Toyama TD 5500 SGE Diesel Generator User Manual

1. Produk Langkungview

The Toyama TD 5500 SGE is a silent series diesel generator, enclosed in a cabin for reduced noise. It is equipped with a 10HP engine and electric start, providing a maximum power output of 5.8 KVA and a nominal power output of 5.0 KVA. This bivolt (dual voltage) generator features a 16-liter fuel tank, offering approximately 7.6 hours of autonomy. It is designed for reliable power generation in various applications.

Gambar 1: Hareupeun view of the Toyama TD 5500 SGE Diesel Generator, showing the control panel, fuel cap, and wheels.

2. Setup jeung Instalasi

Setelan anu leres penting pisan pikeun operasi anu aman sareng efisien. Turutan léngkah-léngkah ieu kalayan saksama:

1. Ngabongkar bungkusan: Carefully remove the generator from its packaging. Inspect for any shipping damage. Retain packaging materials for future transport or storage.
2. panempatan: Position the generator on a firm, level surface outdoors, away from windows, doors, and vents to prevent carbon monoxide accumulation. Ensure adequate ventilation and clearance from combustible materials (at least 1 meter on all sides).
3. Wheel Assembly (if not pre-assembled): Attach the wheels and handles according to the diagrams in the separate assembly guide (if provided).
4. Tambahkeun oli mesin: Before first use, fill the engine crankcase with the recommended type and amount of diesel engine oil. Refer to the oil dipstick for the correct level. Do not overfill.
5. Tambahkeun BBM: Fill the fuel tank with clean, fresh diesel fuel. Do not use gasoline or other fuels. Ensure the fuel cap is securely tightened after filling. The tank capacity is 16 liters.
6. Battery Connection (for Electric Start): Connect the battery cables to the generator's battery terminals, ensuring correct polarity (positive to positive, negative to negative).
7. Grounding: Connect a grounding wire from the generator's grounding terminal to a suitable earth ground rod. This is a critical safety measure.

3. Parentah Operasi

Follow these steps for safe and effective operation of your generator:

3.1 Daptar pariksa Pra-Mimitian

• Pariksa tingkat oli mesin.
• Pariksa tingkat bahan bakar.
• Pastikeun sadaya beban listrik dicabut tina stop kontak generator.
• Pariksa grounding anu leres.
• Confirm generator is on a level surface with adequate ventilation.

3.2 Starting the Generator (Electric Start)

1. Hurungkeun klep suluh ka posisi "ON".
2. Ensure the engine switch is in the "ON" or "RUN" position.
3. Insert the key into the ignition switch and turn it to the "START" position. Hold until the engine starts (typically a few seconds). Do not crank for more than 5 seconds at a time; allow a 10-second cool-down period between attempts.
4. Once the engine starts, release the key, and it will return to the "ON" position.
5. Allow the generator to warm up for a few minutes before connecting any electrical loads.

3.3 Nyambungkeun Beban Listrik

• Connect appliances or extension cords to the generator's outlets.
• Ulah ngaleuwihan kapasitas generator. Total dayatage of connected devices must not exceed the generator's nominal power output (5.0 KVA or 5000 Watts).
• Salawasna anggo kabel ekstensi tugas beurat anu cocog pikeun luar ruangan.

3.4 Pareuman Generator

1. Pegatkeun sambungan sadaya beban listrik ti outlet generator.
2. Keun generator jalan salami sababaraha menit tanpa beban niiskeun heula.
3. Hurungkeun saklar mesin ka posisi "OFF".
4. Hurungkeun klep suluh ka posisi "OFF".

4. Pangropéa

Regular maintenance ensures the longevity and reliable performance of your generator. Always perform maintenance with the engine off and cool.

4.1 Daily/Before Each Use

• Pariksa tingkat oli mesin.
• Pariksa tingkat bahan bakar.
• Inspect for any visible leaks (fuel, oil).
• Check air filter for excessive dirt.

4.2 Every 50 Hours or Monthly

• Ganti oli mesin.
• Ngabersihan atawa ngaganti saringan hawa.
• Inspect and clean spark plug (if applicable, though diesel engines typically use glow plugs).
• Check battery terminals for corrosion and ensure connections are tight.

4.3 Every 200 Hours or Annually

• Ganti saringan bahan bakar.
• Inspect fuel lines for cracks or damage.
• Check valve clearance (should be performed by a qualified technician).
• Clean cooling fins and air passages.

For detailed maintenance procedures and specific oil/filter types, refer to the complete service manual or consult a certified Toyama service center.

5. Cara ngungkulan

This section provides solutions to common operational issues. For problems not listed here, contact Toyama customer support.

6. Spésifikasi Téknis

7. Garansi jeung Rojongan

For information regarding the product warranty, please refer to the warranty card included with your generator or visit the official Toyama website. For technical support, spare parts, or service inquiries, please contact an authorized Toyama service center or your point of purchase.

Always provide your product model number (TD 5500 SGE) and serial number when contacting support to ensure efficient service.