PHASAK SIRIUS PH 7322 UPS 2260VA Uninterruptible Power Supply User Manual

1. Bubuka

This manual provides essential instructions for the installation, operation, and maintenance of your PHASAK SIRIUS PH 7322 Uninterruptible Power Supply (UPS). The SIRIUS Interactive series offers reliable protection against power variations and spikes, ensuring stable and clean energy for connected equipment. Please read this manual thoroughly before using the device to ensure proper function and safety.

2. Parentah Kasalametan

Observe the following safety precautions to prevent injury and damage to the UPS or connected equipment:

• Ulah muka UPS casing. Henteu aya bagian anu tiasa dilayanan ku pangguna di jero. Rujuk sadayana jasa ka tanaga jasa anu mumpuni.
• Do not connect appliances that could overload the UPS, such as laser printers, to battery-backed outlets (use surge-only outlets for these).
• Ensure the UPS is placed in a well-ventilated area, away from direct sunlight, heat sources, and moisture.
• Connect the UPS to a grounded AC power outlet only.
• In case of emergency, press the power button to turn off the UPS and disconnect it from the AC power source.
• The UPS contains internal batteries. Do not dispose of the UPS or its batteries in fire. Batteries may explode.

3. Fitur Produk

The PHASAK SIRIUS PH 7322 UPS is equipped with several features designed for optimal performance and protection:

• LCD / LED function display for real-time status monitoring.
• Otomatis Voltage Regulator (AVR) to stabilize input voltage tanpa ngagunakeun daya batre.
• Auto restart/auto-reload function for convenience after power restoration.
• Compatibility with generators for flexible power input.
• Communication: 1 x USB port for connection to a computer.
• Outlets: 3 x Schuko outlets with battery backup and surge protection, and 1 x Schuko outlet with surge protection only.

4. Setélan

4.1 Ngabongkar sareng Nempatkeun

• Carefully unpack the UPS and inspect it for any shipping damage.
• Place the UPS on a flat, stable surface in a clean, dry, and well-ventilated environment. Avoid areas with excessive dust, humidity, or extreme temperatures.
• Ensure there is adequate clearance around the UPS for proper airflow, especially around ventilation openings.

4.2 Nyambungkeun UPS

Refer to the rear panel diagram for outlet identification.

Figure 1: Rear Panel Connections. This image displays the back of the PHASAK SIRIUS PH 7322 UPS, highlighting the four Schuko outlets (three with surge and battery backup, one with surge protection only), the USB communication port, and the circuit breaker button.

1. Nyambung ka Daya AC: Colokkeun kabel listrik UPS kana stop kontak témbok grounded.
2. Alat Sambungkeun:
   • Connect critical equipment (e.g., computers, monitors, network devices) to the Surge & Battery outlets (typically 3 outlets). These outlets provide both surge protection and battery backup during power outages.
   • Connect non-critical equipment that requires only surge protection (e.g., laser printers, scanners) to the Surge Ngan outlet (typically 1 outlet).
3. Komunikasi USB: Connect the provided USB cable from the UPS USB port to your computer. Install the PowerGuide management software (available from Phasak's website) to enable advanced monitoring and shutdown features.

Ngidinan UPS ngecas sahenteuna 8 jam sateuacan dianggo awal pikeun mastikeun kapasitas batré pinuh.

5. Operasi

5.1 Powering on / Pareum

Figure 2: Front Panel Display and Controls. This image shows the front of the PHASAK SIRIUS PH 7322 UPS, featuring the LCD display that shows input/output voltage and status icons, and the main power button.

• Pikeun Ngahurungkeun: Press and hold the power button on the front panel for approximately 2 seconds until you hear a beep and the display illuminates.
• Pikeun mareuman: Press and hold the power button for approximately 2 seconds until you hear a beep and the display turns off.

5.2 Émbaran Témbongkeun LCD

The LCD display provides real-time status information about the UPS:

• Masukan Voltage: Némbongkeun vol ayeunatage tina listrik.
• Kaluaran Voltage: Némbongkeun voltage supplied by the UPS to connected equipment.
• Tingkat batré: Nunjukkeun sesa muatan batré.
• Tingkat beban: Némbongkeun persentagkapasitas UPS anu dianggo ku alat-alat anu nyambung.
• Ikon Status: Various icons indicate operational mode (e.g., AC mode, battery mode, AVR active, fault). Refer to the full software manual for detailed icon explanations.

5.3 Otomatis Voltage Peraturan (AVR)

UPS sacara otomatis ngoréksi voltase minortage fluctuations (sags and surges) without switching to battery power, extending battery life and providing stable power to your devices.

5.4 Modeu batré

Salila kakuatan outage, the UPS will automatically switch to battery power. An audible alarm will sound, and the display will indicate battery mode. The alarm will typically sound more frequently as the battery level becomes critically low, signaling that connected equipment should be safely shut down.

6. Pangropéa

• beberesih: Anggo lawon anu garing sareng lemes pikeun ngabersihkeun bagian luar UPS. Entong nganggo pembersih cair atanapi aerosol.
• Perawatan batré: To maintain optimal battery life, ensure the UPS is connected to AC power at all times. If the UPS is stored for an extended period, recharge it every 3 months for at least 8 hours.
• Ngagantian batré: Batteries are not user-replaceable. Contact qualified service personnel for battery replacement.
• Ventilasi: Regularly check that the ventilation openings are clear of dust and obstructions to prevent overheating.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

All PHASAK Uninterruptible Power Systems come with a 2-year "In Situ" warranty. For technical support, warranty claims, or service inquiries, please contact your local Phasak distributor or visit the official Phasak websitus pikeun inpo kontak.

Please have your product model (PH 7322) and purchase information ready when contacting support.