1. Bubuka
This manual provides essential information for the safe and efficient operation of your Behringer NX6000D Power Amplifier. Please read it thoroughly before use and retain it for future reference. The NX6000D is a high-performance, ultra-lightweight 6000-Watt Class-D power amplifier with integrated DSP and 24-bit/96 kHz converters, designed for professional audio applications.
2. Parentah Kasalametan penting
- Sumber Daya: Connect the unit only to an AC power outlet of the correct voltage as specified on the rear panel.
- Ventilasi: Pastikeun ventilasi nyukupan. Ulah meungpeuk bukaan ventilasi.
- Cai sareng Uap: Do not expose this appliance to rain or moisture. Do not place objects filled with liquids on the apparatus.
- Palayanan: Rujuk sadayana jasa ka tanaga jasa anu mumpuni. Entong nyobian ngalayanan produk ieu nyalira.
- Kabel: Use only high-quality, shielded cables for all audio connections to prevent interference.
- Grounding: produk ieu kudu grounded.
- beberesih: Ngabersihan ngan ku kaén garing.
3. Setup Guide
3.1 Ngabongkar sareng Inspeksi
Taliti ngabongkar amplifier and inspect it for any signs of damage during transit. If damage is found, contact your dealer immediately.
3.2 Nempatkeun
The NX6000D is designed for rack mounting. Ensure sufficient space around the unit for proper airflow. Avoid placing it near heat sources or in direct sunlight.
3.3 Sambungan
- Sambungan Daya: Sambungkeun kabel daya AC anu disayogikeun ka amplifier's power inlet and then to a suitable grounded power outlet.
- Sambungan Input: Use balanced XLR or 1/4" TRS cables to connect your audio source (mixer, preamplifier) to the INPUT A and INPUT B jacks on the rear panel.
- Konéksi Kaluaran: Connect your loudspeakers to the SPEAKON output connectors (OUTPUT A and OUTPUT B) on the rear panel. Ensure correct polarity and impedance matching. The amplifier supports 4-ohm and 8-ohm loads.
Figure 1: Front panel of the Behringer NX6000D Power Amplifier, showing controls and display.
Gambar 2: Angled view tina Behringer NX6000D Power Amplifier, highlighting its compact design.
4. Parentah Operasi
4.1 Powering on / Pareum
Press the POWER button on the front panel to turn the unit on. The display will illuminate. To power off, press the POWER button again.
4.2 Kadali Panel hareup
- Level Controls (CH A, CH B): Adjust the output level for each channel.
- SIGNAL/LIMIT/PROTECT LEDs: Indicate signal presence, limiting activity, and protection mode.
- Layar LCD: Shows current settings, DSP parameters, and status.
- Tombol SETUP: Accesses the main setup menu.
- PROCESS Button: Accesses DSP processing parameters.
- Tombol Encoder: Navigates menus and adjusts parameter values.
- Tombol EXIT: Returns to the previous menu or main screen.
4.3 DSP Functionality
The integrated DSP allows for advanced audio processing. Press the PROCESS button to enter the DSP menu. Here you can configure:
- Tunda: Adjust signal delay for speaker alignment.
- Kawin silang: Set crossover frequencies and filter types (e.g., Butterworth, Linkwitz-Riley, Bessel) up to 48 dB/octave.
- EQ: Utilize 8 parametric and 2 dynamic equalizer bands for precise frequency shaping.
- Pangolahan Dinamika: Apply compression or limiting to control dynamic range.
- Setélan Kaamanan: Lock settings to prevent unauthorized changes.
Use the Encoder Knob to navigate and adjust parameters. Press the Encoder Knob to confirm selections. Refer to the full digital manual (available on the Behringer website) for detailed DSP operation.
5. Pangropéa
- beberesih: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Ventilasi: Pariksa sacara rutin yén liang ventilasi bersih tina lebu sareng runtah.
- Sambungan kabel: Périodik pariksa sadaya sambungan kabel pikeun pas aman tur tanda maké.
- Panyimpenan: If storing the unit for an extended period, ensure it is in a dry, dust-free environment.
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya kakuatan | Power cord disconnected; faulty outlet; internal fuse. | Check power cord connection; try a different outlet; contact service if fuse is suspected. |
| Taya kaluaran sora | Input/output cables incorrect; level controls too low; protection mode active. | Verify all cable connections; increase level controls; check PROTECT LED (if lit, power cycle unit). |
| Sora distort | Input signal too high; speaker impedance mismatch; faulty speaker. | Reduce input signal level; verify speaker impedance matches ampliifier; test kalawan speaker béda. |
| Unit overheats | Ventilasi tersumbat; beban anu kaleuleuwihi. | Ensure clear airflow around the unit; reduce output level or load. |
7. Spésifikasi Téknis
- Daya kaluaran: 2 x 3000 Watts into 4 Ohms, 2 x 1600 Watts into 8 Ohms
- beurat: Less than 13.2 lbs / 6.0 kg
- Ukuran (L x W x H): Kira-kira 3.7 x 19.02 x 12.44 inci (94 x 483 x 316 mm)
- DSP: High-performance DSP with 24-bit/96 kHz converters
- Keunggulan DSP: Delay, Crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), Dynamics Processing
- Panyambung Input: 2 x XLR/TRS combo jacks
- Panyambung kaluaran: 2 x SpeakON connectors
- Sasayogian tanaga: Ultra-efficient switch-mode power supply
- Cooling: Revolutionary cool-running high-density Class-D technology
- Bahan: logam
- warna: Hideung
8. Garansi jeung Rojongan
For detailed warranty information, please refer to the Behringer warranty program available on their official website. Behringer products are typically covered by a limited warranty against defects in materials and workmanship.
8.1 Rojongan Téknis
If you encounter issues not covered in the troubleshooting section or require further assistance, please visit the official Behringer support website or contact their customer service. You may need your product's serial number for support inquiries.
Resmi Behringer Websitus: www.behringer.com
