Amico 3 Head LED Security Light with Motion Sensor (Model PD-1711)

1. Bubuka

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Amico 3 Head LED Security Light with Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and adherence to safety guidelines are crucial for optimal performance and user safety.

Émbaran Kasalametan

• Salawasna mareuman kakuatan di circuit breaker saméméh instalasi atawa ngalayanan.
• Pamasangan kedah dilakukeun ku tukang listrik anu mumpuni atanapi jalmi anu wawuh kana konstruksi sareng operasi produk ieu sareng bahaya anu aya hubunganana.
• Pastikeun sadaya sambungan listrik sasuai sareng kodeu lokal sareng ordinances.
• Do not install on surfaces that are not structurally sound.
• Ulah neuteup langsung kana sumber lampu LED nalika hurung.

2. Fitur Produk

The Amico 3 Head LED Security Light is designed for outdoor use, offering adjustable lighting and motion detection capabilities.

• Caang Tinggi & Éfisiensi Énergi: Outputs 40W, 4000 Lumens, 5000K (Daylight White) equivalent to 200W halogen light, reducing electricity consumption.
• Tilu Modeu Cahaya: Features Motion Detection, Dusk-to-Dawn (D2D), and Always-On modes for versatile operation.
• Adjustable Motion Sensor: 180-degree swiveling angle with a detection distance of up to 75 feet.
• Awét & Tahan Cuaca: IP65 waterproof rating protects against rain, sleet, or snow. Constructed with aluminum for excellent heat dissipation and extended lifespan.
• Heads Lampu adjustable: Three independently adjustable light heads allow for broad and customized light coverage.

3. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Amico 3 Head LED Security Light Unit
• Ningkatna Kurung
• Pamasangan screws
• Kawat Kacangan
• EVA Pad (for waterproofing)
• Instruksi Manual

4. Parentah instalasi

Follow these steps for a secure and functional installation. Ensure power is OFF at the circuit breaker before starting.

1. Nyiapkeun Surface Mounting: Ensure the junction box is securely installed and accessible.
2. Pasang Bracket Pasang: Fasten the provided mounting bracket to the existing junction box using the supplied screws. Ensure it is firmly attached.
3. Pass Wires Through EVA Pad: Carefully thread the electrical wires from the light fixture through the center hole of the EVA pad. This pad helps create a waterproof seal.
4. Sambungan Kawat: Connect the wires from the light fixture to the corresponding wires from the junction box using the wire nuts.
   • Green wire (from light) to Green wire (ground from junction box)
   • Black wire (from light) to Black wire (hot from junction box)
   • White wire (from light) to White wire (neutral from junction box)

   Note: Improper wiring may cause the light to be slightly bright even when off.
5. Pasang Lampu Lampu: Align the light fixture with the mounting bracket. Pass the screw through the hole on the light body, align with the hole in the mounting bracket, and tighten securely.
6. Seal the Hole: Block the screw hole with the provided rubber plug to maintain the light's waterproof integrity.
7. Saluyukeun Hulu Lampu sareng Sensor: Adjust the three light heads and the motion sensor to your desired angles for optimal coverage.

Pituduh Pidéo Instalasi

5. Modeu Operasi

The Amico Security Light offers three distinct operating modes, controlled by switches and dials on the motion sensor unit. Refer to the diagram below for control locations.

Setélan Mode:

• Modeu Deteksi Gerak: The light activates when motion is detected within its range and turns off after a set time. Adjust the 'DISTANCE' dial to H (High), M (Medium), or L (Low) for sensitivity, and the 'TIME' dial to 1, 3, or 10 minutes for illumination duration.
• Dusk-to-Dawn (D2D) Mode: The light automatically turns on at dusk and off at dawn. To activate, set the 'DISTANCE' dial to 'D2D' and the 'TIME' dial to your desired duration (1, 3, or 10 minutes). The light will remain on for the set duration after dusk.
• Modeu Salawasna Hurung: For continuous illumination, set the 'DISTANCE' dial to 'D2D' and the 'TIME' dial to 'TEST'. The light will remain on until manually switched off or the settings are changed. This mode can also be controlled by a wall switch.

Operating Modes Video Guide

6. Pangropéa

Regular maintenance ensures the longevity and optimal performance of your security light.

• beberesih: Bersihkeun sirah lampu sareng lénsa sénsor gerakan sacara berkala nganggo lap anu lemesamp lawon. Ulah make cleaners abrasive atawa pangleyur.
• Pamariksaan: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections. Ensure the waterproof seals are intact.
• Faktor Lingkungan: Keep the motion sensor clear of obstructions like tree branches or debris that could interfere with its detection capabilities.

7. Cara ngungkulan

If you encounter issues with your Amico Security Light, refer to the following common problems and solutions:

8. Spésifikasi

9. Émbaran jaminan

The Amico 3 Head LED Security Light (Model PD-1711) comes with a 5-year limited warranty. For specific terms and conditions, please refer to the warranty card included in your product packaging or contact Amico customer support.

10. Rojongan Palanggan

For any questions, technical assistance, or warranty claims, please contact Amico customer support through the official Amico websitus atanapi inpormasi kontak anu disayogikeun dina bungkusan produk anjeun.