TOTAL Compact Brushless Cordless Impact Drill

1. Bubuka

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your TOTAL Compact Brushless Cordless Impact Drill, Model TIDLI20668. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.

The TOTAL Compact Brushless Cordless Impact Drill 20V is designed for both DIY enthusiasts and professionals. It features a high-efficiency brushless motor for enhanced performance and durability, making it suitable for a variety of drilling and driving tasks.

2. Émbaran Kasalametan

Salawasna merhatikeun precautions kaamanan dasar pikeun ngurangan résiko seuneu, shock listrik, sarta tatu pribadi. Simpen manual ieu pikeun rujukan ka hareup.

Peringatan Kasalametan Alat Daya Umum

• Kasalametan Area Gawé: Jaga tempat damel anjeun tetep bersih sareng caang. Tempat anu rame atanapi poék tiasa nyababkeun kacilakaan. Ulah ngoperasikeun alat-alat listrik dina atmosfir anu gampang ngabeledug, sapertos nalika aya cairan, gas, atanapi lebu anu gampang kabeuleum.
• Kasalametan listrik: Ulah ngalaan alat listrik ka hujan atawa kaayaan baseuh. Cai asup kana alat listrik bakal ningkatkeun résiko shock listrik.
• Kasalametan Pribadi: Salawasna maké panyalindungan panon. Paké panyalindungan dédéngéan nalika operasi pikeun période nambahan. Pakéan anu leres; ulah maké pakéan atawa perhiasan longgar. Jauhkeun rambut, pakean, sareng sarung tangan tina bagian anu obah.
• Pamakéan sareng Perawatan Alat: Ulah maksakeun alat kakuatan. Anggo alat kakuatan anu leres pikeun aplikasi anjeun. Pegatkeun sambungan batré tina alat kakuatan samemeh nyieun sagala pangaluyuan, ngaganti asesoris, atawa nyimpen parabot kakuatan.
• Paké Batré jeung Perawatan: Ngecas ngan ukur nganggo carjer anu ditangtukeun ku produsén. Ulah nganggo bungkus batré sareng alat-alat listrik anu henteu dirancang pikeun éta.

3. Eusi Paket

Carefully unpack your TOTAL Compact Brushless Cordless Impact Drill and check for the following items. If any items are missing or damaged, please contact your retailer.

• 1 x TOTAL Compact Brushless Cordless Impact Drill (TIDLI20668)
• 2 x 2.0Ah Battery Packs (TFBLI20011)
• 1 x Charger (TFCLI2001)
• 3 x Masonry Drill Bits
• 47 x Accessories (various bits and fasteners)
• 1 x Convenient Carrying Case

Figure 3.1: Complete kit contents, including the drill, batteries, charger, and accessories, neatly organized within the carrying case.

4. Produk Langkungview

Familiarize yourself with the main components of your impact drill.

Gambar 4.1: Leuwihview of the TOTAL Compact Brushless Cordless Impact Drill and included accessories.

• Cék: Holds drill bits and other accessories. Features a 13mm capacity metal chuck.
• Cincin Pangaluyuan Torsi: Ngidinan pilihan 22 + 1 torsi setélan pikeun sagala rupa aplikasi.
• Pamilih Mode: Switches between drilling, driving, and impact drilling modes.
• Switch Pamilih Speed: Controls high and low-speed ranges (0-500/0-2000rpm).
• Saklar pemicu: Aktipkeun bor jeung ngadalikeun speed variabel.
• Saklar Maju/Mundur: Ngarobah arah rotasi.
• Lampu Gawé LED: Illuminates wewengkon gawé.
• Indikator Daya Batré LED: Mintonkeun sésana batré.
• Paket batré: Removable 20V 2.0Ah Lithium-Ion battery.

Figure 4.2: Detail of the chuck and torque settings.

5. Setélan

5.1 Ngecas Batré

The battery packs are not fully charged upon purchase. It is recommended to fully charge them before first use.

1. Connect the charger (TFCLI2001) to a standard power outlet.
2. Slide the battery pack (TFBLI20011) onto the charger until it clicks into place.
3. The charger's indicator light will show the charging status. Refer to the charger's manual for specific light indications.
4. Once fully charged, disconnect the battery pack from the charger and unplug the charger from the outlet.

5.2 Masang jeung Cabut Batre Pack

• Pikeun Pasang: Sejajarkeun pak batré jeung dasar cecekelan bor tur geser kana nepi ka clicks aman kana tempatna.
• Pikeun ngahapus: Press the battery release button (usually located on the front or sides of the battery pack) and slide the battery pack out of the drill.

5.3 Masang jeung Cabut Bor Bits/Asesoris

• Pikeun Pasang: Puterkeun cuk counter-jarum jam pikeun muka rahang. Selapkeun bit bor atawa aksésori kana cuk nu sajauh eta bakal balik. Puter cuk saarah jarum jam pikeun tighten rahang pageuh sabudeureun bit. Pastikeun bit dipuseurkeun tur aman.
• Pikeun ngahapus: Puterkeun chuck ka arah sabalikna jarum jam pikeun ngaleupaskeun rahangna teras tarik mata borna kaluar.

6. Parentah Operasi

6.1 Ngahurungkeun / Pareum sareng Kontrol Speed ​​Variabel

The drill is activated by pressing the trigger switch. The speed is variable depending on how far the trigger is depressed. Releasing the trigger turns the drill off.

6.2 Nyaluyukeun Setélan Speed

The drill has two speed settings (0-500rpm and 0-2000rpm) controlled by the speed selector switch located on top of the drill. Use the low speed for high torque applications (e.g., driving screws, drilling large holes) and the high speed for faster drilling with smaller bits.

6.3 Nyaluyukeun Setélan Torsi

The torque adjustment ring allows you to select from 22+1 torque settings. Rotate the ring to the desired setting. Lower settings are for driving small screws or working with soft materials, while higher settings are for larger screws or harder materials. The 'drill' symbol setting bypasses the clutch for maximum torque, suitable for drilling.

6.4 Using the Impact Function

For drilling into masonry or concrete, select the 'impact drill' mode using the mode selector. This engages the hammer mechanism, providing rapid impacts to assist in drilling hard materials.

6.5 Lampu Gawé LED sareng Indikator Batré

The integrated LED work light illuminates your workspace when the trigger is pressed. The LED battery power indicator on the battery pack shows the remaining charge level, helping you manage your work time effectively.

Figure 6.1: Proper use of the drill for wall applications.

7. Pangropéa

Pangropéa rutin mastikeun umur panjang sareng kinerja bor anjeun anu optimal.

7.1 beberesih

• Tetep bukaan ventilasi alat bersih pikeun nyegah overheating.
• Ngusap perumahan alat ku lemes, damp lawon. Ulah make bahan kimia kasar atawa cleaners abrasive.
• Ngabersihan rahang cuk sacara teratur pikeun mastikeun cengkraman anu pas dina bit.

7.2 Panyimpenan

Store the drill and its accessories in the provided carrying case in a dry, cool place, away from direct sunlight and moisture. Ensure the battery is removed from the drill before storage.

7.3 Perawatan Batré

• Ulah nyimpen batré dina kaayaan kosong. Cas deui sacara rutin, khususna upami henteu dianggo kanggo waktos anu lami.
• Ulah nepi ka pak batré kakeunaan suhu anu ekstrim.
• Only use the TOTAL charger provided for recharging.

8. Cara ngungkulan

Bagian ieu ngabahas masalah umum anu anjeun tingali. Pikeun masalah teu didaptarkeun di dieu, kontak rojongan customer.

9. Spésifikasi

Key technical specifications for the TOTAL Compact Brushless Cordless Impact Drill TIDLI20668:

10. Garansi jeung Rojongan

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official TOTAL websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.