ABAC Pole Position 24 Litre Air Compressor User Manual

Bubuka

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ABAC Pole Position 24 Litre Air Compressor. Please read this manual thoroughly before operating the compressor and keep it for future reference.

The ABAC Pole Position 24 Litre Air Compressor is designed for various DIY and light professional tasks, featuring a 24-litre tank, 2 HP (1.5 kW) motor, 220 litres/minute air intake, and a maximum pressure of 10 bar.

Parentah Kasalametan

Always observe the following safety precautions to prevent personal injury or damage to the compressor:

• Pastikeun compressor disimpen dina permukaan anu stabil.
• Ulah beroperasi compressor dina baseuh atawa damp kaayaan.
• Wear appropriate personal protective equipment (PPE), such as eye protection and hearing protection.
• Before any maintenance or inspection, disconnect the compressor from the power supply and ensure the tank is fully depressurized.
• Ulah langsungkeun hawa anu dikomprés ka jalma atanapi sasatoan.
• Jauhkeun barudak sareng jalma anu henteu sah ti daérah operasi.
• Regularly check all connections and hoses for leaks or damage.

Komponén Langkungview

• Tangki hawa: Stores compressed air (24 litres capacity).
• Motor and Pump Assembly: Ngahasilkeun hawa anu dikomprés.
• Alat ukur tekanan: Display tank pressure and regulated outlet pressure.
• Regulator tekanan: Nyaluyukeun tekanan hawa kaluaran.
• Kopling Sambungan Gancang: For attaching air tools and hoses.
• Solokan Solokan: Located at the bottom of the tank for draining condensation.
• Roda sareng Gagang: Pikeun gampang transportasi unit.

Disetél

1. Ngabongkar sareng Inspeksi: Carefully remove the compressor from its packaging. Inspect for any visible damage that may have occurred during transit. Report any damage to the supplier immediately.
2. Majelis (upami diperyogikeun): Attach the wheels and handle using the provided hardware. Ensure all bolts are securely tightened.
3. Initial Oil Check: Before first use, verify the oil level in the pump. The compressor may be shipped without oil or with a minimal amount. Refer to the oil sight glass or dipstick. If necessary, fill with appropriate compressor oil (typically SAE 30 non-detergent) to the indicated level.
4. panempatan: Position the compressor on a firm, level surface in a well-ventilated area. Ensure there is adequate space around the unit for air circulation.
5. Sambungan listrik: Connect the compressor to a grounded electrical outlet with the correct voltage (230 Volts) and circuit protection. Avoid using extension cords if possible; if necessary, use a heavy-duty, grounded extension cord rated for the compressor's power requirements.

Parentah Operasi

1. Ngamimitian Compressor:
   • Pastikeun klep solokan di handapeun tanki ditutup.
   • Plug the compressor into the power outlet.
   • Flip the ON/OFF switch to the 'ON' position. The compressor will start to build pressure until it reaches its maximum cut-off pressure (10 bar).
2. Nyaluyukeun tekanan kaluaran:
   • Turn the pressure regulator knob clockwise to increase pressure and counter-clockwise to decrease pressure.
   • Monitor the regulated pressure gauge to set the desired working pressure for your air tool.
3. Alat Nyambungkeun Udara:
   • Attach your air hose to the quick connect coupler.
   • Connect your air tool to the other end of the hose.
4. Pareuman:
   • Flip the ON/OFF switch to the 'OFF' position.
   • Cabut compressor tina stop kontak listrik.
   • Depressurize any air remaining in the hose and tool.
5. Draining Kondensasi: After each use, or at least daily, open the drain valve at the bottom of the tank to release any accumulated moisture. This prevents rust and extends the tank's lifespan.

Pangropéa

Regular maintenance ensures optimal performance and longevity of your compressor.

• poean:
  • Solokan kondensasi tina tank hawa.
  • Check oil level (if applicable, for oil-lubricated models).
• Mingguan/Unggal 10 Jam Pamakéan:
  • Inspect air filter for dirt and debris. Clean or replace if necessary.
  • Pariksa heula bisi aya sora atawa geteran nu teu biasa.
• Bulanan/Unggal 50 Jam Pamakéan:
  • Inspect all fasteners for tightness.
  • Check safety valve operation (briefly pull the ring to ensure it releases air).
• Taunan/Unggal 200 Jam Pamakéan:
  • Change compressor oil (if applicable).
  • Inspect pressure switch and gauges for proper function.
• Panyimpenan: When storing the compressor for extended periods, ensure the tank is drained of all moisture and store in a dry, protected area.

Pamérésan masalah

If you encounter problems not listed here or if solutions do not resolve the issue, please contact ABAC customer support or a qualified service technician.

spésifikasi

Garansi sareng Rojongan

ABAC products are manufactured to high quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ABAC websitus.

For technical assistance, spare parts, or service inquiries, please contact your authorized ABAC dealer or customer support. When contacting support, please have your product model and serial number ready.

Anjeun tiasa manggihan inpo nu leuwih lengkep sareng wincik kontak dina ABAC Store on Amazon.