Mackie MDB-USB Signal Direct Box Instruction Manual

1. Bubuka jeung Leuwihview

The Mackie MDB-USB is a bus-powered stereo direct box designed to seamlessly integrate computer audio into analog sound systems. It functions as a high-resolution audio interface, converting digital audio signals into clean, balanced stereo output, free from noise and distortion. This device eliminates the need to rely on a computer's headphone jack for professional audio connections, offering enhanced versatility with features like output level control, a dedicated headphone output, and a mono sum option. The analog outputs are dual XLR with a ground lift switch for optimal signal integrity. A USB cable is included for immediate connectivity.

• Direct USB Connectivity: Connect your computer directly via USB for audio transfer.
• Audio Resolusi Tinggi: Supports 24-bit/96kHz audio for pristine sound quality.
• Balanced XLR Outputs: Provides professional-grade balanced XLR outputs with ground lift.
• Beus-Powered: Operates solely on power supplied by your computer's USB port.

2. Setup jeung Sambungan

Follow these steps to set up your MDB-USB Signal Direct Box:

1. Nyambung ka Komputer: Use the included USB cable to connect the MDB-USB to an available USB port on your computer. The device is bus-powered and does not require an external power supply.
2. Sambungan Kaluaran Audio: Connect the dual XLR outputs (Left and Right) of the MDB-USB to the balanced inputs of your mixer, audio interface, or PA system using standard XLR cables.
3. Pangimeutan Headphone: For direct monitoring, connect your headphones to the dedicated headphone output jack on the MDB-USB.
4. Angkat taneuh: If you experience hum or ground loop noise, engage the Ground Lift switch located between the XLR outputs. This can help eliminate unwanted noise.
5. Konfigurasi Parangkat Lunak: On your computer, select the MDB-USB as the audio output device in your operating system's sound settings and your preferred audio software.

3. Parentah Operasi

The MDB-USB offers straightforward controls for managing your audio signal:

• Kontrol tingkat: Adjust the output level of the MDB-USB using the dedicated knob. This controls the signal sent to your mixer or PA system.
• Volume headphone: A separate volume control is provided for the headphone output, allowing independent monitoring level adjustment.
• Mono Sum Switch: Engage the Mono Sum switch to combine the left and right stereo signals into a single mono output. This is useful for systems that only support mono input or for checking mono compatibility.
• Ground lift switch: As mentioned in the setup, use this switch to break ground loops and eliminate hum. Toggle it to the position that provides the cleanest audio signal.

For a visual demonstration of the Mackie MDB series, including the MDB-USB, refer to the video below:

4. Pangropéa

To ensure the longevity and optimal performance of your Mackie MDB-USB, follow these simple maintenance guidelines:

• beberesih: Use a soft, dry cloth to wipe down the exterior of the unit. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish and internal components.
• Panyimpenan: When not in use, store the MDB-USB in a cool, dry place, away from direct sunlight and extreme temperatures. Protect it from dust and moisture.
• Penanganan: Handle the unit with care. While built robustly, dropping or subjecting it to strong impacts can cause damage.
• Manajemén Kabel: Ensure all cables connected to the MDB-USB are not excessively bent or strained, which can lead to cable failure or damage to the unit's ports.

5. Cara ngungkulan

If you encounter issues with your MDB-USB, consult the following common troubleshooting tips:

• Henteu aya Kaluaran Audio:
  • Ensure the MDB-USB is correctly connected to your computer via USB and recognized as an audio device.
  • Verify that the MDB-USB is selected as the output device in your computer's sound settings and your audio software.
  • Check all cable connections (USB, XLR, headphones) for secure fit.
  • Increase the output level on the MDB-USB and the input gain on your mixer/PA system.
• Sora ngahiung atawa ngagaur:
  • Engage the Ground Lift switch on the MDB-USB.
  • Ensure all audio equipment is connected to the same electrical outlet or power conditioner to avoid ground loops.
  • Test with different cables to rule out faulty wiring.
• Audio distort:
  • Reduce the output level on the MDB-USB or the input gain on your mixer/PA system to prevent clipping.
  • Check your computer's audio output level to ensure it's not too high.
• Headphone teu jalan:
  • Ensure headphones are fully plugged into the headphone jack.
  • Adjust the headphone volume knob on the MDB-USB.
  • Test with another pair of headphones to confirm they are functional.

6. Spésifikasi

7. Garansi jeung Rojongan

Kanggo inpormasi garansi, dukungan téknis, atanapi patarosan jasa, mangga tingal Mackie resmi websitus atanapi ngahubungan rojongan customer maranéhanana langsung. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.