1. Produk Langkungview
The Uponor Smatrix Base T-145 is a wired digital room thermostat designed for precise temperature control in heating and cooling systems, particularly underfloor heating. It directly transmits measured values to the Smatrix Base X-145 control module, ensuring efficient and responsive climate management. This thermostat features a clear digital display for easy temperature adjustment and monitoring.
Gambar 1.1: Hareupeun view of the Uponor Smatrix Base T-145 Wired Room Thermostat, showing its square white casing and central rotary dial for temperature adjustment. The 'Uponor' logo is visible at the bottom left.
2. Fitur konci
- Digital Temperature Setting: Allows precise adjustment of the desired room temperature.
- Témbongkeun Vérsi Software: Shows the software version upon startup.
- Layar Backlit: The display illuminates for 10 seconds after activation for improved visibility.
- Heating/Cooling Indicator: Clearly displays the current operating mode.
- Setback Function: Enables energy-saving temperature reduction during unoccupied periods.
- Setback Temperature Display: Shows the active setback temperature.
- Pilihan Unit Suhu: Pindah antara Celsius sareng Fahrenheit.
- Pintonan Status Batré: Indicates the status of any internal backup battery or connected sensor batteries.
- Flexible Sensor Options: Supports room temperature (RT), floor sensor with max/min limits (FT), remote sensor (FS), and outdoor sensor (RO) inputs.
- Individual Room Cooling: Capable of managing cooling functions on a room-by-room basis.
3. Spésifikasi Téknis
| merek | Kana |
| Nomer modél | 1086974 |
| Warna | Bodas (RAL 9016) |
| Ukuran (H x W x D) | 80 x 80 x 26.5 mm |
| Item Beurat | 120 gram |
| Sasayogian tanaga | 4-wire bus (Wired) |
| Voltage | 24 volt |
| Téhnologi konektipitas | Dikabel |
| Kelas panyalindungan | IP 30 |
| minuhan | CE |
| Tipe Controller | Kontrol Manual |
| Tipe Kontrol Suhu | Digital |
| Mangpaat husus | Panaskeun Underfloor |
| Komponén Kaasup | Room thermostat and mounting hardware |
4. Émbaran Kasalametan
Mangga baca sareng ngartos sadaya parentah kaamanan sateuacan masang atanapi ngoperasikeun alat ieu. Gagalna nuturkeun parentah ieu bisa ngakibatkeun shock listrik, seuneu, atawa karuksakan harta.
- Kasalametan listrik: Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure power is disconnected at the main circuit breaker before any wiring work.
- Kaayaan Lingkungan: Do not expose the thermostat to direct water spray, excessive humidity, or extreme temperatures outside its operating range. The device has an IP30 protection rating, meaning it is protected against solid objects over 2.5mm but not against water.
- Dimaksudkeun pamakéan: This thermostat is designed for controlling heating and cooling systems. Do not use it for purposes other than its intended function.
- beberesih: Anggo kaén anu lemes sareng garing pikeun beberesih. Ulah make cleaners abrasive atawa pangleyur.
5. Instalasi jeung Setup
The Uponor Smatrix Base T-145 thermostat is a wired device requiring connection to an Uponor Smatrix Base X-145 control module via a 4-wire bus system. Professional installation is recommended.
5.1 Pamasangan
- Pegatkeun daya: Ensure the main power supply to the heating/cooling system is turned off at the circuit breaker before beginning installation.
- Pilihan lokasi: Choose an indoor location on an interior wall, away from direct sunlight, drafts, and heat sources (e.g., lamps, appliances) that could affect temperature readings. Mount at a standard thermostat height (approximately 1.5 meters from the floor).
- Wiring: Connect the 4-wire bus cable from the Smatrix Base X-145 control module to the designated terminals on the T-145 thermostat. Refer to the wiring diagram provided with the Smatrix Base X-145 control module for specific terminal assignments.
- Pamasangan Aman: Use the provided mounting hardware to securely attach the thermostat to the wall.
5.2 Setup Awal
- Daya Hurung: Restore power to the system at the circuit breaker. The thermostat display should illuminate.
- Software Version Check: Upon initial power-up, the software version will briefly display.
- Unit Suhu: If necessary, adjust the temperature unit between Celsius and Fahrenheit according to the operating instructions in Section 6.
- Konfigurasi sénsor: If using optional floor, remote, or outdoor sensors, ensure they are correctly connected and configured within the Smatrix Base X-145 control module. The thermostat can display readings from these sensors.
6. Operasi
The Uponor Smatrix Base T-145 thermostat provides straightforward control over your room's temperature.
6.1 Nyetél Suhu
- Rotate the central dial clockwise to increase the desired temperature.
- Rotate the central dial counter-clockwise to decrease the desired temperature.
- The digital display will show the set temperature. The backlight will activate for 10 seconds after adjustment.
6.2 Émbaran tampilan
- Suhu ayeuna: The main display shows the current room temperature.
- Setel Suhu: Briefly displayed when adjusting the dial.
- Modeu operasi: An icon or text indicates if the system is currently heating or cooling.
- Setback Indicator: If the setback function is active, an indicator will show, along with the setback temperature.
- Status batré: Displays the status of any internal backup battery or connected sensor batteries.
6.3 Changing Temperature Units (Celsius/Fahrenheit)
Specific instructions for changing temperature units are typically found in the main Smatrix Base X-145 control module manual or accessed via a combination of button presses on the thermostat. Consult the comprehensive system manual for detailed steps.
7. Pangropéa
The Uponor Smatrix Base T-145 thermostat requires minimal maintenance to ensure optimal performance.
- beberesih: Periodically wipe the thermostat's exterior with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or excessive moisture.
- Cék sénsor: If using external sensors (floor, remote, outdoor), ensure they are free from obstructions and debris that could affect their readings.
- Pariksa Sistim: Regularly check the overall heating/cooling system for proper operation as per the Smatrix Base X-145 control module manual.
8. Cara ngungkulan
If you encounter issues with your Uponor Smatrix Base T-145 thermostat, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Layar kosong atanapi teu ngaréspon. | No power to the thermostat or control module. | Check the main power supply and circuit breaker. Ensure the 4-wire bus connection is secure. |
| Maca suhu anu salah. | Lokasi termostat kapangaruhan ku angin, sinar panonpoé langsung, atanapi sumber panas. | Relocate the thermostat if possible, or shield it from interfering elements. Ensure no external sensors are faulty or obstructed. |
| Sistem pemanasan / cooling teu ngabales. | Communication issue with Smatrix Base X-145 control module or system fault. | Verify the 4-wire bus connection. Check the Smatrix Base X-145 control module for error indicators. Consult the Smatrix Base X-145 manual for system-level troubleshooting. |
| Setback function not working as expected. | Incorrect configuration in the Smatrix Base X-145 control module. | Review the setback schedule and settings within the Smatrix Base X-145 control module. |
If the problem persists after attempting these solutions, contact Uponor customer support or a qualified HVAC technician.
9. Garansi jeung Rojongan
For warranty information, technical support, or service inquiries regarding your Uponor Smatrix Base T-145 Wired Room Thermostat, please refer to the documentation included with your complete Uponor Smatrix system or visit the official Uponor websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.
Pabrikan: Kana
Jumlah modél: 1086974
ASIN: B077CLZPJ8
