Buku Panduan Pangguna Freezer Jangkauan TRUE T-19F

1. Bubuka

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your TRUE T-19F Reach-In Freezer. Please read this manual thoroughly before installing or operating the unit and retain it for future reference. The TRUE T-19F is a commercial-grade, single-door upright freezer designed for reliable frozen food storage.

Gambar 1: Hareupeun view of the TRUE T-19F Reach-In Freezer, showcasing its stainless steel exterior and single door with a handle.

2. Émbaran Kasalametan

Always observe basic safety precautions when using this appliance to reduce the risk of fire, electric shock, or injury.

• Kasalametan listrik: Ensure the freezer is connected to a properly grounded 115 Volt, dedicated electrical outlet. Do not use extension cords or adapter plugs.
• Ventilasi: Maintain adequate clearance around the unit for proper ventilation to prevent overheating. Refer to installation guidelines for specific distances.
• Penanganan: The unit is heavy. Use appropriate lifting techniques and equipment during unpacking and placement to avoid injury.
• Bahan anu gampang kaduruk: Ulah nyimpen bahan anu gampang ngabeledug atanapi bahan anu gampang kaduruk di jero atanapi caket freezer.
• Barudak: Keep children away from the appliance. Ensure the door cannot be accidentally closed on a child.

3. Unpacking jeung Instalasi

3.1 Ngabongkar bungkusan

1. Cabut sadaya bahan kemasan kalayan ati-ati, kalebet pita sareng pilem pelindung.
2. Inspect the freezer for any shipping damage. Report any damage immediately to the carrier and your supplier.
3. Remove any internal packing materials and accessories.

3.2 Nempatkeun

• Simpen freezer dina permukaan anu kuat sareng rata anu tiasa nahan beuratna nalika dieusi pinuh.
• Ensure adequate air circulation. Maintain a minimum of 3 inches (7.6 cm) clearance from walls or other equipment on the sides and rear, and 6 inches (15.2 cm) on top.
• Avoid direct sunlight or proximity to heat-generating appliances (e.g., ovens, stoves).

3.3 Pamasangan Caster

The unit comes with free casters for mobility. Install them securely into the designated sockets at the bottom of the freezer. Ensure all casters are locked once the unit is in its final position to prevent accidental movement.

3.4 Sambungan Listrik

Connect the freezer to a dedicated 115 Volt, 60 Hz, single-phase AC power supply with a proper ground. Do not overload the circuit. Allow the unit to stand for at least 2 hours after moving before plugging it in to allow compressor oils to settle.

4. Operasi

4.1 Mimiti Mimiti

After connecting to power, the freezer will begin to cool. Allow the unit to operate empty for several hours (e.g., 4-6 hours) to reach its set temperature before loading with products.

4.2 Kontrol Suhu

The freezer is equipped with a factory-set temperature control. Refer to the control panel for adjustments. Typically, commercial freezers operate at -10°F (-23°C) to 0°F (-18°C). Adjust the thermostat incrementally and allow time for the temperature to stabilize.

4.3 Ngamuat freezer

• Distribute products evenly on the three adjustable vinyl-coated wire shelves.
• Do not block the air vents inside the freezer, as this can impede air circulation and cooling efficiency.
• Avoid overloading shelves beyond their weight capacity.

4.4 Operasi Panto

The single door is self-closing to minimize temperature fluctuations and energy consumption. Ensure the door closes completely after each use. The door is also equipped with locks for security.

Gambar 2: Interior view of the TRUE T-19F freezer, showing the adjustable wire shelves and interior lighting.

5. Pangropéa jeung beberesih

5.1 Ngabersihan Biasa

• Interior: Clean the interior regularly with a mild soap and water solution. Rinse thoroughly and dry. Do not use abrasive cleaners or sharp objects.
• Luar: Lap bagian luar stainless steel ku lawon lemes sareng pembersih anti-abrasif anu dirancang khusus pikeun stainless steel.
• Gaskets panto: Clean door gaskets frequently to ensure a proper seal. Inspect for cracks or tears and replace if damaged.

5.2 Pabersihan Koil Kondensor

The condenser coil should be cleaned regularly (e.g., monthly or quarterly, depending on environment) to maintain optimal performance and energy efficiency. Disconnect power before cleaning. Use a stiff brush or vacuum cleaner to remove dust and debris from the coil fins. A dirty condenser coil can lead to reduced cooling capacity and increased energy consumption.

5.3 Defrosting

This unit features an automatic defrost system. However, if excessive ice buildup occurs, manually defrost the unit by emptying it, disconnecting power, and allowing the ice to melt. Do not use sharp objects to remove ice.

6. Cara ngungkulan

Sateuacan ngahubungan jasa, ulangview masalah umum sareng solusi ieu:

Upami masalahna tetep aya saatos nyobian solusi ieu, hubungi teknisi servis anu mumpuni.

7. Spésifikasi

• merek: BENER
• Ngaran modél: T-19F Reach in Freezer
• Nomer Bagian: 675-215-RT
• Jenis pamasangan: Jalanan
• Kapasitas: 19 Cu. Ft.
• Voltage: 115 volt
• Engsel Pintu: Leres
• Rak: 3, adjustable vinyl coated wire
• warna: pérak
• Sertifikasi: ngahontal

8. Garansi jeung Rojongan

For warranty information, please refer to the separate warranty document provided with your purchase or visit the official TRUE website. For technical support, parts, or service inquiries, please contact TRUE customer service or an authorized service provider. Ensure you have your model number (T-19F) and serial number ready when contacting support.

You can find more information about TRUE products and support at the Toko TRUE di Amazon.