Lowrance HOOK2 9" Buku Panduan Pamaké Bracket

1. Bubuka

This manual provides essential information for the proper installation, operation, and maintenance of your Lowrance HOOK2 9" Gimbal Bracket. Please read these instructions carefully before proceeding with installation to ensure correct usage and to prevent damage to the product or associated equipment.

2. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Lowrance HOOK2 9" Gimbal Bracket
• Two (2) Gimbal Knobs with threaded posts
• Four (4) Mounting Screws

The image displays the Lowrance HOOK2 9-inch gimbal bracket, a black U-shaped mounting accessory. It includes two large black thumb screws with metal posts and four smaller silver screws, which are the necessary hardware for installation.

3. Setup jeung Instalasi

The gimbal bracket allows for secure mounting and adjustable viewing angles for your Lowrance HOOK2 9" display unit.

3.1 Pasang bracket

1. Pilih hiji Lokasi: Choose a flat, stable surface on your vessel that provides optimal viewing and access to the display unit, ensuring it is clear of obstructions.
2. Tandaan liang bor: Position the gimbal bracket in the desired location. Use a pencil or marker to mark the four mounting points on the surface through the holes in the bracket's base.
3. Bor Pilot liang: Using an appropriate drill bit size for the provided mounting screws, carefully drill pilot holes at the marked locations. Ensure the depth of the holes does not exceed the screw length.
4. Amankeun kurung: Place the gimbal bracket over the pilot holes and secure it firmly using the four provided mounting screws. Do not overtighten.

3.2 Attaching the Display Unit

1. Sejajarkeun tampilan: Position your Lowrance HOOK2 9" display unit between the arms of the installed gimbal bracket, aligning the mounting holes on the sides of the display with the holes on the bracket arms.
2. Insert Knobs: Insert the threaded posts of the two gimbal knobs through the bracket arms and into the corresponding mounting holes on the display unit.
3. Tighten Knobs: Hand-tighten the gimbal knobs until the display unit is securely held in place but still allows for adjustment.

4. Operasi

Once installed, the gimbal bracket allows for easy adjustment of your display unit's viewsudut ing.

4.1 Nyaluyukeun Viewdina Angle

1. Loosen Knobs: Slightly loosen both gimbal knobs by turning them counter-clockwise. Do not remove them completely.
2. Saluyukeun Sudut: Tilt the display unit to your desired viewsudut ing.
3. Sudut Aman: Hand-tighten both gimbal knobs by turning them clockwise until the display unit is firmly held in the new position. Ensure both knobs are tightened equally to prevent uneven stress on the bracket.

5. Pangropéa

Regular maintenance ensures the longevity and proper function of your gimbal bracket.

• beberesih: Clean the bracket periodically with a soft, damp lawon. Hindarkeun pembersih abrasive atanapi pangleyur anu tiasa ngaruksak finish.
• Pamariksaan: Routinely check all mounting screws and gimbal knobs for tightness. Re-tighten if necessary. Inspect the bracket for any signs of wear, corrosion, or damage.
• Panyimpenan: If the display unit and bracket are removed for storage, store them in a dry, protected environment.

6. Cara ngungkulan

Bagian ieu ngabahas masalah umum anu anjeun tingali.

6.1 Display Unit is Loose or Sways

• Solusi: Ensure both gimbal knobs are fully tightened. If the issue persists, check if the display unit's mounting holes or the bracket's arms are damaged.

6.2 Difficulty Adjusting Angle

• Solusi: Loosen the gimbal knobs slightly more. If the movement is still stiff, inspect for any debris or obstruction in the pivot points. Do not force the adjustment.

7. Spésifikasi

8. Garansi jeung Rojongan

For information regarding product warranty, please refer to the documentation included with your original purchase or visit the official Lowrance website. For technical support or further assistance, please contact Lowrance customer service directly.