Buku Panduan Pangguna Kontroler Nirkabel Surge Switchpad Pro

Bubuka

This manual provides instructions for the Surge Switchpad Pro Wireless Controller, designed for use with the Nintendo Switch. It covers essential information regarding setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience.

Gambar: Hareupeun view of the Surge Switchpad Pro Wireless Controller in blue, with its included USB-C charging cable.

Eusi pakét

• Surge Switchpad Pro Wireless Controller
• Kabel Ngecas USB-C
• Manual pamaké

Fitur Controller

• 6-Axis Motion Control: Compatible with motion-sensing games.
• 4 Macro Buttons: Programmable rear paddle buttons for custom button combos.
• Batré 550mAh anu tiasa dicas deui: Provides up to 12 hours of gameplay.
• Fungsi Turbo: Assign Turbo to any face button or trigger.
• Sambungan nirkabel: Bluetooth connectivity for stable connection up to 25ft.

Image: Diagram highlighting key features of the Surge Switchpad Pro: Bluetooth Connection, Rumble Feedback, and Rechargeable battery.

Disetél

Ngecas Controller

Before initial use, fully charge the controller. Connect the included USB-C cable to the controller's USB-C port and the other end to a USB power source (e.g., Nintendo Switch dock, computer, or USB wall adapter).

Gambar: Underside view of the Surge Switchpad Pro, showing the USB-C charge port located between the R1 and L1 buttons.

The LED player indicators on the front of the controller will illuminate during charging and turn off when fully charged.

Masangkeun sareng Nintendo Switch

1. Tina Menu HOME Nintendo Switch, pilih 'Pangendali'.
2. Pilih 'Robah Cecekelan/Pesenan'.
3. On the Surge Switchpad Pro, press and hold the SYNC button (usually a small button on the top edge or back) for a few seconds until the LED player indicators begin to flash rapidly.
4. Once the controller is successfully paired, the player indicator(s) corresponding to its assigned player number will remain lit.

Parentah Operasi

Kadali dasar

The Surge Switchpad Pro features standard Nintendo Switch controller button layouts, including A/B/X/Y buttons, directional pad, left and right analog sticks, L/R/ZL/ZR shoulder buttons, and Home, Capture, Plus (+), and Minus (-) buttons.

Image: A person holding and using the Surge Switchpad Pro Wireless Controller during gameplay.

Macro Button Programming

The 4 macro buttons (typically located on the rear of the controller) can be programmed to execute a sequence of button presses. Refer to the specific instructions provided with your controller for detailed programming steps, as this may vary slightly.

Turbo Function Activation

To activate Turbo functionality for a button:

1. Pencét jeung tahan tombol Turbo kancing.
2. While holding Turbo, press the desired button (e.g., A, B, X, Y, L, R, ZL, ZR) you wish to assign Turbo functionality to.
3. Release both buttons. The assigned button will now rapidly repeat its input when held down.

To deactivate Turbo for a button, repeat the process. To clear all Turbo settings, press and hold the Turbo button for 5 seconds.

Image: Close-up of the Surge Switchpad Pro showing the four LED player indicators below the Home button.

Pangropéa

beberesih

• Use a soft, dry cloth to wipe the controller.
• Keur kokotor bandel, rada dampen lawon ku cai atawa solusi beberesih hampang. Hindarkeun bahan kimia anu kasar.
• Ulah ngantep cairan asup ka bukaan controller urang.

Panyimpenan

• Nyimpen controller dina tiis, tempat garing jauh ti sinar panonpoé langsung jeung hawa ekstrim.
• Upami nyimpen kanggo waktos anu panjang, pastikeun batréna dieusi sawaréh (sakitar 50%) pikeun manjangkeun umurna.

Pamérésan masalah

Controller Henteu Nyambungkeun / Nyapasangkeun

• Pastikeun controller geus dicas pinuh.
• Verify that the Nintendo Switch is updated to the latest system software.
• Try re-pairing the controller by following the 'Pairing with Nintendo Switch' steps in the Setup section.
• If multiple controllers are paired, try disconnecting other controllers from the Switch settings.
• Balikan deui konsol Nintendo Switch anjeun.

Input Lag atanapi Pemutusan

• Ensure you are within the 25ft wireless range of the Nintendo Switch.
• Minimize interference from other wireless devices (e.g., Wi-Fi routers, microwaves).
• Ensure the controller is fully charged. Low battery can affect wireless performance.

Tombol Teu Ngabales

• Pariksa naha controller parantos dipasangkeun sareng disambungkeun kalayan leres.
• Restart the controller by holding the Home button for 10 seconds, then pressing it again to turn it back on.
• If a specific button is stuck, gently clean around it to remove any debris.

spésifikasi

Garansi sareng Rojongan

Information regarding product warranty and customer support was not available in the provided product data. Please refer to the product packaging or the official Surge websitus kanggo detil garansi sareng inpormasi kontak dukungan.