CTEK 56-108

CTEK XS 7000

Manual pamaké

Bubuka

The CTEK XS 7000 is an advanced, fully automatic 7-step battery charger designed for optimal charging and maintenance of 12V lead-acid batteries. This charger is suitable for a wide range of battery sizes, from 14Ah up to 150Ah for charging, and up to 225Ah for maintenance charging. Its user-friendly design allows for a simple plug-and-forget operation, ensuring your battery is always in peak condition.

Fitur konci

  • Fully Automatic 7-Step Charging: Ensures optimal battery performance and longevity.
  • Patented Desulphation Function: Helps to restore sulphated batteries.
  • Automatic Battery Diagnosis: Determines if the battery can receive and hold a charge.
  • Tampilan LED anu gampang dibaca: Provides clear indication of the charging process.
  • Operasi Aman: Spark-free, reverse polarity protected, and short-circuit proof.
  • Desain awét: Splash and dustproof (IP65 rated) for various environments.
  • Patented Maintenance Charge: Extends battery life for long-term storage.

Eusi pakét

Upon unboxing your CTEK XS 7000, please ensure all the following components are present:

  • CTEK XS 7000 Battery Charger Unit
  • Connection Cables with Eyelet Connectors
  • Connection Cables with Clamp Connectors (High Quality Clips)
CTEK XS 7000 charger accessories including eyelet and clamp panyambungna

Image: Included accessories for the CTEK XS 7000, showing both the eyelet and clamp kabel panyambungna.

Setup sareng Sambungan

Follow these steps to safely set up and connect your CTEK XS 7000 battery charger:

  1. Nyiapkeun batré: Ensure the battery terminals are clean and free from corrosion.
  2. Nyambung ka Batré: Choose the appropriate connection cables (eyelet or clamp). Connect the red (+) cable to the positive battery terminal and the black (-) cable to the negative battery terminal. Ensure a secure connection.
  3. Connect to Mains Power: Plug the charger's power cord into a suitable wall outlet.
  4. Mimitian Ngecas: The charger will automatically begin its diagnostic and charging process. There is no need to press a mode button.
CTEK XS 7000 charger connected to a battery with clamp panyambungna

Image: The CTEK XS 7000 charger connected to a battery using the provided clamp panyambungna.

Parentah Operasi

The CTEK XS 7000 operates as a fully automatic 7-step charger. Once connected, it will proceed through the following stages:

  • Step 1: Desulphation: Detects sulphated batteries and applies a pulsed voltage to remove sulphate from the lead plates, restoring battery capacity.
  • Step 2: Soft Start: Tests if the battery can accept charge. This step prevents charging a defective battery.
  • Step 3: Bulk: ngecas utama stage where 80% of the charge is delivered. The charger delivers maximum current until the battery voltage reaches a set level.
  • Step 4: Absorption: Completes the charge up to 100%. The current decreases as the battery voltage reaches its maximum.
  • Step 5: Analyze: Tests if the battery can hold charge. If the battery voltage drops, the charger will restart the charging cycle.
  • Step 6: Recond (Recondition): This step is for deeply discharged batteries. It mixes the battery acid and restores the battery capacity. (Note: The XS 7000 does not have a manual Recond mode, it's part of the automatic process if needed).
  • Step 7: Float: Maintains the battery at maximum charge by providing a constant voltage muatan.
  • Step 8: Pulse (Maintenance Charging): Maintains the battery at 95–100% capacity. The charger monitors the battery voltage and gives a pulse when needed.

The clear LED display on the charger indicates the current charging stage and battery status. If the charger detects an issue, such as reverse polarity, an error indicator will light up.

Ti luhur ka handap view of the CTEK XS 7000 battery charger with LED indicators and reset button

Gambar: Top view of the CTEK XS 7000, showing the LED indicators for charging stages and the 'RESET' button.

Tombol RESET: If an error occurs or you wish to restart the charging process, press the 'RESET' button on the charger.

Pangropéa

The CTEK XS 7000 is designed for durability and minimal maintenance. Its IP65 rating means it is splash and dustproof. To ensure optimal performance and longevity:

  • Keep the charger clean and free from excessive dust or debris.
  • Store the charger in a dry, well-ventilated area when not in use.
  • Inspect cables and connectors periodically for any signs of damage or wear. Replace if necessary.
  • Ulah neuleumkeun carjer dina cai.

Pamérésan masalah

If you encounter issues with your CTEK XS 7000, refer to the following common problems and solutions:

MasalahMungkin Cukang lantarananaSolusi
Charger does not start / No LEDs light upNo mains power; Poor battery connection; Battery voltage handap teuing.Check wall outlet and power cord. Ensure secure connection to battery terminals. The charger requires a minimum battery voltage (typically 2V) to start.
Kasalahan LED hurungReverse polarity connection; Short circuit; Battery fault.Disconnect from mains and battery. Reconnect ensuring correct polarity (+ to +, - to -). Check for any short circuits in the cables. If the error persists, the battery may be faulty.
Ngecas butuh lila teuingBattery is very large or deeply discharged; Battery is old/damaged.This is normal for large or deeply discharged batteries. If excessively long, the battery may be nearing end-of-life.
Charger gets warmOperasi normal.It is normal for the charger to get warm during the bulk charging phase. Ensure adequate ventilation around the unit.

If the problem persists after trying these solutions, please contact CTEK customer support.

spésifikasi

FiturSpésifikasi
merekCTEK
Ngaran modélCTEK XS 7000
Nomer modél56-108
Kaluaran Voltage12 volt
Peunteun ayeuna7 Amps
Kapasitas Batré (Ngecas)14-150 ah
Kapasitas Batré (Pangropéa)Nepi ka 225 Ah
Kelas panyalindunganIP65 (Tahan cipratan sareng Lebu)
Dimensi (Pakét)25.9 x 18.6 x 5.7 cm
Beurat960 g
Fitur KasalametanSpark-free, Reverse Polarity Protected, Short Circuit Proof
Spesifikasi MetÉnergi Star

Garansi sareng Rojongan

For warranty information and technical support, please refer to the official CTEK websitus atanapi ngahubungan pangecér Anjeun. Simpen bukti pameseran anjeun pikeun klaim garansi.

CTEK Official Websitus: www.ctek.com

Dokumén Patali - 56-108

Praview CTEK MXS 5.0 Batré Charger Pamaké Manual
Comprehensive user manual for the CTEK MXS 5.0 (1090) 12V battery charger, covering safety instructions, operating procedures, charging programs, technical specifications, and warranty information.
Praview CTEK kanyamanan Sambungkeun Charger Batre Manual Pamaké
Manual pamaké komprehensif pikeun carjer batré CTEK Comfort Connect, detailing mode ngecas, parentah sambungan, precautions kaamanan, sarta spésifikasi teknis.
Praview CTEK D250SE & SMARTPASS 120S Dual Battery System User Manual
Comprehensive user manual for CTEK D250SE and SMARTPASS 120S dual battery chargers, covering installation, functions, safety, troubleshooting, and technical specifications for optimal battery management in vehicles and boats.
Praview CTEK PRO25S Acculader Gebruikershandleiding
Gedetailleerde gebruikershandleiding voor de CTEK PRO25S acculader. Leer pasea u loodzuur- en lithiumaccu's veilig en efficient oplaadt patepung de geavanceerde technologie van CTEK SWEDEN AB.
Praview CTEK MULTI AS 7002 Panungtun ngungkulan | Masalah Carjer Batré
Pituduh ngungkulan komprehensif pikeun carjer batré CTEK MULTI US 7002, detil masalah umum indikator LED, katerangan, jeung tés dianjurkeun pikeun ngabéréskeun masalah.
Praview Instruksi Obslugi CTEK XS 0.8: Ngarojong Akumulator
Szczegółowa instrukcja obsługi jeung spésifik téknik akumulator CTEK XS 0.8. Inpormasi ngeunaan program ładowania, podłączaniu, bezpieczeństwie sareng pomocy technicznej.