DS18 PRO-GM6 Loudspeaker Instruction Manual

1. Bubuka

Thank you for choosing the DS18 PRO-GM6 6.5-inch Midrange Loudspeaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

2. Émbaran Kasalametan

Always observe the following safety precautions when installing and operating your loudspeaker:

• Pegatkeun sambungan terminal batré négatip kandaraan urang sateuacan dimimitian sagala pagawean listrik pikeun nyegah sirkuit pondok.
• Ensure proper wiring and connections. Incorrect wiring can damage the speaker, amplampu, atawa sistem listrik kandaraan.
• Use appropriate gauge wiring for power and speaker connections.
• Mount the speaker securely to prevent movement during vehicle operation.
• Avoid installing speakers in locations that obstruct vehicle safety features (e.g., airbags).
• Do not operate the audio system at excessively high volumes for prolonged periods, as this can cause hearing damage.
• Taroskeun ka pamasangan profésional upami anjeun henteu yakin ngeunaan bagian mana waé tina prosés pamasangan.

3. Naon dina Box

• DS18 PRO-GM6 Loudspeaker (1 unit)
• Instruksi Manual

Note: Additional mounting hardware or speaker wire may be required and is not included.

4. Spésifikasi

Gambar: Hareupeun view of the DS18 PRO-GM6 loudspeaker with its main technical specifications highlighted.

5. Setup jeung Instalasi

Proper installation is crucial for the performance and longevity of your DS18 PRO-GM6 loudspeaker. This section provides general guidelines. Specific vehicle requirements may vary.

5.1 Ngarencanakeun Instalasi

• lokasi: Identify suitable mounting locations in your vehicle, typically door panels or custom enclosures. Ensure sufficient mounting depth (2.72 inches / 69mm) and clearance.
• Wiring: Rencanakeun rute kabel spiker ti anjeun amplifier to the speaker locations. Avoid running speaker wires alongside power cables to prevent noise interference.
• AmpCocogkeun liifier: The PRO-GM6 has an 8 Ohm impedance and handles 140W RMS. Ensure your amplifier can safely deliver power within these specifications. Connecting an 8 Ohm speaker to a 4 Ohm amplifier output will result in lower power delivery than the amplifier's rated 4 Ohm output.

5.2 Pasang Speaker

Gambar: Sisi profile of the DS18 PRO-GM6 loudspeaker, illustrating its depth and mounting flange.

1. Nyiapkeun Permukaan Pemasangan: If installing in a new location, carefully cut a circular opening with a diameter of 5.70 inches (145mm). Ensure the surface is sturdy and free of obstructions.
2. Juru Bicara Posisi: Place the speaker into the opening, aligning the mounting holes with the pre-drilled holes or marking new ones.
3. Speaker Aman: Use appropriate screws (not included) to firmly secure the speaker to the mounting surface. Do not overtighten.

5.3 Sambungan Wiring

Gambar: Tukangeun view of the DS18 PRO-GM6 loudspeaker, showing the positive and negative speaker terminals.

1. Identipikasi Terminal: The speaker has clearly marked positive (+) and negative (-) terminals.
2. Sambungkeun kawat: Connect the positive (+) output from your amplifier to the positive (+) terminal on the speaker. Connect the negative (-) output from your amplifier to the negative (-) terminal on the speaker. Maintain correct polarity for all speakers in your system.
3. Sambungan Aman: Ensure all connections are tight and free from short circuits.

6. Parentah Operasi

The DS18 PRO-GM6 is a midrange loudspeaker designed to reproduce frequencies between 98 Hz and 10 KHz. It should be used as part of a complete car audio system, typically paired with subwoofers for low frequencies and tweeters for high frequencies.

• Integrasi Sistim: Connect the PRO-GM6 to an appropriate ampsaluran lirén.
• Setélan Crossover: For optimal sound quality and speaker protection, use an electronic crossover to filter out frequencies below 98 Hz (high-pass filter) and above 10 KHz (low-pass filter). Refer to your amplifier or head unit's manual for crossover adjustments.
• Ngaronjatkeun gain: Nyetél ampgain liifier kalawan bener pikeun cocog jeung voltase kaluarantage of your head unit. Avoid setting the gain too high, as this can lead to distortion and speaker damage.
• Periode istirahat: Allow a break-in period of approximately 10-20 hours of normal listening before operating the speakers at high volumes. This allows the speaker's suspension components to loosen and perform optimally.

7. Pangropéa

The DS18 PRO-GM6 loudspeaker requires minimal maintenance:

• beberesih: Use a soft, dry cloth to wipe the speaker cone and frame. Avoid using harsh chemicals or excessive moisture.
• Pamariksaan: Périodik pariksa sambungan spiker keur tightness tur pastikeun euweuh kawat anu frayed atawa kakeunaan.
• Perlindungan Lingkungan: While the speaker features a steel basket, it is not waterproof. Protect it from direct exposure to water and extreme temperatures.

8. Cara ngungkulan

9. Garansi jeung Rojongan

DS18 products are covered by a limited warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official DS18 website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact DS18 customer support directly.

Anjeun tiasa manggihan inpo nu leuwih lengkep sareng wincik kontak dina DS18 Official Store on Amazon.