1. Bubuka sarta Produk Leuwihview
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Geko G01025 Electric Diesel/Oil Transfer Pump. This 600W electric pump is designed for transferring diesel fuel and oil. It is characterized by its durability and solid performance, constructed from high-quality materials.
Image: The main Geko G01025 electric pump unit, featuring an integrated flow meter and a sturdy frame for stability during operation.
2. Parentah Kasalametan
Read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.
- Kasalametan listrik: Ensure the power supply matches the pump's specifications (230V, 50Hz). Do not operate the pump with damaged cables or plugs. Always connect to a grounded outlet.
- Kasaluyuan cairan: This pump is designed for diesel and oil transfer only. Do not use with gasoline, alcohol, water, corrosive chemicals, or any other flammable liquids not specified, as this may cause fire or explosion.
- Ventilasi: Operate the pump in a well-ventilated area to prevent the accumulation of hazardous fumes.
- Alat Pelindung Pribadi: Wear appropriate personal protective equipment (PPE) such as gloves and eye protection when handling fuels and oils.
- Pencegahan tumpahan: Always ensure all connections are secure to prevent leaks and spills. Have spill containment materials readily available.
- Barudak sareng Panyusun: Jauhkeun barudak sareng jalma anu henteu sah ti daérah operasi.
- Stopan Darurat: Familiarize yourself with the location and operation of the ON/OFF switch for quick shutdown in emergencies.
3. Eusi Paket
Carefully unpack all components and check against the list below. If any parts are missing or damaged, contact your supplier immediately.
- Geko G01025 Electric Transfer Pump Unit with Integrated Meter
- Suction Hose (Clear, reinforced)
- Discharge Hose (Black)
- Nozzle suluh
- Various Fittings (Brass connectors)
- Selang Clamps
- Seals/Gaskets
Image: An assortment of brass fittings, metal hose clamps, and rubber O-rings, essential for connecting hoses to the pump unit.
Image: A coiled clear, reinforced hose, typically used as the suction line for drawing fluid into the pump.
Image: A coiled black hose, commonly used as the discharge line for delivering fluid from the pump.
Image: A red and black fuel dispensing nozzle, designed for controlled delivery of diesel or oil.
4. Parentah Setup
Follow these steps to correctly assemble and prepare your pump for operation.
- Panempatan Aman: Place the pump unit on a stable, level surface near the fluid source and destination. Ensure adequate ventilation.
- Sambungkeun Selang Nyeuseup: Attach one end of the clear suction hose to the inlet port of the pump. Use appropriate fittings and hose clamps pikeun mastikeun sambungan anu pageuh sareng henteu bocor.
- Sambungkeun Selang Discharge: Attach one end of the black discharge hose to the outlet port of the pump. Secure with fittings and hose clamps.
- Pasang nozzle: Connect the fuel nozzle to the free end of the discharge hose, ensuring a secure connection.
- Submerge Suction End: Place the free end of the suction hose into the fluid source (e.g., diesel tank). Ensure the end is fully submerged and clear of debris.
- Sambungan listrik: Plug the pump's power cord into a suitable, grounded 230V, 50Hz electrical outlet.
Gambar: A close-up view of the pump's threaded inlet or outlet port, where hoses and fittings are connected.
5. Parentah Operasi
Follow these steps for safe and effective fluid transfer.
- Pariksa Pra-Operasi: Before starting, verify all hose connections are tight, the suction hose is properly submerged, and the discharge nozzle is ready at the receiving container.
- Daya Hurung: Locate the ON/OFF switch on the pump's control panel. Flip the switch to the 'ON' (I) position to start the pump.
- Fluid Transfer: The pump will begin to draw fluid from the source and deliver it through the discharge hose and nozzle. Monitor the flow and the integrated meter.
- Monitor Meter: The integrated meter displays the volume of fluid transferred. The 'LITER' display shows the current transfer, while 'TOTAL' shows the cumulative volume.
- Stopping Transfer: Once the desired volume is transferred or the receiving container is full, flip the ON/OFF switch to the 'OFF' (O) position to stop the pump.
- Pasca Operasi: Remove the nozzle from the receiving container. Allow any residual fluid to drain. Disconnect the power supply.
Image: The pump's control panel, featuring a green 'ON' button (I) and a red 'OFF' button (O) for easy operation. A label indicates electrical specifications and model number.
Image: A close-up of the pump's integrated flow meter, showing 'LITER' for current measurement and 'TOTAL' for cumulative volume, along with a warning about non-commercial use.
6. Pangropéa
Pangropéa rutin mastikeun umur panjang sareng kinerja pompa anjeun anu tiasa diandelkeun.
- beberesih: After each use, wipe down the pump and hoses to remove any spills or residue. Do not use harsh chemicals that may damage components.
- Pariksa Selang sareng Sambungan: Periodically check hoses for cracks, wear, or damage. Ensure all fittings and clamps remain tight to prevent leaks. Replace worn components as necessary.
- Filter Inspection: If your suction hose includes a filter, inspect it regularly for blockages and clean or replace as needed to maintain optimal flow.
- Panyimpenan: When not in use, store the pump in a clean, dry, and protected area, away from direct sunlight and extreme temperatures. Ensure all fluid is drained from the pump and hoses before storage.
7. Cara ngungkulan
Tingali tabel di handap pikeun masalah umum sareng solusi poténsialna.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Pompa teu ngamimitian | Taya catu daya kabel listrik ruksak / switch | Pariksa sambungan kakuatan sarta stop kontak Inspect power cord and switch; replace if damaged |
| Aliran handap atanapi teu aya aliran | Selang sedot teu tilelep bocor hawa dina garis nyeuseup Saringan mampet Selang kinked atanapi diblokir | Pastikeun selang sedot tilelep pinuh Check all suction connections for tightness Ngabersihan atawa ngaganti saringan Straighten hoses; clear any blockages |
| Cairan bocor | Sambungan selang leupas selang ruksak atawa segel | Kencangkeun sadaya selang clamps and fittings Inspect hoses and seals; replace damaged parts |
| Meter inaccurate | Hawa dina sistem Kasalahan méter | Ensure no air is being drawn into the pump Kontak rojongan customer pikeun layanan |
8. Spésifikasi
Technical specifications for the Geko G01025 Electric Diesel/Oil Transfer Pump.
| Spésifikasi | Nilai |
|---|---|
| Nomer modél | Geko_G01025 |
| Produsén | Firma Handlowa GEKO |
| Kakuatan | 600 W |
| Voltage | 230V |
| Frékuénsi | 50Hz |
| Laju Ngalir | 3600 l / jam |
| Ukuran Paket | 35 x 35 x 15 cm |
| Beurat | 12 kg |
| ASIN | B07FR4R9LZ |
9. Garansi jeung Rojongan
This product is manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.
