Bubuka
Thank you for choosing the Project Source 2-Pack 7.4-in W White LED Flush Mount Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixtures. Please read this manual thoroughly before installation and retain it for future reference.
These LED flush mount ceiling lights are designed for both indoor and outdoor living spaces, featuring a wet-rated design. They are Energy Star rated for efficiency, provide a color temperature of 3000K, a Color Rendering Index (CRI) of 90, and an output of 730 lumens.
Émbaran Kasalametan
Always follow basic safety precautions when installing or working with electrical fixtures to reduce the risk of fire, electric shock, or personal injury.
- PERHATOSAN: Résiko shock listrik. Pegatkeun sambungan kakuatan dina sekering atawa circuit breaker saméméh masang atawa ngalayanan.
- PERHATOSAN: Résiko kahuruan. Anggo ngan ukur dina sirkuit anu dipeunteun pikeun perlengkapanna.
- Taroskeun ka tukang listrik anu mumpuni upami anjeun henteu yakin kana prosés pamasangan.
- Ulah ngarobah fixture dina sagala cara. Sakur modifikasi tiasa ngabatalkeun jaminan sareng nyiptakeun bahaya kaamanan.
- Pastikeun sadaya sambungan aman sareng insulated leres.
- Do not install near heat sources or in areas with excessive moisture beyond its wet-rated capabilities.
- This product is designed for direct wire connection and does not use a plug.
Naon dina Box
Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:
- 2 x Project Source 7.4-in LED Flush Mount Light Fixtures
- Pamasangan Hardware
- Kadali jauh (Note: While the product data mentions a remote control, typical flush mount lights of this type do not include one. Please verify your specific package contents.)
Setup (Pamasangan)
Installation should be performed by a qualified individual. Always ensure power is disconnected at the circuit breaker before starting.
- Pareuman Daya: Locate the circuit breaker controlling the light fixture's location and turn it off. Verify power is off using a voltage panguji.
- Nyiapkeun Permukaan Pemasangan: Pastikeun kotak listrik dipasang kalayan pageuh sareng mampuh nahan beurat fixture.
- Sambungkeun kawat: Connect the fixture's wires to the corresponding house wires using wire nuts (typically black to black, white to white, and ground to ground). Ensure all connections are tight and secure.
- Perlengkapan Gunung: Carefully align the fixture with the mounting holes on the electrical box and secure it using the provided mounting hardware.
- Mulangkeun Daya: Sakali fixture geus aman dipasang, balikkeun kakuatan dina circuit breaker.
Image: Two Project Source 7.4-inch white LED flush mount ceiling lights, showcasing their compact and low-profile design suitable for various indoor and outdoor applications.
Parentah Operasi
The Project Source LED Flush Mount Light operates like a standard ceiling light fixture. Once properly installed and power is restored, it can be controlled via a standard wall switch.
- Hurungkeun/Pareuman: Flip saklar témbok disambungkeun ka fixture pikeun ngahurungkeun atawa mareuman lampu.
- Énergi Énergi: As an Energy Star rated LED fixture, it consumes significantly less energy than traditional incandescent bulbs, providing long-term savings.
Pangropéa
These LED fixtures require minimal maintenance due to their long lifespan. However, occasional cleaning is recommended to maintain optimal light output and appearance.
- beberesih: Ensure power is off before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- umur panjang LED: The integrated LED light source is designed for long-term use and is not user-replaceable. If the LED fails, the entire fixture typically requires replacement.
Pamérésan masalah
Upami anjeun ngalaman masalah sareng lampu anjeun, tingali masalah sareng solusi umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lampu henteu hurung. | Taya kakuatan pikeun fixture nu; kabel leupas; switch lepat. | Pariksa circuit breaker. Pastikeun sadaya sambungan kabel aman. Nguji switch témbok. |
| Cahya ngageleber. | Loose wiring; incompatible dimmer switch (if applicable); power fluctuations. | Verify wire connections. Ensure the fixture is not connected to an incompatible dimmer. Consult an electrician for power issues. |
| Kaluaran lampu taram atanapi teu konsisten. | Dust accumulation on diffuser; aging LED components. | Clean the diffuser. If the issue persists and the fixture is old, it may be reaching the end of its lifespan. |
| Fixer ngaluarkeun sora ngaguruh. | Loose mounting; electrical interference. | Ensure fixture is securely mounted. Consult an electrician if noise persists. |
spésifikasi
- Jumlah modél: CLL56-2WW
- Ukuran produk: 7.4 x 7.4 x 1.4 inci
- beurat: 2.15 Pounds (per pack, total for 2 lights)
- merek: Sumber Proyék
- warna: Bodas
- Bentuk Lampu: Ceiling (Flush Mount)
- Pamakéan Indoor/Outdoor: Indoor/Outdoor (Wet Rated)
- Sumber Daya: Corded Electric (Direct Wire)
- Kaluaran cahaya: 730 Lumén
- Suhu warna: 3000K
- Indéks Rendering Warna (CRI): 90
- Peunteun Énergi: Énergi Star
Garansi sareng Rojongan
Project Source products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please contact Project Source customer service. Keep your purchase receipt as proof of purchase.
For assistance, please refer to the contact information provided on the product packaging or the official Project Source websitus.
