1. Bubuka
This manual provides detailed instructions for the installation, operation, and maintenance of your Vibe Powerbox Micro Mono Amplifier, model POWERBOX400.1M-V7. Please read this manual thoroughly before attempting installation or operation to ensure proper use and to prevent damage to the unit or your vehicle's audio system.
The Vibe Powerbox Micro Mono Amplifier is a compact, high-performance Class D amplifier designed for car audio systems. It delivers up to 400W RMS, making it suitable for powering subwoofers. Its small footprint allows for flexible installation options.
2. Émbaran Kasalametan
- Sok pegatkeun sambungan terminal négatif batré kendaraan sateuacan ngamimitian pagawéan listrik.
- Ensure all wiring is correctly routed and secured to prevent damage from moving parts or sharp edges.
- Use appropriate gauge wiring for power and speaker connections as specified in this manual to prevent overheating and potential fire hazards.
- Ulah dipasang dina ampsimpen di tempat anu kakeunaan sinar panonpoé langsung, panas anu kaleuleuwihi, kalembaban, atanapi lebu.
- Taroskeun pamasang audio mobil profésional upami anjeun henteu yakin ngeunaan bagian mana waé tina prosés pamasangan.
- Operasi anu amplifier at excessively high volumes for prolonged periods can cause hearing damage.
3. Eusi Paket
Pariksa yén sadaya barang aya dina bungkusan sateuacan neraskeun pamasangan:
- Vibe Powerbox Micro Mono Amplifier (POWERBOX400.1M-V7)
- Remote Gain Control Unit
- Kabel Audio RCA
- Mounting Hardware (screws, connectors)
- Manual pamaké
4. Fitur Produk
- Class D Micro Amplifier design for high efficiency and compact size.
- Ultra-compact footprint for easy and discreet installation.
- Output: 1 x 400W RMS at 1 ohm, with a maximum output of 800W.
- Dimensions: 37 x 157 x 82mm (approximately 1.46 x 6.18 x 3.23 inches).
- Compatible with Critical Link Rapid kits for simplified integration.
- Features Deltabox™ Connectivity auto turn-on.
- VIBE Sound Studio™ Active crossovers.
- 1 Ohm Stable operation.
5. Idéntifikasi komponén
5.1 Power and Speaker Terminals
The power input section includes terminals for Ground (GND), Remote Turn-On (REM), and +12V power. The speaker output section provides terminals for connecting your subwoofer.
5.2 Input and Control Panel
This panel features the RCA input jacks for audio signal, a Gain control knob to match the amplifier's input sensitivity to your head unit's output, a dedicated port for the remote gain control, a Bass Boost switch for enhancing low frequencies, and an LPF (Low Pass Filter) control to adjust the upper frequency limit for the subwoofer.
5.3 Remote Gain Control
The remote gain control unit connects to the amplifier via the 'REMOTE' port and allows for convenient adjustment of the subwoofer's output level from the vehicle's cabin.
6. Setup jeung Instalasi
Proper installation is crucial for optimal performance and safety. If you are not confident in your ability to install the amplifier, seek professional assistance.
6.1 Lokasi Pamasangan
Choose a mounting location that is dry, well-ventilated, and away from direct heat sources. The compact size of the Powerbox Micro allows for installation under seats, behind trim panels, or in other discreet locations. Ensure there is sufficient airflow around the amplifier pikeun cooling.
6.2 Sambungan Wiring
Kabel kakuatan:
- Nyambungkeun +12V terminal to the vehicle's positive battery terminal using a suitable gauge power cable (e.g., 8 AWG or 10 AWG). Install an in-line fuse holder within 18 inches (45 cm) of the battery.
- Nyambungkeun GND terminal to a clean, unpainted metal surface on the vehicle's chassis. Ensure a good electrical connection. The ground cable should be of the same gauge as the power cable and as short as possible.
- Nyambungkeun REM (Remote Turn-On) terminal to the remote output of your head unit. This wire signals the amplifier to turn on and off with your stereo. If your head unit lacks a remote output, you can use an accessory wire that turns on with the ignition, or utilize the amplifier's auto-sense feature if applicable.
Kabel Speaker:
- Sambungkeun subwoofer anjeun ka Kaluaran Speaker terminals (+ and -). Ensure correct polarity. This amplifier is 1 Ohm stable, allowing flexibility in subwoofer impedance configurations. Refer to your subwoofer's specifications for optimal impedance matching.
Signal Input (RCA):
- Connect the RCA output from your head unit or signal processor to the INPUT (L/R) RCA jacks on the amppangagung.
Kadali Gain Jauh:
- Plug the remote gain control unit into the dedicated JAUH palabuhan dina amplifier. Route the cable to a convenient location for adjustment.
ISO T Harness / ISOAWK Kit:
- For simplified installation with existing stereo looms, an optional ISOAWK kit (available separately) can be used to make the amplifier compatible with an ISO T harness. This allows for plug-and-play integration for audio signal, power, and ground, potentially eliminating the need for separate battery connections.
7. Operasi
7.1 Mimiti Power-Up
Saatos sadaya sambungan parantos dilakukeun sareng diverifikasi, sambungkeun deui batré kendaraan. Hurungkeun unit sirah anjeun. amplifier's power indicator (PWR) should illuminate green. If the protection indicator (PRT) illuminates red, refer to the troubleshooting section.
7.2 Gain adjustment
The Gain control matches the ampsensitipitas input lifier kana vol kaluarantage of your head unit. To set the gain:
- Hurungkeun amplifier's Gain control to its minimum (MIN) setting.
- Atur volume unit sirah anjeun ka ngeunaan 75-80% tina maksimum na.
- Maénkeun karya musik anu dinamis.
- Lalaunan ningkatkeun teh amplifier's Gain control until you hear distortion, then back it off slightly until the sound is clear.
The remote gain control unit allows for real-time adjustment of the subwoofer level without affecting the main system volume.
7.3 Low Pass Filter (LPF)
The LPF control sets the upper frequency limit for the amplifier's output. This is essential for subwoofers, ensuring they only reproduce low frequencies. Adjust the LPF knob (typically 30Hz to 150Hz) to blend the subwoofer's output seamlessly with your main speakers. A common starting point is around 80-100Hz.
7.4 Bass naekeun
The Bass Boost switch provides an adjustable low-frequency enhancement. Use this feature sparingly, as excessive bass boost can lead to distortion and potential damage to your subwoofer. Adjust the boost level (0dB to 12dB) to your preference.
8. Pangropéa
- beberesih: Ngusap périodik ampexterior lifier urang ku lemes, lawon garing. Ulah make bahan kimia kasar atawa cleaners abrasive.
- Sambungan: Regularly check all power, ground, and speaker connections to ensure they are secure and free from corrosion. Loose connections can cause performance issues or damage.
- Ventilasi: Pastikeun yén amplifier's cooling fins are not obstructed to maintain proper heat dissipation.
9. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya Daya (LED PWR pareum) | Sekring putus, sambungan daya/ground kendor, teu aya sinyal jarak jauh. | Pariksa sekering anu aya dina jaringan, pariksa sambungan +12V, GND, sareng REM. |
| Protection Mode (PRT LED on) | Overheating, short circuit in speaker wiring, impedance too low. | Ensure proper ventilation, check speaker wiring for shorts, verify speaker impedance. |
| Taya Kaluaran Sora | No input signal, gain too low, speaker wires disconnected. | Check RCA input connections, adjust gain, verify speaker wiring. |
| Sora Distort | Gain set too high, LPF incorrectly set, poor ground connection. | Reduce gain, adjust LPF, check ground connection. |
10. Spésifikasi
- Jumlah modél: POWERBOX400.1M-V7
- Amptipe lifier: Kelas D Mono Amppangagung
- Kaluaran Daya RMS: 1 x 400W RMS @ 1 Ohm
- Kaluaran Daya Maksimum: 800W
- Ukuran produk (L x W x H): Kira-kira 157 x 82 x 37 mm (6.18 x 3.23 x 1.46 inci)
- beurat: Kira-kira 1.54 Pon
- Voltage: 12 Volt (Nominal)
- Maksimum Suplai Voltage: 12 volt
- Tipe Pamasangan: Permukaan Gunung
- Pabrikan: Vibe Audio
- Titimangsa munggaran sadia: 21 Juli 2018
11. Garansi jeung Rojongan
Vibe Audio products are designed and manufactured to the highest standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Vibe Audio websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.
