WAC Lighting Aether 2in Round Light Engine Trim & LED Instruction Manual

1. Bubuka jeung Leuwihview

The WAC Lighting Aether 2in Round Light Engine Trim & LED is a high-performance recessed downlight designed for various indoor and outdoor applications. Its ultra-low profile design allows for installation in tight plenum spaces. This manual provides essential information for the safe installation, operation, and maintenance of your lighting fixture.

Fitur konci:

• Available in Round, Square, Flangeless Invisible, Adjustable, and Wall Wash configurations.
• Designed for use with New Construction Housings: HR-2LED-H13A or HR-2LED-H13AC.
• Pro ultra-handapfile design with a 2.5-inch housing height for 2-inch trims.
• Smooth and continuous dimming capability down to 1% with compatible dimmers (Electronic Low Voltage or 0-10V).
• High-powered, replaceable LED light engine with 2700K color temperature, 90 CRI, and 65,000 rated hours.

2. Émbaran Kasalametan

Mangga baca sareng pahami sadaya pitunjuk sateuacan ngamimitian pamasangan. Gagal nuturkeun pitunjuk ieu tiasa nyababkeun sengatan listrik, kahuruan, atanapi bahaya sanés anu tiasa nyababkeun karusakan harta benda atanapi cilaka pribadi.

• PERHATOSAN: Résiko shock listrik. Pegatkeun sambungan kakuatan dina sekering atawa circuit breaker saméméh masang atawa ngalayanan.
• Sadaya sambungan listrik kedah saluyu sareng kode lokal, peraturan, atanapi Kode Listrik Nasional (NEC). Konsultasi ka tukang listrik anu mumpuni upami anjeun teu wawuh sareng sambungan kabel listrik anu leres.
• Mastikeun suplai voltage bener ku ngabandingkeun éta kalayan informasi labél luminaire.
• Do not install in areas where the operating temperature exceeds the fixture's rated temperature.
• Do not modify the fixture in any way. Any modifications may void the warranty and create safety hazards.
• Produk ieu kedah dipasang ku jalma anu akrab sareng konstruksi sareng operasi produk sareng bahaya anu aya.

3. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Instruksi Manual
• Light fixture (Aether 2in Round Light Engine Trim & LED)
• Pamasangan Hardware

Image 3.1: WAC Lighting Aether 2in Round Light Engine Trim & LED. This image shows the complete recessed lighting trim with its black and white finish, ready for installation.

4. Setup jeung Instalasi

Sateuacan Anjeun Ngawitan:

• Pareuman kakuatan dina pemutus sirkuit atanapi kotak sekering.
• Ensure you have the necessary tools: screwdriver, wire strippers, electrical tape, and safety glasses.
• Confirm that the compatible new construction housing (HR-2LED-H13A or HR-2LED-H13AC) is already installed.

Lengkah-demi-Lengkah Instalasi:

1. Prepare the Housing: Ensure the power to the recessed housing is off. Remove any existing trim or components from the housing.
2. Sambungkeun Wiring: Locate the wiring connector from the LED light engine. Connect it to the corresponding connector inside the recessed housing. Ensure a secure connection.
3. Selapkeun Trim: Carefully push the Aether 2in Round Light Engine Trim into the recessed housing. The spring clips on the trim will engage with the housing to hold it securely in place. Apply gentle, even pressure until the trim is flush with the ceiling surface.
4. Trim Aman: For some installations, additional mounting hardware may be used to further secure the trim. Refer to the specific instructions provided with your housing for details.
5. Mulangkeun Daya: Once the trim is securely installed, restore power at the circuit breaker.
6. Fungsi Uji: Turn on the light switch to verify proper operation and dimming capabilities.

Image 4.1: Dimensional drawing of the WAC Lighting Aether 2in Round Light Engine Trim. This diagram illustrates the physical measurements of the trim, including its 4 1/8 inch overall diameter and 2 5/8 inch aperture, crucial for proper installation planning.

5. Parentah Operasi

Operasi standar:

Once installed and power is restored, the Aether LED trim operates like any standard light fixture. Use your wall switch to turn the light on or off.

Fungsi Dimming:

This fixture is designed for smooth and continuous dimming down to 1% when used with compatible Electronic Low Voltage (ELV) or 0-10V dimmers. Ensure your dimmer switch is compatible with LED lighting and specifically with ELV or 0-10V systems for optimal performance. Refer to your dimmer's instruction manual for specific operating procedures.

6. Pangropéa

The WAC Lighting Aether LED trim requires minimal maintenance.

• beberesih: Pikeun ngabersihkeun alatna, pastikeun listrikna pareum. Anggo lawon anu lemes, garing, atanapi rada garing.amp lawon. Ulah nganggo pembersih atanapi pangleyur anu abrasif, sabab ieu tiasa ngaruksak lapisan atanapi komponén listrik.
• Mesin Lampu LED: The LED light engine is replaceable. If replacement is necessary, ensure power is off and follow the reverse of the installation steps to remove the old engine and install a new, compatible WAC Lighting LED light engine.
• Pamariksaan: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician or WAC Lighting customer support.

7. Cara ngungkulan

If you experience issues with your Aether LED trim, refer to the following common problems and solutions:

8. Spésifikasi Téknis

9. Émbaran jaminan

This WAC Lighting product is covered by a 1477-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use and service. For specific terms, conditions, and claim procedures, please refer to the official WAC Lighting warranty documentation or contact customer support.

10. Rojongan Palanggan

For further assistance, technical support, or warranty inquiries, please visit the official WAC Lighting store or contact their customer service department.

WAC Lighting Store: Visit WAC Lighting on Amazon