Waterdrop WD-FC-06 Stainless Steel Faucet Water Filter Instruction Manual

1. Bubuka

Thank you for choosing the Waterdrop WD-FC-06 Stainless Steel Faucet Water Filter. This system is designed to provide clean, filtered water directly from your kitchen faucet, effectively reducing chlorine, lead, sediment, rust, and fluoride while retaining beneficial minerals. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your filter.

2. Émbaran Kasalametan penting

• TDS Note: This filter system does not reduce Total Dissolved Solids (TDS). TDS refers to inorganic salts and a small amount of organic matter. The filter retains beneficial minerals like calcium and magnesium. If you require a reduction in TDS, please consider a Waterdrop Reverse Osmosis (RO) system.
• This product is designed for use with standard faucets only. It is not compatible with pull-out, hand-held, spray-style faucets, or faucets with sensors. Please verify your faucet type before installation.
• Operating Temperature: 41-100°F (5-38°C). Do not use with water outside this temperature range.
• Operating Working Pressure: 15-100 psi (100-689 kPa).

3. Daptar Bagian

Before beginning installation, please ensure all parts are present and accounted for:

• Water Filter Faucet System (Main Unit)
• Activated Carbon Block Filter (A)
• Filter Top Cover (B)
• Outlet Valve (C)
• Filter Base (D)
• Connector (E)
• Sealing Ring (F)
• Various Adapters (A3, A4, A5, B4) for faucet compatibility

4. Pamasangan

The Waterdrop WD-FC-06 features a drill-free design for easy plug-and-use installation. Follow these steps:

1. Nyiapkeun saringan: Take out the Activated Carbon Block Filter (A) from its packaging.
2. Assemble the Filter Unit: Twist off the Filter Base (D) anticlockwise from the main unit. Keep the water outlet hole of the filter downward and place the Activated Carbon Block Filter (A) onto the Filter Base (D). Then, twist the Filter Base (D) clockwise back onto the main unit.
3. Nyiapkeun keran anjeun: Remove the aerator from your faucet. Choose the correct adapter (A3, A4, A5, or B4) that matches your faucet's threading. For external threaded faucets, connect the Outlet Valve (C) directly to the faucet. For internal threaded faucets, select the appropriate adapter and connect it to the faucet, then connect the Outlet Valve (C) to the adapter. Ensure the washer between the faucet and the system is installed firmly. If the seal ring of the adapter is loose, please install it firmly. If you still cannot connect it properly, contact customer service for assistance.
4. Connect the System: Attach the main filter unit to the Outlet Valve (C).
5. Siram Sistim: Before first use, switch the lever on the Outlet Valve (C) to the level position (pure water mode) and run cold water for 3 minutes. It is normal to observe black water and hear air pushing sounds during this initial flushing due to activated carbon. The water will clear after flushing.

5. Operasi

The Waterdrop WD-FC-06 features a simple lever to switch between filtered and unfiltered water:

• Kéngingkeun cai disaring, switch the lever to the level position.
• Kéngingkeun unfiltered tap water, switch the lever to the downward direction.

6. Pangropéa

Ngagantian Filter

The filter has a capacity of 320 gallons or approximately 3 months of use, whichever comes first. Regular filter replacement is crucial for maintaining optimal filtration performance.

1. To replace the filter, first switch the lever to the downward position (unfiltered water) and turn off the faucet.
2. Twist off the Filter Base (D) anticlockwise.
3. Remove the old Activated Carbon Block Filter (A) and dispose of it properly.
4. Insert a new Activated Carbon Block Filter (A) into the Filter Base (D), ensuring the water outlet hole is downward.
5. Twist the Filter Base (D) clockwise back onto the main unit until secure.
6. Flush the new filter as described in Step 4 of the Installation section.

Replacement filters can be found by searching for "WD-FF-03A".

7. Cara ngungkulan

Cai Bocor

If you experience water leakage at the connecting position between the faucet and the system:

• Ensure the washer is correctly seated and firmly installed between the faucet and the adapter/system.
• It is recommended to use a wrench to assist in tightening the nut on the Outlet Valve (C).
• Consider using Teflon tape on the threads to create a tighter seal and prevent leakage.

8. Spésifikasi

9. Garansi jeung Rojongan

Waterdrop products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your Waterdrop WD-FC-06 Faucet Water Filter, please refer to the official Waterdrop websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun pikeun klaim jaminan.