1. Bubuka
This manual provides comprehensive instructions for the Blackstar HT Club 40 Mark II 40-Watt 1x12 Tube Combo Amp. It covers essential information for setup, operation, maintenance, and troubleshooting, ensuring optimal performance and longevity of your amplifier. The HT Club 40 Mark II features revoiced clean and overdrive channels, Blackstar's Infinite Shape Feature (ISF), two reverb textures, and a speaker-emulated output.
Please read this manual thoroughly before operating your amplifier to ensure safe and correct usage.
2. Parentah Kasalametan penting
- Baca pituduh: Simpen manual ieu pikeun rujukan ka hareup.
- Perhatoskeun Perhatosan: Follow all warnings on the amplifier and in this manual.
- Cai & Uap: Ulah make alat ieu deukeut cai atawa ngalaan eta kana netes atawa splashing.
- Panas: Entong dipasang di deukeut sumber panas sapertos radiator, register panas, kompor, atanapi aparat sanésna (kalebet ampLiifiers) anu ngahasilkeun panas.
- Kabel listrik: Nangtayungan kabel kakuatan tina keur leumpang dina atawa pinched.
- Palayanan: Rujuk sadayana jasa ka tanaga jasa anu mumpuni. Diperlukeun ngalayanan nalika aparatur ruksak ku cara naon waé, sapertos kabel catu daya atanapi colokan rusak, cairan tumpah atanapi barang murag kana aparatur, aparatur parantos kakeunaan hujan atanapi lembab, henteu beroperasi normal. , atawa geus turun.
- Ventilasi: Do not block any ventilation openings. Ensure proper airflow around the amppangagung.
- Grounding: Ieu amplifier must be grounded. Do not defeat the safety purpose of the polarized or grounding-type plug.
- Tabung: tabung amplifiers operate at high voltages and generate significant heat. Do not attempt to replace tubes or service the internal components unless you are a qualified technician.
3. Produk Langkungview
3.1 Kadali Panel hareup
The front panel provides access to all primary controls for shaping your ampnada sora liifier.
Gambar: Hareupeun view of the Blackstar HT Club 40 Mark II amplifier. Gambar ieu nampilkeun amplifier's front face, including the Blackstar logo, speaker grille, and the entire control panel at the top. The control panel features input jacks, various knobs for Clean and Overdrive channels, EQ settings, Reverb, Master Volume, and Power/Standby switches.
- Input: Jack 1/4" pikeun nyambungkeun gitar anjeun.
- Saluran bersih:
- Volume: Controls the overall output level of the clean channel.
- Bass, Treble: Tone controls for the clean channel.
- Switch sora: Alters the clean channel's voicing for different tonal characteristics.
- Overdrive Channel:
- Keuntungan: Controls the amount of overdrive/distortion.
- Volume: Controls the overall output level of the overdrive channel.
- Bass, Tengah, Treble: Tone controls for the overdrive channel.
- ISF (Fitur Wangun Tanpa Wates): Sweeps between a 'British' and 'American' amplifier tone.
- Switch sora: Alters the overdrive channel's voicing.
- Reverb: Ngontrol tingkat éfék reverb digital bawaan.
- Jilid Master: Ngadalikeun volume kaluaran sakabéh tina amppangagung.
- Switch sayaga: Places the amplifier in standby mode, allowing tubes to warm up or cool down without signal passing through.
- Saklar kakuatan: Ngahurungkeun amplifier atawa mareuman.
3.2 Sambungan Panel Rear
The rear panel provides various input and output connections for external devices and speaker configurations.
Gambar: Tukangeun view of the Blackstar HT Club 40 Mark II amplifier. This image shows the back of the amplifier, detailing the mains input, fuse holder, speaker outputs, emulated output, effects loop (send/return), footswitch input, and USB audio port.
- Input Utama: Pikeun nyambungkeun kabel daya anu disayogikeun.
- HT Fuse: Main power fuse. Ensure correct rating is used for replacement.
- Kaluaran Speaker: Connections for external speaker cabinets. Ensure correct impedance matching (1x16 Ohm, 1x8 Ohm, 2x16 Ohm).
- Emulated Output: Provides a speaker-emulated signal for direct recording or connection to a PA system.
- Effects Loop (Send/Return): For connecting external effects pedals or processors.
- Saklar suku: Input for the supplied 2-way footswitch to switch channels and reverb.
- Audio USB: For direct recording to a computer.
4. Setélan
4.1 Ngabongkar sareng Nempatkeun
Ati-ati ngaleupaskeun amplifier from its packaging. Place the amplifier on a stable, level surface, ensuring adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
4.2 Sambungan Daya
- Pastikeun amplifier's power switch is in the 'OFF' position and the standby switch is in 'STANDBY'.
- Connect the supplied mains power cable to the 'Mains Input' on the rear panel and then to a suitable grounded power outlet.
4.3 Connecting Your Instrument and Speakers
- Connect your guitar to the 'Input' jack on the front panel using a high-quality instrument cable.
- If using an external speaker cabinet, connect it to the appropriate 'Speaker Outputs' on the rear panel, ensuring correct impedance matching. The internal speaker is 16 Ohm.
- For silent practice or recording, connect to the 'Emulated Output' or 'USB Audio' as needed.
5. Parentah Operasi
5.1 Ngahurungkeun sareng mareuman
- Daya Hurung: With the standby switch in 'STANDBY', turn the 'Power' switch to 'ON'. Allow approximately 2-3 minutes for the tubes to warm up.
- After the warm-up period, switch the 'Standby' switch to 'ON' to activate the amppangagung.
- Pareum listrik: Switch the 'Standby' switch to 'STANDBY'.
- Turn the 'Power' switch to 'OFF'.
5.2 Channel Operation
- Saluran bersih: Use the 'Volume', 'Bass', and 'Treble' controls to dial in your desired clean tone. The 'Voice' switch provides additional tonal options.
- Overdrive Channel: Engage the overdrive channel using the footswitch or the front panel switch. Adjust 'Gain' for distortion level, 'Volume' for channel output, and 'Bass', 'Middle', 'Treble' for EQ. The 'ISF' control allows continuous blending between British and American amplifier characteristics. The 'Voice' switch offers further tonal variations.
5.3 Reverb and Master Volume
- Reverb: Adjust the 'Reverb' knob to control the amount of digital reverb applied to your sound.
- Jilid Master: This control sets the overall output level of the amplifier, affecting both channels.
5.4 Emulated Output and USB Audio
- Emulated Output: Connect to a mixing console or recording interface for a speaker-emulated signal. This is useful for direct recording or live sound reinforcement without miking the speaker.
- Audio USB: Connect to your computer via a USB cable for direct digital recording. Refer to Blackstar's website for driver installation and software compatibility.
5.5 Pangurangan kakuatan
The HT Club 40 Mark II features a power reduction option, allowing you to switch between 40 Watts and 4 Watts output. This is ideal for achieving saturated tube tones at lower volumes for home practice or smaller venues. Consult the amplifier's specific controls for engaging this feature, typically found on the rear panel or via a dedicated switch.
6. Pangropéa
6.1 beberesih
Ngabersihan amplifier's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the amplifier is unplugged before cleaning.
6.2 Panggantian Tabung
Vacuum tubes have a finite lifespan and will eventually need replacement. Symptoms of worn tubes include reduced output, loss of tone, or excessive noise. Due to high internal voltages and the need for proper biasing, tube replacement and biasing should only be performed by a qualified service technician. Incorrect biasing can lead to premature tube failure and damage to the amppangagung.
6.3 Perawatan Umum
- Hindarkeun ngalaan éta ampLifier ka suhu ekstrim atanapi kalembaban.
- Angkutan ka amplifier carefully to prevent physical damage.
- Always use appropriate speaker cables for connections; never use instrument cables for speakers.
7. Cara ngungkulan
If you experience issues with your Blackstar HT Club 40 Mark II, consult the following table. For problems not listed or if issues persist, contact qualified service personnel.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya sora | Power not on, standby engaged, faulty cable, speaker disconnected, faulty tube. | Ensure power is on and standby is disengaged. Check all cables. Verify speaker connection. Consult technician for tube issues. |
| Sora lemah atawa menyimpang | Worn tubes, incorrect settings, faulty instrument/cable. | Check gain and volume settings. Test with a different instrument/cable. Consult technician for tube inspection/replacement. |
| Dengung atawa sora nu kaleuleuwihi | Ground loop, faulty power supply, proximity to interference, worn tubes. | Ensure proper grounding. Try a different power outlet. Move away from other electronic devices. Consult technician for tube or internal component issues. |
| Scratchy knobs/pots | Dust or wear in potentiometers. | This can sometimes be resolved with specialized contact cleaner, but often indicates wear. If persistent, professional servicing may be required. |
| Overdrive gain jumpy/unresponsive | Faulty potentiometer or circuit issue. | This indicates a component fault. Professional servicing is required. |
8. Spésifikasi
Detailed technical specifications for the Blackstar HT Club 40 Mark II amppangagung.
Image: Dimensions of the Blackstar HT Club 40 Mark II amplifier. The image shows the amplifier from an angled perspective with arrows and numerical labels indicating its width (29.13"), height (24.8"), and depth (14.96").
| Fitur | Spésifikasi |
|---|---|
| Nomer modél | 056309 |
| Kaluaran Wattage | 40 Watt (tiasa dirobah janten 4 Watt) |
| Speaker | 1 x 12 inci |
| Saluran | 2 (Bersih, Overdrive) |
| Kadali | Volume, Bass, Treble (Clean); Gain, Volume, Bass, Middle, Treble, ISF (Overdrive); Reverb Level, Master Volume |
| Balukar | Digital Reverb, Effects Loop |
| Konektipitas | Guitar Input, Speaker Outputs (1x16 Ohm, 1x8 Ohm, 2x16 Ohm), Emulated Output, Footswitch, USB Audio |
| Ukuran produk (L x W x H) | 14.96 x 29.13 x 24.8 inci |
| Item Beurat | 62.5 pon |
| Alat nu cocog | Gitar |
| Bahan | Lead (Note: This refers to internal components, not external casing) |
| Produsén | Blackstar |
| Tanggal Kahiji Sadia | 1 Nopémber 2017 |
9. Garansi jeung Rojongan
Blackstar products are manufactured to the highest standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Blackstar Amplifikasi websitus.
For technical support, service inquiries, or to locate an authorized service center, please visit the Blackstar Amplification official website or contact their customer support directly. Always provide your product model number (056309) and serial number when seeking support.
Blackstar Amplification Official Websitus: www.blackstaramps.com
