1. Bubuka
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the ABB MPS3-230/24 Coated Power Supply. This unit is a reliable switch-mode power supply designed for industrial control cabinets, offering a stable 24 VDC output from a 95 to 265 VAC input.
2. Émbaran Kasalametan
Baca sadaya pitunjuk kaamanan kalayan saksama sateuacan dipasang sareng dioperasikeun. Gagal nuturkeun pitunjuk ieu tiasa nyababkeun sengatan listrik, kahuruan, atanapi tatu parah.
- Pamasangan sareng pangropéa kedah dilakukeun ku tanaga anu mumpuni wungkul.
- Pastikeun catu daya dipegatkeun tina vol utamatage saméméh sagala instalasi, wiring, atawa karya pangropéa.
- Ulah mukakeun kandang alat. Henteu aya bagian anu tiasa dilayanan ku pangguna di jero.
- Jaga alat tina kalembaban, lebu, sareng suhu anu ekstrim.
- Pastikeun ventilasi anu pas di sabudeureun unit pikeun nyegah overheating.
3. Produk Langkungview
The ABB MPS3-230/24 is a compact and efficient DIN rail mountable power supply. It features short-circuit and overload protection, ensuring reliable operation in demanding environments.
This image displays the ABB MPS3-230/24 Coated Power Supply from an angled perspective. The top surface shows product information and safety warnings. The front face features input terminals labeled 'INPUT 100-240V~ N L 1 2 3' and output terminals labeled 'OUTPUT 24V=/3A + - 4 5', along with an 'OK' indicator. The device is designed for DIN rail mounting, visible by the mounting mechanism at the bottom. Ventilation grilles are present on the sides.
Fitur konci:
- DIN rail mountable for easy integration into control cabinets.
- Lebar input voltage range: 95 to 265 VAC.
- Stable 24 VDC output with a 3 Amp rating ayeuna.
- Integrated short-circuit and overload protection.
- LED indication for operational status.
- Coated for enhanced durability in industrial settings.
4. Setup jeung Instalasi
4.1. DIN Rail Pamasangan
- Ensure the DIN rail is securely mounted within the control cabinet.
- Position the power supply unit onto the DIN rail, ensuring the mounting clip engages correctly.
- Press the unit firmly until it clicks into place, indicating a secure attachment.
4.2. Sambungan Wiring
Before making any connections, ensure the main power supply is switched off.
- Input Connections (AC): Connect the AC input wires to the terminals labeled 'INPUT 100-240V~ N L 1 2 3'. Ensure correct polarity for Line (L) and Neutral (N). Terminal '3' is typically for protective earth (PE) if applicable.
- Output Connections (DC): Connect the DC load wires to the terminals labeled 'OUTPUT 24V=/3A + - 4 5'. Connect the positive (+) wire to terminal '4' and the negative (-) wire to terminal '5'.
- Use appropriate wire gauges for the current rating (3 Amps) pikeun nyegah overheating.
- Verify all connections are tight and secure to prevent loose contacts.
5. Operasi
Once installed and wired correctly, the power supply is ready for operation.
- Daya Hurung: Switch on the main AC power supply to the unit.
- Indikator LED: The 'OK' LED on the unit will illuminate when the output voltage is within the specified range, indicating normal operation.
- The unit provides a stable 24 VDC output for connected devices.
6. Pangropéa
The ABB MPS3-230/24 power supply is designed for minimal maintenance. However, periodic checks can ensure optimal performance and longevity.
- beberesih: Periodically clean the unit's exterior and ventilation grilles with a soft, dry cloth to prevent dust accumulation. Ensure power is off before cleaning.
- Pariksa sambungan: Unggal taun mariksa sadaya sambungan kabel pikeun tightness jeung tanda maké atawa korosi.
- Kaayaan Lingkungan: Pastikeun lingkungan operasi tetep dina kisaran suhu sareng kalembaban anu ditangtukeun.
7. Cara ngungkulan
If the power supply is not functioning as expected, refer to the following common issues and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Teu aya kaluaran voltage / 'OK' LED off | Taya input voltage; Incorrect wiring; Overload/Short-circuit | Check input power supply; Verify wiring connections; Disconnect load and check for short-circuit. |
| Kaluaran voltage teu stabil | Masukan voltage fluctuations; Overload condition | Pastikeun volum input stabiltage; Reduce load or use a higher-rated power supply. |
| Unit karasa panas teuing | Insufficient ventilation; Ambient temperature too high; Overload | Ensure adequate airflow; Check ambient temperature; Reduce load. |
Upami masalahna tetep saatos nyobian solusi ieu, hubungi tanaga jasa anu mumpuni.
8. Spésifikasi Téknis
| Spésifikasi | Nilai |
|---|---|
| Ngaran modél | MPS3-230/24 |
| Masukan Voltage Rentang | 95 ka 265 VAC |
| Kaluaran Voltage | 24 VDC |
| Kaluaran Peunteun Ayeuna | 3 Amps |
| Kaluaran Wattage | 72 Watt |
| Faktor Bentuk | DIN rel dipasang |
| Ukuran (PxLxT) | 132 x 75 x 71 mm |
| Kisaran Suhu Operasi | 0 to +60 Degrees C |
| Métode Cooling | Hawa |
| Panyalindungan | Short-circuit and overload protected |
| Indikasi | LED (OK) |
| Produsén | BUAH ARA |
9. Garansi jeung Rojongan
9.1. Garansi
ABB products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation or contact your supplier for specific warranty terms and conditions applicable to the MPS3-230/24.
9.2. Rojongan Téknis
For technical assistance, product inquiries, or service requests, please contact your local ABB representative or authorized distributor. Ensure you have the product model number (MPS3-230/24) and any relevant purchase details available when seeking support.
