Buku Panduan Pangguna Pangisi Daya Batré Pinter Trident BP1240-3A

1. Bubuka

This manual provides essential information for the safe and efficient operation of your Trident BP1240-3A Smart Battery Charger. Designed for mobile and maritime applications, this charger ensures continuous and optimized battery charging, extending battery life. Please read this manual thoroughly before installation and use.

2. Parentah Kasalametan

• Always disconnect AC power before making or breaking battery connections.
• Ensure adequate ventilation around the charger to prevent overheating.
• Do not expose the charger to rain, moisture, or excessive dust.
• This charger is designed for 12V lead-acid batteries. Do not attempt to charge other battery types unless explicitly supported by the manufacturer.
• Hindarkeun sirkuit pondok tina terminal batré.
• Ngan ukur nganggo carjer pikeun tujuan anu dimaksud.
• Jauhkeun tina jangkauan barudak.

3. Eusi Paket

Pastikeun yén sadaya item aya dina pakét anjeun:

• Trident BP1240-3A Smart Battery Charger
• Temperature Sensor with 1.5m Cable
• Manual pangguna (dokumén ieu)

4. Fitur Produk

• Kaluaran: 12V/40A with 3 independent DC outputs.
• Algoritma ngecas: Canggih 6-stage charging process (Soft start, Main charge, Compensation, Absorption, Floating, Recycling) for optimal battery health.
• Kompensasi Suhu: Automatic temperature regulation function when the external temperature sensor is connected.
• Cooling: Fan with automatic start/stop functionality for efficient cooling.
• Perlindungan: Fully protected with PCB coating, short-circuit protection, reverse polarity protection, over-temperature protection for charger and battery, and over-voltage panyalindungan.
• Desain: IP20 rated, marine design suitable for various applications.

5. Produk Langkungview

Familiarize yourself with the charger's components and indicators.

Gambar 1: Front panel and connection diagram of the Trident BP1240-3A charger.

• Indikator LED: Power, Charging, Charged, Reverse Polarity/Error.
• Saklar DIP: Used for configuring work mode and battery type. Refer to the full technical manual for specific settings.
• Saklar utama: Power ON / OFF switch.
• AC Power Cord Input: Connects to mains power (185-265VAC 50Hz).
• BAT - (Negative): Common negative terminal for all batteries.
• BAT + (Nr.1), BAT + (Nr.2), BAT + (Nr.3): Positive output terminals for connecting up to three separate battery banks.

Gambar 2: Hareupeun view of the Trident BP1240-3A charger, showing LED indicators and general design.

Gambar 3: Included temperature sensor for automatic battery temperature compensation.

6. Setup jeung Instalasi

6.1 Pamasangan

Mount the charger in a dry, well-ventilated area, away from direct sunlight and heat sources. Ensure sufficient space around the unit for airflow, especially around the cooling fins and fan grille. The charger can be mounted horizontally or vertically.

6.2 Connecting Batteries

1. Ensure the charger's main switch is OFF and the AC power cord is disconnected.
2. Connect the negative terminal of your battery bank(s) to the common BAT - terminal on the charger.
3. Connect the positive terminal of your first battery bank to BAT + (Nr.1).
4. If charging additional battery banks, connect their positive terminals to BAT + (Nr.2) and BAT + (Nr.3) respectively.
5. Pastikeun sadaya sambungan aman sareng bebas tina korosi.

6.3 Connecting Temperature Sensor

Connect the provided temperature sensor to the designated port on the charger. Place the sensor on or near one of the batteries being charged to allow for accurate temperature compensation, which optimizes charging voltage dumasar kana suhu batré.

6.4 Nyambungkeun Daya AC

Connect the AC power cord to the charger's AC input. Then, plug the other end into a suitable mains power outlet (185-265VAC 50Hz).

6.5 Konfigurasi Pindah DIP

The DIP switches on the charger's front panel are used to select the charging profile and battery type. Refer to the detailed instructions in the complete technical manual for the correct DIP switch settings for your specific battery type (e.g., Gel, AGM, Flooded).

7. Parentah Operasi

7.1 Powering On

After all connections are made and verified, switch the main power switch on the charger to the 'ON' position. The 'Power' LED should illuminate.

7.2 Prosés Ngecas

The Trident BP1240-3A utilizes a 6-stagalgoritma ngecas:

1. Mimiti lemes: Gently introduces current to deeply discharged batteries.
2. Main Charge (Bulk): Delivers maximum current to rapidly bring the battery to approximately 80% charge. The 'Battery Charging' LED will be active.
3. Santunan: Further charges the battery to a higher voltage to ensure full capacity.
4. nyerep: Charges the battery to 100% by gradually reducing current while maintaining a constant voltage. The 'Battery Charging' LED will remain active.
5. Ngambang: Ngajaga batré dina voltase anu amantage to prevent self-discharge, keeping it fully charged. The 'Battery Charged' LED will illuminate.
6. Daur ulang: Periodically re-applies a higher charge if the battery voltage drops, ensuring optimal long-term maintenance.

7.3 Indikator LED

• LED kakuatan: Indicates the charger is receiving AC power.
• Battery Charging LED: Illuminates during the bulk and absorption stages.
• Battery Charged LED: Illuminates when the battery is fully charged and in float mode.
• Error/Reverse Polarity LED: Illuminates to indicate a fault condition, such as reverse polarity connection or other system errors.

8. Pangropéa

• Regularly inspect all cables and connections for wear, damage, or corrosion.
• Keep the charger's exterior clean and free from dust. Use a soft, dry cloth.
• Ensure the cooling fan and vents are unobstructed.
• Ulah muka carjer casing; euweuh bagian-pamaké-serviceable jero.

9. Cara ngungkulan

• Charger teu hurung: Check AC power connection and mains supply. Ensure the main switch is ON.
• Error LED illuminated:
  • Sabalikna Polaritasna: Disconnect AC power, correct battery connections (positive to positive, negative to negative), then reconnect.
  • Batré Leuwih-Voltage: Charging will not start if battery voltage is above 15.0 VDC. Check battery condition.
  • Charger Over-Temperature: Ensure adequate ventilation. The charger will reduce output power or shut down if it overheats.
  • Battery Over-Temperature: If the connected temperature sensor detects battery temperature above 50°C, the charger will shut down. Allow the battery to cool.
  • Short Circuit at Output: Disconnect AC power, check battery connections for short circuits, then reconnect.
• Batré teu ngecas: Verify all connections, check DIP switch settings for correct battery type, and ensure the battery is not severely damaged.

10. Spésifikasi

11. Asesoris Pilihan

The following accessories are available separately to enhance the functionality of your Trident BP1240-3A charger:

Gambar 4: Optional remote control units (LCD and LED displays) for monitoring charger status.

• RC: LCD Remote Control: Features an LCD screen, displays charging status and system status, includes a 1.5m cable.
• RD: LED Remote Display: Features LED alarms, displays charging status and system status, includes a 1.5m cable.

Note: RC and RD units are optional accessories and must be purchased separately.

12. Émbaran jaminan

For detailed warranty terms and conditions, please refer to the warranty card included with your product or contact Trident customer support directly. Keep your proof of purchase for warranty claims.

13. Rojongan Palanggan

If you encounter any issues or have questions not covered in this manual, please contact Trident customer support. Contact information can typically be found on the manufacturer's websitus atanapi dina bungkusan produk.