1. Parentah Kasalametan
Utamakeun kasalametan nalika ngoperasikeun alat-alat listrik. Baca sareng pahami sadaya peringatan sareng pitunjuk kaamanan sateuacan dianggo.
- Nganggo Alat Pelindung Diri (APD): Always wear safety glasses, hearing protection, and suitable gloves. A dust mask is recommended for dusty operations.
- Workpiece Aman: Pastikeun workpiece stabil sarta aman clamped pikeun nyegah gerakan nalika operasi.
- Ngajaga Wewengkon Gawé Bersih: Keep the work area well-lit and free of clutter to prevent accidents.
- Pegatkeun Daya: Always disconnect the angle grinder from the power supply before making any adjustments, changing accessories, or performing maintenance.
- Use Correct Discs: Only use cutting or grinding discs that are rated for the correct speed and diameter (125 mm) for this tool.
- Hindarkeun Overreaching: Ngajaga footing ditangtoskeun jeung kasaimbangan sepanjang waktos.
- Balikan deui panyalindungan: This tool features restart protection. If power is interrupted, the tool will not restart automatically when power is restored. The switch must be manually reset.
2. Produk Langkungview
Komponén
The Einhell Angle Grinder TC-AG 125/1 is designed for versatility in grinding, smoothing, and rust removal tasks.
Gambar 2.1: Leuwihview of the Einhell Angle Grinder TC-AG 125/1, showing its compact design with red and black housing, silver gear head, and auxiliary handle.
- Gagang utama: Dirancang sacara ergonomis pikeun cengkraman anu nyaman.
- Gagang bantu: Can be mounted in two positions for optimal control and ergonomics.
- Konci Spindle: Facilitates quick and easy disc changes.
- Pelindung Cakram: Nyadiakeun panyalindungan salila operasi.
- Metal Gear Head: Robust and flat for flexible applications and durability.
- Saklar on/off: With restart protection feature.
angka 2.2: Tutup-up view of the angle grinder's main body, highlighting the on/off switch and the robust construction of the gear head.
Gambar 2.3: Detil view of the angle grinder's disc attachment area, showing the disc guard and the spindle for mounting cutting or grinding discs.
Fitur konci
- Kuat 800-watt motor pikeun operasi efisien.
- Maximum speed of 11,000 revolutions per minute.
- Robust, flat metal gear head for flexible applications.
- High user safety thanks to disc protection and restart protection.
- Auxiliary handle can be mounted in two different positions for ergonomic use.
- Spindle lock for easy and convenient tool change.
- Suitable for cutting discs with a diameter of 125 mm.
Desain ergonomis pikeun penanganan nyaman.
Features a flat and robust aluminum gear head.
Designed for easy and convenient disc changes.
Compatible with 125 mm diameter cutting discs.
3. Setélan
Ngagantelkeun gagang bantu
- Ensure the angle grinder is unplugged from the power supply.
- The auxiliary handle can be screwed into either of the two threaded holes on the gear head, depending on your preferred working position and hand dominance.
- Tighten the handle securely by hand.
Installing/Changing the Cutting Disc
- Ensure the angle grinder is unplugged from the power supply.
- Pencét jeung tahan tombol konci spindle pikeun nyegah spindle ti puteran.
- Using the provided spanner wrench, loosen and remove the clamping nut (if a disc is already installed).
- Place the backing flange onto the spindle.
- Position the new 125 mm cutting or grinding disc onto the backing flange, ensuring it is centered.
- Screw nu clamping nut back onto the spindle.
- Press the spindle lock button again and tighten the clamping nut firmly with the spanner wrench.
- Release the spindle lock before operating the tool.
4. Parentah Operasi
Ngahurungkeun/Pareuman
- Pikeun Ngahurungkeun: Push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- Pareuman: For continuous operation, press the rear part of the slide switch to release the lock. For momentary operation, simply release the switch.
- Due to the restart protection, if the power supply is interrupted, the tool will not restart automatically. You must manually reset the switch to the OFF position and then back to ON.
Téhnik Ngagiling sareng Motong
Always ensure proper ventilation and wear appropriate safety gear when operating the angle grinder.
Figure 4.1: A user demonstrating the application of the Einhell Angle Grinder for metal cutting, emphasizing the importance of safety glasses and gloves.
- Ngagiling: Hold the angle grinder at an angle of approximately 15-30 degrees to the workpiece. Apply moderate pressure and move the tool evenly across the surface.
- motong: For cutting, hold the angle grinder at a 90-degree angle to the workpiece. Apply light, consistent pressure and allow the disc to do the work. Do not force the tool.
- Spark Direction: Position yourself and the tool so that sparks are directed away from your body and any flammable materials.
- Overloading: Avoid overloading the tool. If the motor slows down significantly, reduce pressure.
- Cooling: Allow the tool to cool down during prolonged use by running it at no load for a short period.
5. Pangropéa
Regular maintenance ensures the longevity and safe operation of your angle grinder. Always disconnect the tool from the power supply before any maintenance.
- beberesih: Regularly clean the ventilation slots to prevent overheating. Use a soft brush or compressed air to remove dust and debris. Do not use water or solvents.
- Pelindung Cakram: Ensure the disc guard is always securely attached and free from damage.
- Sikat Karbon: Check the carbon brushes periodically. If they are worn down, they should be replaced by a qualified technician.
- Kabel listrik: Inspect the power cord for any signs of damage. Do not use the tool if the cord is damaged.
- Panyimpenan: Simpen panggiling sudut di tempat anu garing, aman, sareng teu kahontal ku barudak.
6. Cara ngungkulan
Bagian ieu ngabahas masalah umum anu anjeun tiasa pendak sareng panggiling sudut anjeun.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat henteu ngamimitian | No power supply; Restart protection activated; Damaged power cord/switch | Check power connection; Reset switch (OFF then ON); Inspect cord/switch, seek professional repair if damaged. |
| Sparking kaleuleuwihan dina motor | sikat karbon dipaké; Komutator kotor | Have carbon brushes checked/replaced; Clean commutator (professional service recommended). |
| Alat overheats | Blocked ventilation slots; Overloading; Prolonged use | Clean ventilation slots; Reduce pressure/load; Allow tool to cool down. |
| Disc not spinning freely | Spindle lock engaged; Disc improperly installed; Damaged disc | Release spindle lock; Reinstall disc correctly; Replace damaged disc. |
7. Spésifikasi Téknis
| Spésifikasi | Nilai |
|---|---|
| Modél | TC-AG 125/1 |
| Nomer Bagian | 4430970 |
| Sumber Daya | Kabel Listrik |
| Voltage | 220 V |
| Wattage | 800 W |
| Diaméter piringan | 125 mm |
| Laju No-beban | Nepi ka 11,000 rpm |
| Dimensi produk | 26.5 x 24.2 x 10.2 cm |
| Item Beurat | 1.72 kg |
| Bahan | logam |
| Tingkat Sora | 44 dB |
8. Garansi jeung Rojongan
Einhell products are manufactured with care and undergo strict quality controls. In the unlikely event of a defect, please refer to your purchase documentation for warranty terms and conditions.
For technical support, spare parts, or service inquiries, please contact Einhell customer service or visit the official Einhell website. Keep your proof of purchase handy for any warranty claims.
Einhell UK Websitus: www.einhell.co.uk
