Kendal All in One Foot Spa Bath Massager FBD18 Instruction Manual

Parentah Kasalametan penting

Please read all instructions carefully before using your Kendal Foot Spa Bath Massager. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always ensure the unit is unplugged before filling or emptying water.
• Do not operate the foot spa without water.
• Jauhkeun kabel listrik tina permukaan anu dipanaskeun.
• Do not use if the unit or power cord is damaged.
• Avoid placing feet too close to the water outlet during heating, as the temperature near the outlet can be high.
• Perkakas ieu kanggo panggunaan rumah tangga wungkul.
• Jauhkeun tina jangkauan barudak.
• Ulah nangtung dina unit.
• If you have any medical conditions, consult a doctor before use.

Produk Leuwihview

Komponén

The Kendal Foot Spa Bath Massager FBD18 is designed for comfort and relaxation. Below are its main components:

Image: Diagram showing the labeled components of the Kendal Foot Spa, including the control panel, air nozzles, heating area, stimulus nodes, rollers, red light, and rubber feet.

Fitur konci

• Fungsi Sadaya-dina-Hiji: Combines heating therapy, O2 bubble massage, and digital controls.
• Kontrol Suhu Digital: Uses a quality PTC heating semiconductor to adjust and maintain water temperature between approximately 95°F (35°C) and 118°F (48°C).
• Fungsi Timer: Allows setting a massage duration for convenience.
• Pijat Rollers: Features two active rollers for targeted foot massage, which can be removed.
• Konstruksi awét: Made from high-quality, temperature-resistant plastic with secure multi-insulation protection.
• Fitur kaamanan: Includes electric leakage protection and UL listing for safety.

Gambar: A luhur-handap view of the Kendal Foot Spa, showing the digital display, control buttons, and bubbling water inside the basin.

Disetél

Ngabuka Spa Suku

1. Tempatkeun spa suku anu dilipet dina permukaan anu datar sareng stabil.
2. Gently press down on the center of the base while pulling up on the sides to expand the basin. Ensure all sides are fully extended and locked into place.

Ngeusian ku Cai

• Ensure the unit is unplugged before adding water.
• Fill the foot spa with warm water up to the 'MAX' water level line indicated inside the basin. Using warm water initially will help the unit reach your desired temperature faster.
• Do not overfill to prevent splashing during operation.

Image: A hand pressing the power button on the digital control panel of the Kendal Foot Spa, illustrating the ease of interaction.

Parentah Operasi

Daya Hurung/Pareuman

• Colokkeun kabel listrik kana stop kontak 110V standar, 60Hz.
• Pencét éta ON/OFF button on the control panel to turn the unit on. The digital display will illuminate.
• Pencét éta ON/OFF tombol deui pikeun mareuman unit.

Kontrol Suhu

• Saatos diaktipkeun, pencét tombol TEMP + or TEMP- buttons to adjust the desired water temperature. The temperature range is approximately 95°F (35°C) to 118°F (48°C).
• The red light will indicate that the heating element is active. Once the water reaches the preset temperature, the red light will automatically turn off.

Fungsi Timer

• Pencét éta TIMER button to set the desired duration for your foot spa session. The available time settings typically range from 10 to 60 minutes.

Massage Modes and Bubbles

• The foot spa features O2 bubbles for a relaxing sensation. Press the BOBBLE button to activate or deactivate the bubble function.
• The integrated rollers at the bottom provide a manual massage. Gently move your feet back and forth over the rollers to stimulate acupoints and relieve fatigue. These rollers can be removed if you prefer a flat surface.

Image: A person's feet are comfortably soaking in the Kendal Foot Spa, with visible bubbles and the red light indicating active heating.

Pangropéa jeung beberesih

• Drining: After each use, unplug the unit. Carefully lift the foot spa using the integrated handle and pour out the water.
• beberesih: Lap bagian jero sareng luar unit nganggo kaén anu lemes,amp lawon. Ulah make cleaners abrasive atawa bahan kimia kasar.
• Roller Removal: The massage rollers can be easily removed for cleaning or if you prefer not to use them during your foot spa session.
• Panyimpenan: Ensure the unit is completely dry before storing. The collapsible design allows for compact storage in small spaces.

Pamérésan masalah

• Unit teu hurung: Ensure the power cord is securely plugged into a working electrical outlet. Check if the outlet has power.
• Cai teu dipanaskeun: Verify that the unit is powered on and the temperature is set above the current water temperature. Ensure there is sufficient water in the basin.
• No bubbles: Check if the bubble function is activated via the control panel. Ensure the water level is adequate.
• Unit pareum teu disangka-sangka: This may be a safety feature to prevent overheating. Unplug the unit, allow it to cool down, and check for any obstructions or issues before restarting.

spésifikasi

Image: A diagram illustrating the dimensions of the Kendal Foot Spa, showing its length, width, and height.

Garansi sareng Rojongan

For warranty information and customer support, please refer to the documentation included with your product or contact Kendal customer service directly. Keep your purchase receipt for warranty claims.