang ventilasi atawa knalpot.
Produk Leuwihview
The Utilitech Pro 20-inch High Velocity Fan is designed to provide powerful air circulation for various indoor environments. Its robust construction and high-efficiency motor ensure effective cooling and ventilation.
Image: Utilitech Pro 20-inch High Velocity Fan, showing its sturdy metal frame, large fan blades, and protective grille.
fitur konci ngawengku:
- 20-inch diameter for wide air distribution.
- 3-speed settings for customized airflow.
- 360-degree vertical tilt for versatile positioning.
- Convenient handle for easy portability.
- Durable plastic blades and metal housing.
Setup sareng Majelis
The Utilitech Pro 20-inch High Velocity Fan typically comes pre-assembled. Follow these steps for initial setup:
- Ngabongkar bungkusan: Kaluarkeun kipas tina bungkusna kalayan ati-ati. Simpen bungkusna kanggo panyimpenan atanapi transportasi ka hareup.
- panempatan: Teundeun kipas dina permukaan anu rata. Pastikeun aya rohangan anu nyukupan di sabudeureun kipas pikeun sirkulasi hawa anu leres sareng pikeun nyegah halangan asupan / kaluaran hawa.
- Sambungan Daya: Ensure the fan's power switch is in the "OFF" position. Plug the power cord into a standard 120V AC electrical outlet.
Catetan: Inspect the fan for any damage before first use. If any damage is observed, do not operate the fan and contact customer support.
Parentah Operasi
To operate your Utilitech Pro 20-inch High Velocity Fan:
- Daya Hurung: Locate the control knob or switch, usually on the back or side of the fan. Turn the knob to the desired speed setting.
- Setélan laju: Kipas ieu nawiskeun tilu setélan kecepatan:
- rendah: For gentle air movement.
- Sedeng: Pikeun sirkulasi hawa anu sedeng.
- luhur: Pikeun aliran hawa sareng pendinginan anu maksimal.
- Nyaluyukeun Dengdekkeun: The fan head can be tilted 360 degrees vertically. Loosen the adjustment knobs on either side of the fan frame, tilt the fan to the desired angle, and then tighten the knobs securely to lock it in place.
- Pareum listrik: To turn off the fan, turn the control knob or switch to the "OFF" position. Unplug the fan from the outlet when not in use for extended periods.
Pangropéa sareng Perawatan
Pangropéa rutin mastikeun kinerja anu optimal sareng manjangkeun umur kipas anjeun.
- beberesih:
- Sok cabut kipas angin sateuacan beberesih.
- Ngagunakeun lemes, damp lawon pikeun ngusap surfaces exterior kipas. Ulah make cleaners abrasive atawa pangleyur.
- To clean the fan blades, you may need to remove the front grille. Use a vacuum cleaner with a brush attachment or a soft cloth to remove dust from the blades and motor housing.
- Pastikeun sadaya bagian parantos garing sateuacan nyolokkeun kipas deui.
- Panyimpenan: Upami teu dianggo, simpen kipas di tempat anu tiis sareng garing. Disarankeun pikeun nyimpenna dina bungkus aslina pikeun ngajaga tina lebu sareng karusakan.
- Lubrication: This fan is designed with permanently lubricated bearings and does not require additional lubrication.
Pamérésan masalah
If you experience issues with your fan, consult the following troubleshooting guide:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Kipas angin teu hurung. | No power to the outlet; Fan not plugged in; Power switch is OFF; Motor overheating. | Check the circuit breaker; Ensure fan is securely plugged in; Turn the power switch to ON; Unplug fan and allow to cool for 30 minutes before restarting. |
| Ngurangan aliran hawa. | Dust accumulation on blades or grille; Obstruction near fan. | Clean fan blades and grille (refer to Maintenance section); Remove any objects blocking air intake or output. |
| Kipas nyieun sora anu teu biasa. | Loose parts; Fan not on a level surface; Debris inside the fan. | Check for loose screws or components; Place fan on a stable, level surface; Unplug fan and inspect for debris, carefully remove if found. |
Upami masalahna tetep saatos nyobian solusi ieu, hubungi dukungan palanggan.
spésifikasi
| merek | Utilitech |
| Nomer modél | SFD1-500B |
| Tipe kipas | Floor Fan, High Velocity |
| diaméterna | 20 inci |
| Jumlah Speeds | 3 |
| Nangtung Dengdekkeun | 360 darajat |
| Bahan Sabeulah | palastik |
| Pamakéan jero rohangan / outdoor | jero rohangan |
| Item Beurat | 11 pon |
| Métode kontrol | Toél (Note: Typically a rotary switch for speed control) |
Garansi sareng Rojongan
While specific warranty details are not provided, most Utilitech products come with a limited manufacturer's warranty covering defects in materials and workmanship. Please refer to the product packaging or the retailer's website for precise warranty terms and conditions.
For technical support, replacement parts, or warranty claims, please contact Utilitech customer service. Keep your purchase receipt and model number (SFD1-500B) readily available when contacting support.
Contact information (example, as not provided):
- Websitus: www.utilitech.com (Placeholder link)
- Telepon: 1-800-XXX-XXXX (Placeholder number)
