Bubuka
Thank you for choosing the Utilitech Pro 20-inch 3-Speed Oscillation High Velocity Fan. This manual provides important information regarding the safe operation, assembly, maintenance, and troubleshooting of your new fan. Please read this manual thoroughly before using the product and retain it for future reference.
This high-velocity fan is designed to provide powerful air circulation for various indoor and outdoor environments, featuring three speed settings and an oscillation function for widespread cooling.
Parentah Kasalametan penting
Nalika nganggo alat-alat listrik, pancegahan dasar kedah diturutan pikeun ngirangan résiko kahuruan, kejutan listrik, sareng tatu pikeun jalma, kalebet ieu:
- Baca sadaya pitunjuk sateuacan nganggo kipas ieu.
- This fan is for indoor and outdoor use. Do not expose to rain or use in wet locations.
- Entong nganggo kipas nganggo kabel atanapi colokan anu rusak. Piceun kipas atawa balik deui ka fasilitas layanan otorisasi pikeun ujian jeung / atawa perbaikan.
- Ulah ngajalankeun ari handapeun karpét. Ulah nutupan ari ku karpet lémparan, runners, atawa coverings sarupa. Ulah jalur tali handapeun parabot atawa parabot. Atur tali jauh ti wewengkon lalulintas sarta dimana eta moal tripped leuwih.
- To disconnect fan, turn controls to OFF, then remove plug from outlet.
- Ulah nyelapkeun atawa ngidinan ramo atawa objék asing asup kana sagala ventilasi atawa bukaan knalpot sabab bisa ngabalukarkeun shock listrik atawa seuneu, atawa ngaruksak kipas.
- Entong meungpeuk asupan udara atanapi knalpot sagala cara.
- Entong dianggo dina permukaan anu lemes, sapertos ranjang, dimana bukaan tiasa janten blok.
- Kipas ieu henteu dimaksad pikeun dianggo dina baseuh atanapi damp lokasi.
- Salawasna tempatkeun kipas dina permukaan anu rata sareng stabil supados henteu tibalik.
- Unplug the fan from the outlet when not in use, when moving from one location to another, and before cleaning.
Eusi pakét
Mangga parios eusi pakét pikeun mastikeun yén sadaya bagian aya sareng henteu ruksak:
- Fan Head Assembly (with motor and blades)
- Tiang Panyangga anu Bisa Disaluyukeun
- Dasar buleud
- Pemasangan Hardware (screws, washers, mur)
- Manual pangguna (dokumén ieu)
Image: The Utilitech Pro 20-inch High Velocity Fan, shown fully assembled. It features a large circular fan head with a protective grille, mounted on a tall, slender stand with a stable round base. The fan and stand are black.
Setup sareng Majelis
Follow these steps to assemble your Utilitech Pro High Velocity Fan:
- Pasangkeun Tiang Stand kana Dasar: Carefully align the bottom end of the adjustable stand pole with the opening in the center of the round base. Secure it using the provided screws and washers from underneath the base. Ensure it is tightened firmly for stability.
- Pasangkeun sirah kipas kana tihang penyangga: Locate the mounting bracket on the fan head assembly. Align this bracket with the top of the adjustable stand pole. Insert the necessary bolts and nuts to secure the fan head firmly to the pole. Ensure the fan head is stable and does not wobble.
- Saluyukeun Jangkungna (Opsional): If your stand pole has an adjustable height mechanism, loosen the locking knob or collar, extend or retract the pole to your desired height, and then securely tighten the knob/collar.
- Posisi: Place the assembled fan on a firm, level surface, away from curtains, drapes, or any objects that could obstruct airflow or be drawn into the fan blades.
- Colokkeun: Insert the power cord into a standard electrical outlet. Ensure the outlet voltage matches the fan's requirements (230V AC).
Parentah Operasi
Your Utilitech Pro High Velocity Fan is designed for simple operation:
- Hurungkeun/Pareuman: Locate the control knob or switch, typically on the back or side of the fan head. Turn the knob to the "OFF" position to ensure the fan is off before plugging it in. Once plugged in, turn the knob to select your desired speed setting.
- Setélan laju: Kipas ieu ngagaduhan 3 setélan kecepatan:
- rendah: Pikeun sirkulasi hawa anu lemes.
- Sedeng: Pikeun aliran hawa anu sedeng.
- luhur: For maximum air velocity and cooling.
- Fungsi Osilasi: To activate the oscillation (side-to-side sweeping motion), locate the oscillation knob or pin on the top or back of the fan motor housing. Push it down to engage oscillation. Pull it up to stop oscillation and direct airflow in a fixed direction.
- Penyesuaian Dengdekkeun: The fan head can be tilted up or down to direct airflow. Loosen the adjustment knobs on either side of the fan head, tilt the fan to the desired angle, and then securely tighten the knobs.
Pangropéa jeung beberesih
Regular cleaning will help maintain your fan's performance and extend its lifespan:
- Sok cabut kipas angin sateuacan ngabersihkeun atanapi ngalakukeun perawatan naon waé.
- Bersihan Luar: Ngagunakeun lemes, damp lawon pikeun ngusap surfaces exterior kipas. Ulah make cleaners abrasive atawa pangleyur, sabab bisa ngaruksak finish.
- Blade and Grille Cleaning: Dust and lint can accumulate on the fan blades and grilles, reducing airflow.
- For light dust, use a vacuum cleaner with a brush attachment to clean the grilles.
- For more thorough cleaning, you may need to remove the front grille. Refer to the diagrams (if available in a physical manual) or consult a qualified technician if you are unsure how to safely remove the grille. Once removed, wipe the blades and grilles with a damp lawon. Pastikeun sadaya bagian garing pisan sateuacan dipasang deui sareng dioperasikeun kipas.
- Panyimpenan: Lamun teu dipaké pikeun période nambahan, nyimpen kipas dina tiis, tempat garing, preferably dina bungkusan aslina, ngajaga tina lebu jeung karuksakan.
Pamérésan masalah
Upami kipas anjeun henteu jalan kalayan leres, mangga parios masalah umum ieu sateuacan ngahubungi dukungan:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Kipas angin teu hurung. | Not plugged in; Power outlet not working; Fan switch is off; Circuit breaker tripped. | Ensure fan is securely plugged into a working outlet; Check household circuit breaker; Turn fan switch to an ON position. |
| Aliran hawa lemah. | Fan speed set too low; Grilles or blades are dirty; Obstruction in front or back of fan. | Increase fan speed; Clean fan blades and grilles (see Maintenance section); Remove any obstructions. |
| Kipas angin ribut. | Fan not on a level surface; Loose parts; Debris inside fan. | Place fan on a flat, stable surface; Check for loose screws or components and tighten if necessary; Unplug and inspect for debris inside the grille. |
| Osilasi teu jalan. | Kenop/pin osilasi teu kasambung. | Ensure the oscillation knob/pin is pushed down to engage the function. |
Lamun masalah persists sanggeus nyobian solusi ieu, mangga ngahubungan rojongan customer.
spésifikasi
- model: SFSDE-500B3-A
- merek: Utilitech
- Tipe: Kipas Lantai Laju Luhur
- diaméterna: 20 inci
- Setélan laju: 3-Laju
- Fitur husus: Oscillation, High Velocity
- Sumber Daya: Kabel Listrik
- Voltage: 230 Volt (AC)
- Bahan sabeulah: palastik
- Beurat barang: Kurang leuwih 24.3 pon
- Pamakéan Indoor/Outdoor: Outdoor (as per product specifications, though typically high velocity fans are versatile)
- Pamakéan anu disarankeun: Sirkulasi hawa
Garansi sareng Rojongan
For information regarding warranty coverage, product registration, or technical support, please refer to the warranty card included with your purchase or visit the official Utilitech website. Please have your model number (SFSDE-500B3-A) and purchase date ready when contacting support.
For general inquiries or to find authorized service centers, please contact Utilitech customer service through their official channels.
