1. Bubuka
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This product is designed for driving and removing screws and for light drilling tasks in wood and metal, utilizing its impact mechanism for high torque applications.
2. Pitunjuk Kasalametan Umum
Always observe the following safety precautions when using power tools to prevent electric shock, fire, and serious injury.
- Kasalametan Area Gawé: Tetep wewengkon gawé beresih jeung well-cahayana. Wewengkon nu pabalatak atawa poek ngondang kacilakaan. Ulah ngajalankeun parabot kakuatan dina atmosfir ngabeledug, kayaning ku ayana cair kaduruk, gas, atawa lebu.
- Kasalametan listrik: Hindarkeun kontak awak sareng permukaan bumi atanapi grounded sapertos pipa, radiator, rentang, sareng kulkas. Aya ngaronjat résiko shock listrik lamun awak anjeun earthed atawa grounded.
- Kasalametan Pribadi: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating the tool for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
- Pamakéan sareng Perawatan Alat: Ulah maksakeun pakakas listrik. Anggo pakakas listrik anu pas pikeun aplikasi anjeun. Éta bakal ngalakukeun padamelan anu langkung saé sareng langkung aman dina laju anu dirancang pikeun éta. Cabut batré tina pakakas listrik sateuacan ngadamel pangaluyuan, ngarobih asesoris, atanapi nyimpen pakakas listrik.
- Paké Batré jeung Perawatan: Ngecas ukur nganggo carjer anu ditunjuk ku produsén. Pangecas anu cocog pikeun hiji jinis pak batré tiasa nyababkeun résiko seuneu nalika dianggo sareng pak batré anu sanés. Anggo alat-alat listrik ngan nganggo bungkus batré anu ditunjuk sacara khusus.
3. Produk Langkungview jeung Fitur
The Einhell TE-CI 18/1 Li Solo is a cordless impact driver designed for efficient screwdriving tasks. It is part of the Power X-Change family, allowing for interchangeable battery use with other Einhell tools.
- Kaluaran torsi tinggi: Delivers up to 140 Nm of torque, suitable for driving large or long screws.
- Kontrol Speed Variabel: Electronic speed control allows for precise adjustment, ideal for delicate applications.
- 1/4" Hex Bit Mount: Features a 6.35 mm (1/4") hexagon fitting for quick and secure bit changes.
- Lampu LED terpadu: Three power LEDs provide optimal illumination of the work area.
- Desain ergonomis: Short, lightweight design with Softgrip surfaces ensures comfortable and tireless operation.
- Konstruksi awét: Features an aluminum housing and rubber supports for enhanced protection and ruggedness.
- Klip sabuk: A practical belt clip is included for convenient carrying and access during work.
Figure 1: The Einhell TE-CI 18/1 Li Solo Cordless Impact Driver, illustrating its compact design and the Power X-Change battery interface (battery sold separately).
4. Setélan
4.1 Pamasangan Batré (Aki sareng Charger Dijual Papisah)
- Ensure the battery is fully charged using an Einhell Power X-Change charger.
- Align the battery pack with the base of the impact driver.
- Slide the battery pack into the tool until it clicks securely into place. Ensure it is firmly seated before operation.
- To remove the battery, press the release button(s) on the sides of the battery pack and slide it out.
4.2 Panyisipan sareng Panyabutan Bit
The impact driver uses a 1/4" (6.35 mm) hexagon fitting for impact-resistant bits.
- Pull the quick-change chuck sleeve forward.
- Insert the hexagon bit fully into the chuck.
- Release the sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is properly seated.
- To remove the bit, pull the sleeve forward again and extract the bit.
Figure 2: Detail of the 1/4" hex bit mount and the three integrated LED lights, providing clear visibility of the work area.
5. Parentah Operasi
5.1 Powering on / Pareum tur Speed Control
- Pikeun ngamimitian: Press the ON/OFF switch (trigger). The integrated LEDs will illuminate the work area.
- Pangaluyuan Kacepetan: The speed of the impact driver is controlled by the pressure applied to the ON/OFF switch. Pressing lightly results in lower speed, while pressing fully increases the speed up to 2300 RPM.
- Pikeun eureun: Leupaskeun switch ON / OFF.
5.2 Direction of Rotation
The direction of rotation (forward/reverse) is controlled by the selector switch located above the trigger.
- Forward Rotation (Screwing In): Push the selector switch to the left.
- Reverse Rotation (Screwing Out): Push the selector switch to the right.
- Posisi konci: When the selector switch is in the middle position, the ON/OFF switch is locked, preventing accidental activation. Always engage the lock when not in use or when changing bits.
5.3 Using the Impact Driver
- Select the appropriate impact-resistant bit for your screw type and material.
- Position the bit firmly on the screw head.
- Start the tool by gently pressing the trigger, increasing pressure as needed. The impact mechanism will engage automatically when resistance is met, providing additional torque.
- Maintain a firm grip on the tool. The low reverse torque design helps reduce strain on the user.
Figure 3: An individual demonstrating the use of the Einhell impact driver for driving a screw into a wooden surface, highlighting its practical application.
6. Pangropéa
Pangropéa rutin ngajamin umur panjang sareng kinerja optimal supir dampak anjeun.
- beberesih: Saatos unggal dianggo, bersihan wadah alat nganggo kapas anu lemesamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
- Panyimpenan: Store the impact driver and battery pack in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the tool before storage.
- Pamariksaan: Periodically check all screws and fasteners for tightness. Inspect the power tool for any signs of damage or wear. Do not use a damaged tool.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat henteu ngamimitian. | Battery not charged or improperly inserted. Selector switch in lock position. | Charge battery. Ensure battery is fully inserted. Move selector switch to forward or reverse. |
| Ngurangan kakuatan atawa kinerja. | Low battery charge. Incorrect bit for application. Overheating. | Recharge battery. Use appropriate impact-rated bit. Allow tool to cool down. |
| Bit teu dicekel pageuh. | Chuck sleeve not fully released. Bit not fully inserted. | Ensure chuck sleeve snaps back into place. Push bit in completely. |
8. Spésifikasi
| Fitur | Rincian |
|---|---|
| merek | Einhell |
| Nomer modél | TE-CI 18/1 Li Solo (4510034) |
| Sumber Daya | Battery Powered (18V Power X-Change) |
| Laju rotasi maksimum | 2300 rpm |
| Torsi maksimum | 140 Newton Méter |
| Bit Mount | 1/4" (6.35 mm) Hexagon |
| Voltage | 18 volt |
| Item Beurat | 1.18 Kilogram (2.58 pon) |
| Dimensi produk | 7.8 "L x 3.03" W x 6.65" H |
| Bahan | Rubber, Aluminium |
| Komponén Kaasup | Akku-Schlagschrauber (Impact Driver Body Only) |
| Batré Kaasup? | No |
| Batré Diperlukeun? | Yes (18V Lithium Ion) |
9. Garansi jeung Rojongan
Einhell Power Tools come with a standard 2-year warranty. An additional 1-year warranty is available upon product registration, extending the total warranty period to 3 years. For warranty claims, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell websitus.
The intelligent ABS Battery Electronics and high-performance Li-Ion cells in Power X-Change batteries ensure efficiency, reliability, and durability.
