Radial Catapult MINI TX Cat 5 Audio Snake User Manual

Bubuka

The Radial Catapult MINI TX is a compact and robust 4-channel analog audio snake transmitter designed to send balanced audio signals over a standard Cat 5 or Cat 6 Ethernet cable. This device, when paired with a Catapult MINI RX unit (sold separately), provides a convenient and cost-effective solution for transmitting multiple audio channels over long distances, utilizing existing network infrastructure or dedicated Cat cable runs. Its passive design ensures high-fidelity audio transmission without the need for power.

Radial Catapult MINI TX unit, angled view, showing the blue casing and product name.

Figure 1: Radial Catapult MINI TX unit, angled view, highlighting its compact design and branding.

Fitur konci

4-Channel Audio Transmission: Supports four balanced analog audio signals.
Cat 5/6 Connectivity: Utilizes standard Ethernet cables for signal transmission, offering flexibility and cost savings.
Operasi pasip: Requires no external power, simplifying setup and increasing réliabilitas.
Desain kompak sareng awét: Housed in a rugged steel enclosure, suitable for professional use.
XLR and RJ45 Connectors: Standardized connectors for easy integration into existing audio systems.

Parentah Setup

Setting up the Catapult MINI TX is straightforward. Ensure you have a Catapult MINI RX unit and a shielded Cat 5 or Cat 6 Ethernet cable of appropriate length for your application.

Identipikasi komponén: Locate the Catapult MINI TX (transmitter) and Catapult MINI RX (receiver) units. The TX unit typically has female XLR inputs, and the RX unit has male XLR outputs.
Connect Audio Sources to TX: Connect your balanced audio sources (e.g., microphones, preamps, mixing console outputs) to the four female XLR inputs on the Catapult MINI TX unit. Each input corresponds to a specific channel.

Radial Catapult MINI TX with four XLR cables connected, showing the input side.

Figure 2: Catapult MINI TX with four XLR cables connected, illustrating the input setup.

Sambungkeun kabel Ethernet: Connect one end of a shielded Cat 5 or Cat 6 Ethernet cable to the RJ45 connector on the Catapult MINI TX unit.

Tungtung view of Radial Catapult MINI TX showing the RJ45 and XLR connectors.

Gambar 3: Tungtung view of the Catapult MINI TX, highlighting the RJ45 and XLR connector ports.

Connect RX Unit: Connect the other end of the Ethernet cable to the RJ45 connector on the Catapult MINI RX unit.
Connect Audio Destinations from RX: Connect the male XLR outputs of the Catapult MINI RX unit to your audio destinations (e.g., mixing console inputs, audio interface inputs, powered speakers).
Pariksa sambungan: Double-check all cable connections to ensure they are secure and correctly routed.

Parentah Operasi

Once the Catapult MINI TX and RX units are connected, operation is automatic due to their passive design. No power or configuration is required.

Aliran Sinyal: Audio signals from your sources connected to the TX unit's XLR inputs will be transmitted over the Cat 5/6 cable to the RX unit, and then output via its XLR connectors.
Pemetaan Saluran: Each XLR input on the TX unit corresponds directly to an XLR output on the RX unit. Ensure your audio sources and destinations are connected to the correct channels.
Panjang kabel: While Cat 5/6 cables can transmit signals over significant distances, extremely long runs (e.g., hundreds of feet) may introduce slight signal degradation. Test your setup with the intended cable length to ensure optimal performance.
Shielded Cable Requirement: Always use shielded Cat 5 or Cat 6 cable for reliable and noise-free operation. Unshielded cables may introduce interference.

Pangropéa

The Radial Catapult MINI TX is designed for durability and requires minimal maintenance.

beberesih: Anggo kaén anu garing sareng lemes pikeun ngabersihan bagian luar unit. Hindarkeun pembersih abrasive atanapi pangleyur.
Panyimpenan: Store the unit in a dry environment, away from extreme temperatures and direct sunlight, when not in use.
Pamariksaan kabel: Periodically inspect your Cat 5/6 and XLR cables for any signs of wear, damage, or corrosion. Replace damaged cables immediately.
Perawatan Konektor: Keep the XLR and RJ45 connectors free of dust and debris.

Pamérésan masalah

If you encounter issues with your Catapult MINI TX, consider the following troubleshooting steps:

Masalah	Mungkin Cukang lantaranana	Solusi
Taya sinyal audio	Sambungan kabel salah Damaged Cat 5/6 cable Unshielded Cat 5/6 cable Kabel XLR anu rusak Source/destination device issues	Ensure all XLR and RJ45 cables are securely connected. Verify you are using a shielded Cat 5 or Cat 6 cable. Test cables individually with other equipment. Check power and settings of connected audio devices.
Hum or noise in audio	Unshielded Cat 5/6 cable Ground loop issues gangguan éléktromagnétik éksternal	Ensure you are using a shielded Cat 5 or Cat 6 cable. Try isolating power supplies of connected equipment. Route Cat cable away from power lines or strong electromagnetic fields.
Sinyal intermittent	Sambungan kabel leupas Kabel atawa konektor ruksak	Reseat all cables firmly. Inspect cables and connectors for physical damage. Replace if necessary.

spésifikasi

Fitur	Rincian
Modél	R800 8028
Saluran	4 (balanced analog audio)
Connector Type (Audio)	XLR Female (Input)
Connector Type (Data)	RJ45
Kabutuhan Kabutuhan	Shielded Cat 5 or Cat 6 Ethernet cable
Operasi	Passive (no power required)
Ukuran (L x W x H)	6.3 x 4.3 x 3 inci (kira-kira)
Beurat	1.06 pon (kira-kira)
Bahan Pangwangunan	Baja
Warna	Biru

Garansi sareng Rojongan

Radial Engineering products are built to high standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the official Radial Engineering website or contact their customer support directly. For technical assistance, troubleshooting beyond this manual, or service inquiries, please visit the Radial Engineering support page or contact their authorized service centers.

Resmi Websitus: www.radialeng.com

	Radial HotShot MD Stage Pituduh Pamaké Mic Switcher Buku pituduh pikeun Radial HotShot MD, sigatage switcher mikropon dirancang pikeun rerouting sakedapan mikropon dinamis ka sababaraha tujuan, featuring kadali gampang pikeun vokalis jeung komunikasi band.
	Radial J48 Active Direct Box Pamaké Guide Comprehensive user guide for the Radial J48 Active Direct Box, detailing its features, functions, specifications, and warranty information for professional audio applications.
	Radial JDI pasip langsung Box Guide pamaké Buku pituduh komprehensif pikeun kotak langsung pasif Radial JDI, ngajéntrékeun fitur, spésifikasi, aplikasi, sareng ngungkulan na. Diajar ngeunaan trafo Jensen na, impedansi input/output, sareng kumaha carana ngahontal kinerja audio anu optimal.
	Radial Headbone VT Guide pamaké: gitar Amp Ngalihkeun sirah Buku pituduh komprehensif pikeun Radial Headbone VT, alat anu ngamungkinkeun gitaris pindah antara dua tube amphuluna lifier sarta kabinét spiker tunggal jeung kontrol footswitch. Nyertakeun setelan, fitur, kaamanan, sareng ngungkulan masalah.
	Radial Workhorse Powerhouse 500 Runtuyan Rack Guide pamaké Buku pituduh pikeun Radial Workhorse Powerhouse, pigura rak runtuyan 10-slot 500. Rincian fitur, pamasangan, aliran sinyal, catu daya, spésifikasi, sareng inpormasi garansi pikeun insinyur audio profésional.
	Radial LX8 Eight Channel Transformer Isolated Line Splitter User Guide Comprehensive user guide for the Radial LX8, an eight-channel transformer-isolated line splitter designed for professional audio applications. Learn about its features, signal flow, connections, and troubleshooting to achieve professional audio quality and eliminate ground loop noise.

Radial Engineering R800 8028