VAXCEL Dorado Outdoor Wall Light with Motion Sensor

Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your VAXCEL Dorado Outdoor Wall Light with Motion Sensor, Model T0387. This fixture is designed for outdoor use, offering enhanced security and convenience with its integrated motion sensor and dusk-to-dawn photocell.

Émbaran Kasalametan

• PERHATOSAN: Pareuman heula daya dina pemutus sirkuit sateuacan ngamimitian pamasangan atanapi ngalaksanakeun pangropéa naon waé.
• Taroskeun ka tukang listrik anu mumpuni upami anjeun henteu yakin kana prosés pamasangan.
• Pastikeun sadaya sambungan kabel aman sareng sasuai sareng kode listrik lokal.
• This product is designed for outdoor, hardwired installation.
• Ulah ngaleuwihan wat maksimumtage dieusian pikeun bohlam.
• Please check your local laws and building codes before installing this product.

Naon dina Box

Buka bungkus eusina sacara saksama sareng pastikeun sadaya barang aya:

• Dorado Outdoor Wall Light Fixture
• ngiuhan
• Pamasangan Hardware
• Instruksi Manual

spésifikasi

Pikeun dimensi lengkep, tingal diagram di handap:

Setup sareng Instalasi

Installation of the VAXCEL Dorado Wall Light requires hardwiring to an existing electrical circuit. It is recommended to have this installed by a qualified electrician.

1. Nyiapkeun pikeun Instalasi: Turn off power at the main circuit breaker to the location where the fixture will be installed.
2. Lokasi Pasang: This fixture is designed for wall mount installation. Ensure the mounting surface is structurally sound. Note that a standard electrical box may require a hole cut into the wall for flush mounting.
3. Pasang Hardware Pasang: Secure the provided mounting hardware to the electrical box in the wall.
4. Sambungan Kawat: Connect the fixture's wires to your household wiring according to local electrical codes. Typically, this involves connecting the black wire (live) to the black wire, the white wire (neutral) to the white wire, and the ground wire to the ground wire. Use appropriate wire connectors.
5. Pasangkeun Perlengkapan: Carefully align the fixture with the mounting hardware and secure it to the wall.
6. Pasang Bulb: Insert one E26 medium base bulb (not included) into the socket. Do not exceed 60 watts.
7. Mulangkeun Daya: Saatos pamasangan réngsé sareng aman, pasang deui daya dina pemutus sirkuit.

Parentah Operasi

The VAXCEL Dorado Wall Light features multiple operational modes for convenience and energy efficiency.

Fitur konci:

• Sénsor gerak: Detects movement within a 180-degree angle and up to 40 feet, automatically turning the light on to full brightness.
• Fotosel Ti Wanci Reup-Ka-Subuh: Automatically turns the light on at dusk and off at dawn, conserving energy during daylight hours.
• Fungsi Timer: Allows selection of continuous bright light illumination for 0, 3, or 6 hours after dusk.
• Dual-Level Brightness: Features an adjustable low-level standby brightness (0-50%) that increases to 100% upon motion detection.

Setélan anu tiasa disaluyukeun:

The fixture offers customizable settings to tailor its operation to your needs. These settings are typically adjusted via internal controls on the fixture itself, or in some models, through a remote control (if included).

• Motion Shut-off Delay: Adjust the duration the light stays on after motion is no longer detected (e.g., 5 seconds to 3 minutes).
• Sensitipitas gerak: Adjust the detection range of the motion sensor (up to 40 feet).
• Early Evening Timer: Set the duration for continuous bright light after dusk (0, 3, or 6 hours) before switching to motion-activated mode or low-level standby.
• Low-Level Standby Brightness: Saluyukeun persentage of brightness (0-50%) for the standby mode when no motion is detected and the light is on after dusk.

Pangropéa

Ngagantian bohlam:

Ensure power is turned off at the circuit breaker before replacing the bulb. Allow the bulb to cool completely before handling. This fixture uses one E26 medium base bulb, up to 60 watts.

beberesih:

To clean the fixture, turn off power at the circuit breaker. Use a soft, damp cloth. Avoid abrasive cleaners or solvents, as they may damage the finish or electrical components. Periodically check for debris accumulation on the motion sensor and photocell to ensure optimal performance.

Pamérésan masalah

• Lampu teu hurung:
  • Pariksa lamun kakuatan hurung di circuit breaker.
  • Pastikeun bohlam dipasang leres sareng henteu kaduruk.
  • Verify that the dusk-to-dawn sensor is not obstructed by light or debris.
  • Check motion sensor sensitivity settings.
• Lampu terus hurung:
  • Ensure the motion sensor is not continuously detecting movement (e.g., from trees, traffic). Adjust sensitivity if necessary.
  • Check the timer settings; if set to 3 or 6 hours, the light will remain on for that duration after dusk.
  • Verify the dusk-to-dawn sensor is functioning correctly and not in a constantly dark environment.
• Sénsor gerak teu ngadeteksi gerakan:
  • Check the motion sensor sensitivity settings and increase if needed.
  • Ensure the sensor lens is clean and free from obstructions.
  • Confirm the sensor's detection range covers the desired area.
• Features not responding as expected:
  • Review the operating instructions carefully to ensure settings are correctly applied.
  • If the fixture has internal adjustment dials or buttons, ensure they are accessible and correctly manipulated.
  • Power cycling the fixture (turning off and on at the breaker) may reset its internal logic.

Garansi sareng Rojongan

This VAXCEL product comes with a Limited Warranty. For specific details regarding the warranty period and coverage, please refer to the documentation included with your purchase or contact VAXCEL customer support.

For technical assistance, replacement parts, or further inquiries, please contact VAXCEL customer support through their official websitus atanapi inpormasi kontak anu disayogikeun sareng produk anjeun.