1. Bubuka
This manual provides essential instructions for the safe operation, setup, and maintenance of your Sky Viper Fury Stunt Drone. Please read this manual thoroughly before operating the drone to ensure proper function and to prevent damage or injury.
2. Naon dina Box
Bungkus sadaya komponén kalayan ati-ati sareng pariksa yén anjeun parantos nampi barang-barang ieu:
- Sky Viper Fury Stunt Drone
- 3.7V 650mAh Lithium Polymer Battery (for drone)
- Controller
- One Set of Extra Blade Guards
- Kabel Ngecas
- 4 Obeng
- Obeng
- Manual Pitunjuk (dokumén ieu)
Image 2.1: Contents of the Sky Viper Fury Stunt Drone package, including the drone, controller, and retail box.
3. Setélan
3.1 Pamasangan Batré sareng Ngecas
- Drone batre: Insert the included 3.7V 650mAh lithium polymer battery into the drone's battery compartment. Ensure it is securely connected.
- Batré Controller: The controller requires 3 AAA batteries (not included). Open the battery compartment on the back of the controller, insert the batteries according to the polarity indicators, and close the compartment.
- Ngeusi batre Drone: Connect the drone's battery to the charging cable, then connect the charging cable to a USB power source. The charging indicator will show the charging status. Allow approximately 60-90 minutes for a full charge.
3.2 Propeller and Blade Guard Installation
The drone comes with pre-installed propellers. If replacement is needed or if you wish to install blade guards:
- Penjaga Blade: Attach the included blade guards to the drone's arms using the provided screws and screwdriver. Ensure they are firmly secured to protect the propellers during flight.
- Ngaganti propeller: If a propeller is damaged, carefully remove it and replace it with a new one from a spare set (if available). Ensure the correct propeller type (A or B) is installed on the corresponding motor.
Gambar 3.1: Deukeut view of the Sky Viper Fury Stunt Drone and its controller, showing details of the drone's structure.
4. Parentah Operasi
4.1 Hurungkeun sareng Pasangkeun
- Turn on the drone by pressing the power button. The LED lights will begin to flash.
- Turn on the controller. The controller's indicator light will flash.
- Move the left joystick (throttle) fully up, then fully down. The drone and controller lights will become solid, indicating successful pairing.
4.2 Kalibrasi
For stable flight, calibrate the drone before each flight or if it drifts. Place the drone on a flat, level surface. Refer to the quick start guide for specific calibration stick commands, typically involving holding both joysticks to a specific corner.
4.3 Kontrol hiber dasar
The Sky Viper Fury Stunt Drone features Surface Scan Technology and improved auto-hover for simplified flight control.
- Launch/Land Button: Press this button for automatic takeoff and landing.
- Joystick Kénca (Throttle/Yaw): Ngatur luhurna (naék/handap) sareng rotasi (kénca/katuhu).
- Joystick Katuhu (Pitch/Roll): Controls forward/backward movement (pitch) and left/right strafing (roll).
Image 4.1: Diagram illustrating the Sky Viper Fury Stunt Drone's features, including 360-degree flips, one-touch stunts, and auto-pilot stages.
4.4 Surface Scan Technology and Auto-Hover
The drone utilizes Surface Scan technology for enhanced stability. A tiny camera sensor on the underside tracks and analyzes surface patterns at nearly 200 times per second. This optical flow process, combined with a built-in barometer, allows the drone to maintain its position and hover with ease, making it simpler to fly in any horizontal direction using a single stick.
Image 4.2: Visual explanation of Surface Scan Optical Ground Tracking, showing how the drone uses a sensor to maintain position hold.
4.5 One-Touch Stunts
The Sky Viper Fury Stunt Drone is capable of performing eight visually impressive one-touch stunts. To activate a stunt, press the dedicated stunt button on the controller and then move the right joystick in the desired direction (e.g., forward for a front flip, left for a barrel roll).
4.6 Dual Flight Modes
The drone offers two flight modes:
- Modeu Normal: Provides stable and forgiving flight characteristics, ideal for beginners and indoor use.
- Modeu Olahraga: Increases responsiveness and speed, suitable for experienced pilots and outdoor flying.
Switch between modes using the 'NORMAL/SPORT' button on the controller.
5. Pangropéa
5.1 Perawatan Baling-baling
- Regularly inspect propellers for cracks, bends, or damage. Replace any damaged propellers immediately to ensure stable flight.
- Ensure propellers are clean and free from debris (hair, dust, grass) that could impede rotation.
5.2 Kamanusaan sarta Studi Batré
- Always use the provided charging cable.
- Ulah ngecas batréna kaleuleuwihi atanapi ngosongkeun batréna sagemblengna.
- Simpen batréna di tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
- Upami nyimpen kanggo waktos anu lami, ngeusi batre dugi ka kapasitas 50%.
5.3 beberesih umum
Use a soft, dry cloth to clean the drone and controller. Avoid using harsh chemicals or solvents. Do not immerse the drone or controller in water.
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Drone teu hurung. | Drone battery is not charged or not connected. | Charge the drone battery fully and ensure it is properly connected. |
| Controller teu hurung. | Controller batteries are dead or incorrectly installed. | Replace AAA batteries in the controller, ensuring correct polarity. |
| Drone teu tiasa dipasangkeun sareng controller. | Pairing sequence not followed correctly. | Ensure both drone and controller are on, then perform the joystick up/down pairing sequence. |
| Drone drifts or flies erratically. | Drone not calibrated; damaged propellers; strong wind (outdoor). | Perform calibration on a flat surface. Inspect and replace damaged propellers. Avoid flying in windy conditions. |
| waktos hiber pondok. | Batré teu dicas pinuh; batré sepuh. | Ensure battery is fully charged. Consider replacing the battery if it's old and capacity has diminished. |
| Stunts not performing correctly. | Insufficient altitude; incorrect button sequence. | Ensure drone has enough altitude (at least 6-10 feet). Press stunt button then immediately move joystick in desired direction. |
7. Spésifikasi
- merek: Viper Langit
- Ngaran modél: Sky Viper FURY Stunt Drone
- Jumlah modél: 18378
- warna: Hideung / Héjo
- Ukuran produk: 13.5 "L x 3" W x 11.5" H
- Beurat barang: 1 pon (16 ons)
- Bahan: palastik
- Batré: 3.7V 650mAh Lithium Polymer (included)
- Batré Controller: 3 AAA (teu kalebet)
- Téknologi konektipitas: Wifi
- Tipe Kontrol: Kadali jauh
- Tingkat Kamampuh: pamula
- Produsén Disarankeun Umur: 12 taun ka luhur
- Téknologi sénsor optik: CMOS (for Surface Scan)
- UPC: 816322019435, 810017183784
- Pabrikan: Skyrocket
- Tanggal paleupasan: 21 Juni 2023
8. Garansi jeung Rojongan
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Sky Viper website. The manufacturer, Skyrocket, typically provides details regarding product warranties and service options.
A digital version of this user manual may also be available for download from the manufacturer's support page or via this direct link: Sky Viper Fury Stunt Drone User Manual (PDF)