Manual Instruksi Freezer Merchandiser True GDM-72F-HC~TSL01 Triple Swing Glass Door

1. Bubuka

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your True GDM-72F-HC~TSL01 Triple Swing Glass Door Merchandiser Freezer. Please read this manual thoroughly before installation and operation to ensure proper usage and to prevent potential hazards.

The True GDM-72F-HC~TSL01 is a commercial-grade merchandiser freezer designed for displaying frozen food and ice cream. It features a self-contained capillary tube system utilizing environmentally friendly R290 hydrocarbon refrigerant, maintaining temperatures at -10°F (-23.3°C).

2. Émbaran Kasalametan

Pitunjuk Kasalametan Penting:

• Salawasna pegatkeun sambungan kakuatan saméméh ngalakukeun sagala pangropéa atawa beberesih.
• Ensure the unit is installed on a level, stable surface capable of supporting its weight.
• Maintain adequate ventilation around the unit to prevent overheating.
• Ulah nyimpen bahan ngabeledug sapertos kaléng aerosol kalayan propelan anu gampang kaduruk dina alat ieu.
• Only qualified personnel should perform repairs or service on the refrigeration system.
• Keep all ventilation openings in the appliance enclosure or in the structure for building-in, clear of obstruction.

3. Fitur Produk

• High-quality construction for attractive display of frozen food and ice cream.
• Factory engineered, self-contained capillary tube system using R290 hydrocarbon refrigerant.
• Zero ozone depletion potential (ODP) and low global warming potential (GWP) refrigerant.
• Maintains consistent temperatures of -10°F (-23.3°C) for optimal frozen product storage.
• Triple pane thermal insulated glass door assemblies with white powder-coated frames.
• Twelve (12) adjustable, heavy-duty PVC coated wire shelves (24 1/8"L x 20 3/4"D).
• LED interior lighting for enhanced product visibility.
• Durable non-peel or chip black powder-coated cold rolled steel exterior.
• NSF approved white aluminum interior liner with stainless steel floor.
• Self-closing doors with positive seal, torsion-type closure system.
• Bottom-mounted unit design for maximized product visibility and easy condenser coil access.

4. Setup jeung Instalasi

4.1 Ngabongkar bungkusan

• Carefully remove all packaging materials, including any protective films or tapes.
• Inspect the unit for any shipping damage. Report any damage immediately to the carrier and supplier.

4.2 Lokasi

• Place the freezer on a strong, level surface capable of supporting the unit's weight when fully loaded.
• Ensure adequate clearance around the unit for proper ventilation (minimum 6 inches from walls).
• Hindarkeun sinar panonpoé langsung, sumber panas, atanapi daérah anu kalembabanna luhur.

4.3 Sambungan Listrik

• Connect the unit to a dedicated electrical circuit with the correct voltage jeung amperage as specified on the unit's data plate.
• Ulah make kabel extension atawa colokan adaptor.
• Pastikeun grounding ditangtoskeun pikeun nyegah shock listrik.

4.4 Mimiti Mimiti

• After positioning and connecting power, allow the unit to sit for at least 2 hours before plugging it in. This allows refrigerants to settle.
• Plug in the unit. The compressor will start, and the interior lights will illuminate.
• Allow the unit to run empty for several hours (e.g., 4-6 hours) to reach its operating temperature before loading products.

5. Parentah Operasi

5.1 Kontrol Suhu

• The freezer is factory-set to maintain approximately -10°F (-23.3°C).
• Refer to the digital temperature controller (if equipped) for specific adjustment instructions. Typically, adjustments involve pressing 'SET' and using arrow keys.

5.2 Ngamuat Produk

• Load products evenly on the shelves. Do not block the air circulation vents inside the cabinet.
• Avoid overloading shelves beyond their weight capacity.
• Ensure products do not obstruct the closing of the doors.

5.3 Panggunaan Panto

• The doors are self-closing. Ensure they close completely after each use to maintain temperature and energy efficiency.
• Avoid leaving doors open for extended periods.

6. Pangropéa

6.1 Ngabersihan Interior

• Pegatkeun sambungan kakuatan saméméh beberesih.
• Use a mild soap and warm water solution to clean interior surfaces. Avoid abrasive cleaners.
• Wipe down shelves and interior walls regularly.
• Bilas ku cai beresih sareng garing garing.

6.2 Ngabersihan Exterior

• Wipe exterior surfaces with a soft cloth and mild detergent.
• Clean glass doors with a non-abrasive glass cleaner.

6.3 Pabersihan Koil Kondensor

• The condenser coil is located at the bottom of the unit and should be cleaned regularly (monthly or quarterly, depending on environment).
• Pegatkeun sambungan kakuatan.
• Leupaskeun grille hareup.
• Use a stiff brush or vacuum cleaner to remove dust and debris from the condenser fins.
• Replace the front grille and reconnect power.
• Catetan: A dirty condenser coil reduces efficiency and can lead to compressor failure.

6.4 Pangropéa Gasket

• Inspect door gaskets regularly for tears or damage.
• Clean gaskets with warm water and mild soap to maintain their sealing properties.

7. Cara ngungkulan

Sateuacan ngahubungan jasa, ulangview masalah umum sareng solusi ieu:

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information, technical support, or service inquiries, please contact True Manufacturing directly or refer to the official True websitus. Simpen resi pameseran sareng nomer modél anjeun nalika ngahubungi dukungan.

Pabrikan: True Manufacturing

model: GDM-72F-HC~TSL01