Thermex ER80V Combi Electric Water Heater User Manual

1. Bubuka

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Thermex ER80V Combi Electric Water Heater. Please read this manual thoroughly before installation and use, and keep it for future reference.

The Thermex ER80V Combi is a combined hot water tank with an integrated heat exchanger and an electric heating element. It is designed for efficient use with alternative energy sources, such as central heating systems, gas and fuel boilers, heat pumps, or solar panels.

2. Émbaran Kasalametan

Pitunjuk Kasalametan Penting:

• Installation and maintenance must be performed by qualified personnel in accordance with local regulations and this manual.
• Ensure the power supply matches the specifications of the water heater (230V, 6 Amps).
• Ulah ngoperasikeun manaskeun cai lamun ruksak atawa malfunctioning.
• Always disconnect power before performing any maintenance or repairs.
• The water heater must be properly grounded.
• Ulah meungpeuk klep relief tekanan.
• Jauhkeun bahan anu gampang kaduruk tina manaskeun cai.
• Alat ieu henteu dimaksudkeun pikeun dianggo ku jalma (kalebet murangkalih) anu ngirangan kamampuan fisik, indrawi atanapi mental, atanapi kirang pangalaman sareng pangaweruh, kecuali aranjeunna dipasihan pangawasan atanapi petunjuk ngeunaan panggunaan alat ku jalma anu tanggung jawab kana kasalametanana.

3. Produk Langkungview

The Thermex ER80V Combi water heater features a robust design for reliable hot water supply. Key components include:

• Tangki 80 Liter: Nyadiakeun ampkapasitas cai panas.
• Integrated Heat Exchanger: Allows connection to external heating sources for energy efficiency.
• Elemen pemanasan listrik: For independent electric heating.
• Bio-Glassline Coating: Applied to the inner tank and heat exchanger for maximum corrosion protection.
• Anode Protection: Extends the lifespan of the heating element.
• Double Safety Thermostat: Controls internal heating and temperature adjustment.
• External Heating Connections: Located on the right side for easy integration.

Gambar 1: Internal view of the Thermex ER80V Combi water heater, illustrating the integrated heat exchanger coil and electric heating element.

4. Setup jeung Instalasi

The Thermex ER80V Combi water heater is designed for vertical wall mounting. Wall anchors are not included and must be sourced separately.

4.1 Ngabongkar bungkusan

Carefully remove the water heater from its packaging. Inspect for any damage during transit. The package includes the water heater unit, a 3-way safety valve (pressure reducing, non-return, and purge valve combined), and a power cable.

4.2 Pamasangan

1. Choose a suitable vertical wall location capable of supporting the full weight of the water heater when filled (approx. 80 kg + unit weight).
2. Mark the drilling points for the wall anchors according to the unit's dimensions (445 x 459 x 771 mm).
3. Securely mount the water heater to the wall using appropriate anchors.

4.3 Panyambungan Plumbing

• Connect the cold water inlet and hot water outlet to the 1/2 inch connections on the unit.
• Install the provided 3-way safety valve on the cold water inlet. Ensure proper drainage for the purge valve.
• Connect the external heating source (e.g., central heating, solar panels) to the 1/2 inch heat exchanger connections located on the right side of the unit.
• Pastikeun sadaya sambungan anu watertight.

4.4 Sambungan Listrik

• Connect the power cable to a grounded 230V, 6 Amp suplai listrik.
• Ensure the electrical installation complies with all local electrical codes.

5. Parentah Operasi

5.1 Mimiti ngamimitian

1. Before switching on, ensure the water heater is completely filled with water. Open a hot water tap to allow air to escape until water flows steadily.
2. Once filled, connect the power supply.

5.2 adjustment hawa

The internal heating is controlled by a double safety thermostat and a temperature adjustment knob. Use the knob to set your desired water temperature.

5.3 Using the Heat Exchanger

The integrated heat exchanger allows the water to be heated by an external source. When the external heating system is active, the electric heating element can be switched off to save energy. This is particularly useful with solar panels during summer months.

5.4 Pemanasan listrik

If no external heat source is available or sufficient, the electric heating element can be activated to heat the water. The electric heating element can also be switched on and off independently.

6. Pangropéa

Pangropéa rutin ngajamin umur panjang sareng operasi efisien tina manaskeun cai anjeun.

• Anode Inspection/Replacement: The heating element is protected by an anode. This anode should be inspected annually and replaced as needed by a qualified technician to prevent corrosion.
• Pamariksaan Katup Kasalametan: Periodically check the 3-way safety valve for proper operation. Follow the manufacturer's instructions for testing.
• beberesih: Ngabersihan bagian luar unit nganggo iklanamp lawon. Ulah make cleaners abrasive.
• Turun: In areas with hard water, descaling of the tank and heating elements may be required periodically. This should be performed by a qualified professional.

7. Cara ngungkulan

For issues not listed or if solutions do not resolve the problem, please contact qualified service personnel.

8. Spésifikasi

Figure 2: Energy efficiency label for the Thermex ER80V Combi, indicating Class C efficiency.

9. Garansi jeung Rojongan

Specific warranty terms and conditions are typically provided with the product documentation at the time of purchase. Please refer to your purchase receipt and the included warranty card for detailed information regarding coverage and duration.

For technical support, service, or spare parts, please contact your local Thermex dealer or authorized service center. Ensure you have your product model number (ER80V Combi) and purchase details available when contacting support.