Littelfuse FLNR045

Instruksi Manual

Littelfuse FLNR045 FUS 250V T/D Class RK5 45A

1. Bubuka

This manual provides essential information for the safe and effective use of the Littelfuse FLNR045 FUS 250V T/D Class RK5 45A fuse. Please read this manual thoroughly before installation or operation and retain it for future reference. This fuse is designed for use in panel accessories and electrical systems requiring reliable overcurrent protection.

2. Émbaran Kasalametan

PERHATOSAN: Electrical shock hazard. Improper installation or use of this product can result in serious injury or death. Always follow local electrical codes and safety regulations.

3. Pedaran produk na Fitur

The Littelfuse FLNR045 is a 45 Amp, 250 Volt, Class RK5, dual-element, time-delay fuse. It is designed to provide superior protection for motors and other inductive loads against both overloads and short-circuits. Its time-delay characteristic allows for temporary inrush currents without nuisance opening, while still providing fast-acting protection under short-circuit conditions.

Littelfuse FLNR045 Class RK5 Time-Delay Fuse

Figure 3.1: A Littelfuse FLNR045 Class RK5 time-delay fuse. This image shows the cylindrical body of the fuse with the Littelfuse brand and "CLASS RK5 Time Delay Dual Element" visible on its label.

Fitur konci:

4. Setup jeung Instalasi

Installation of the FLNR045 fuse should only be performed by a qualified electrician in accordance with all applicable national and local electrical codes.

  1. Sirkuit De-énergize: Before beginning any work, ensure that the circuit where the fuse is to be installed or replaced is completely de-energized. Verify with a voltage panguji.
  2. Identipikasi Tempat Sekring: Locate the appropriate fuse holder or disconnect switch for the circuit requiring protection.
  3. Selapkeun Sekering: Carefully insert the FLNR045 fuse into the fuse clips or holder, ensuring a secure and proper connection. Do not force the fuse.
  4. Pariksa Pamasangan: Double-check that the fuse is seated correctly and that all connections are tight.
  5. Re-energize Circuit: Sakali pamasangan parantos réngsé sareng diverifikasi, balikkeun kakuatan ka sirkuit.

It is critical to match the fuse's voltage jeung amperage ratings to the circuit's requirements. Using a fuse with an incorrect rating can lead to system failure or hazardous conditions.

5. Prinsip Operasi

The Littelfuse FLNR045 is a current-limiting, time-delay fuse. This means it is designed to:

The time-delay feature is particularly beneficial in circuits with inductive loads that draw high inrush currents upon startup, preventing unnecessary fuse blows and ensuring continuous operation.

6. Pangropéa

Fuses are generally maintenance-free components. However, periodic inspection of the fuse and its holder is recommended as part of routine electrical system maintenance.

7. Cara ngungkulan

If a circuit protected by the FLNR045 fuse loses power, the fuse may have blown due to an overcurrent condition. Follow these steps:

  1. Sirkuit De-énergize: Immediately disconnect power to the affected circuit at the main panel.
  2. Identipikasi Sekring Anu Kabeulit: Carefully remove the fuse (using appropriate tools if necessary) and test it with a multimeter for continuity. A blown fuse will show an open circuit (no continuity).
  3. Investigate Cause: Before replacing the fuse, identify and rectify the cause of the overcurrent. Common causes include:
    • Short-circuit in wiring or equipment.
    • Overloaded circuit (too many devices drawing power).
    • Faulty appliance or motor.
  4. Ganti sekering: Once the fault is cleared, replace the blown fuse with a new Littelfuse FLNR045 fuse. Ensure the replacement fuse has the exact same ratings.
  5. Re-energize and Monitor: Restore power and monitor the circuit for proper operation. If the new fuse blows immediately, there is still an unresolved issue in the circuit that requires professional attention.

Do not repeatedly replace fuses without addressing the underlying problem, as this can lead to serious electrical hazards.

8. Spésifikasi

SpésifikasiNilai
Nomer modélFLNR045
merekLittefuse
Voltage Peunteun250 Volt AC
Amperage Peunteun45 Amps
Kelas sekeringRK5
CiriTime-Delay, Dual-Element
BahanStone (Insulating Body)
minuhanUL Didaptarkeun
KategoriPanel Accessories, Fuse

9. Garansi jeung Rojongan

For information regarding warranty, technical support, or service for your Littelfuse FLNR045 fuse, please contact Littelfuse directly through their official website or customer service channels. Keep your purchase receipt for any warranty claims.

Littelfuse Official Websitus: www.littelfuse.com

Dokumén Patali - FLNR045

Praview Littelfuse JLLN Series Class T Fuses | Fast-Acting, High Interrupting Capacity
Explore Littelfuse JLLN Series Class T fuses, offering compact design, fast-acting overload and short-circuit protection, and high interrupting ratings up to 200,000 AIR. Ideal for drives, inverters, and power supplies. View specifications, ordering information, and dimensions.
Praview Littelfuse P6SMB Series 600W Surface Mount TVS Diodes Datasheet
Datasheet pikeun Littelfuse P6SMB Series 600W Surface Gunung Transient Voltage Suppressor (TVS) Dioda. Ngawengku fitur, kauntungan, ciri listrik, ratings, kurva, parameter soldering, spésifikasi fisik jeung lingkungan, sarta informasi panomeran bagian.
Praview CT Ngahurungkeun Ratio Guide Modifikasi: Littelfuse Téknis Catetan
Diajar kumaha ngarobih rasio péngkolan tina trafo arus Littelfuse (CTs) kalayan catetan téknis ieu, kalebet metode pikeun nambihan sareng ngirangan péngkolan, sareng ex praktis.amples. Ngartos prinsip operasi CT sareng pangaluyuan rasio.
Praview PTS526 Series Microminiature SMT Top Actuated Tactile Switch Datasheet
Datasheet for the Littelfuse PTS526 Series microminiature SMT top-actuated tactile switch. Features a 5.2 x 5.2 mm footprint, variable heights, and multiple actuation forces, suitable for IoT, home automation, and remote control applications. Includes detailed specifications, mechanical characteristics, dimensions, and ordering information.
Praview Ground-Fault Monitoring in Adjustable-Speed Drive Applications | Littelfuse Technical Note
Technical note from Littelfuse on ground-fault monitoring for adjustable-speed drives (VFDs) using SE-700 and EL731 series relays. Covers issues, filtering, recommended settings, and current transformer location for resistance-grounded systems.
Praview Littelfuse 55505 Series Hall Effect Geartooth Speed Sensor Datasheet
Datasheet for the Littelfuse 55505 Series Hall Effect Flange Mount Geartooth Speed Sensor, detailing its features, applications, electrical ratings, and part numbering system for industrial, commercial, and automotive use.