Paku Listrik Saeyang Marathon Handy 700 File Manual pamaké

Bubuka

Thank you for choosing the Saeyang Marathon Handy 700 Electric Nail File. This professional-grade machine is designed for efficient and precise manicure and pedicure applications, suitable for both salon professionals and aspiring technicians. Please read this manual thoroughly before operating the device to ensure safe and optimal performance.

The Marathon Handy 700 offers advanced features such as a powerful 50,000 RPM motor, 100W drilling power, and a convenient foot pedal for hands-free operation. Its hermetically sealed handpiece design ensures reduced noise during use, providing a more comfortable experience for both the operator and clients.

Figure 1: Saeyang Marathon Handy 700 Electric Nail File, showing the main control unit, the foot pedal for speed control, and the handpiece with its dedicated stand.

Parentah Kasalametan penting

• Salawasna pegatkeun sambungan kabel listrik saméméh meresihan atawa ngalakukeun pangropéa.
• Ulah ngoperasikeun alat ieu dina leungeun baseuh atanapi caket cai.
• Jauhkeun alat tina sumber panas sareng sinar panonpoé langsung.
• Use only original Saeyang accessories and replacement parts.
• Pastikeun ventilasi ditangtoskeun salila operasi.
• Ulah nyobian ngabongkar atanapi ngalereskeun unit nyalira. Hubungi petugas servis anu mumpuni.
• Jauhkeun tina jangkauan barudak.

Komponén produk

The Saeyang Marathon Handy 700 system includes the following main components:

• Unit Kontrol Utama
• Handpiece (Micromotor)
• Pedal suku
• Nangtung Handpiece
• Kabel listrik

Gambar 2: Leuwihview of all components included with the Saeyang Marathon Handy 700 system, showing the main unit, handpiece, foot pedal, and handpiece stand.

Parentah Setup

1. Ngabongkar bungkusan: Sacara saksama miceun sadaya komponén tina bungkusan. Mariksa karusakan naon waé.
2. panempatan: Place the main control unit on a stable, flat, and dry surface. Ensure there is adequate ventilation around the unit.
3. Sambungkeun Handpiece: Connect the handpiece cable to the "MOTOR A" or "MOTOR B" port on the back of the main control unit. Ensure the connection is secure.
   

   Figure 3: Rear panel of the control unit, highlighting the connection ports for the handpiece (Motor A/B) and the foot pedal.

4. Sambungkeun Pedal Suku (Opsional): If using the foot pedal for speed control, connect its cable to the "FOOT PEDAL" port on the back of the main control unit.
5. Sambungan Daya: Plug the power cord into the power inlet on the back of the main control unit, then plug the other end into a suitable electrical outlet (220V).
6. Stand Handpiece: Place the handpiece in its designated stand when not in use.

Parentah Operasi

Kontrol Panel Langkungview

Gambar 4: Detil view of the control panel, showing the digital display, speed control dial, and function buttons.

• Saklar kakuatan: Located on the front right side of the unit. Flip to ON (green light) to power on the device.
• Digital tampilan: Shows the current rotation speed (RPM).
• Pencét Kontrol Kecepatan: Rotate clockwise to increase speed, counter-clockwise to decrease.
• Tombol FWD/REV: Toggles the rotation direction of the handpiece (Forward/Reverse).
• Tombol LEUNGEUN/SUKU: Switches between hand control (speed adjusted by dial) and foot pedal control.
• AUTO CRUISE Button: Activates the Auto-Cruise function, maintaining a set speed without continuous pedal pressure.

Operasi Dasar

1. Daya Hurung: Turn on the main power switch. The digital display will light up.
2. Selapkeun Bit: Ensure the handpiece is locked before inserting or removing a bit. Insert the desired nail bit firmly into the chuck of the handpiece. Twist to secure if applicable.
3. Select Control Mode:
   • Hand Mode: Press the HAND/FOOT button until "HAND" is indicated (or corresponding icon). Adjust speed using the Speed Control Dial.
   • Foot Mode: Press the HAND/FOOT button until "FOOT" is indicated (or corresponding icon). Speed will be controlled by the foot pedal.
4. Saluyukeun Speed:
   • In Hand Mode, rotate the Speed Control Dial to achieve the desired RPM (up to 50,000 RPM).
   • In Foot Mode, press the foot pedal to increase speed. The Auto-Cruise function can be used to maintain a set speed.
5. Ngarobih Pitunjuk Rotasi: Press the FWD/REV button to switch between forward and reverse rotation as needed for different applications.
6. Mimitian Gawé: Carefully apply the rotating bit to the nail surface.
7. Pareum listrik: After use, turn the Speed Control Dial to minimum, then flip the main power switch to OFF. Disconnect from power outlet if storing for extended periods.

Figure 5: The handpiece resting on its dedicated stand, ready for use or storage.

Pangropéa

Regular maintenance ensures the longevity and optimal performance of your Saeyang Marathon Handy 700.

beberesih

• Unit kontrol: Wipe the exterior of the control unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Handpiece: After each use, clean the handpiece exterior. Periodically, clean the chuck area to remove dust and debris. Refer to the handpiece-specific manual for detailed cleaning instructions if available.
• Bit: Clean and sterilize nail bits according to standard hygiene practices after each client.

Panyimpenan

• Simpen alat dina tempat anu tiis, garing, jauh tina sinar panonpoé langsung sareng Uap.
• Always place the handpiece in its stand when not in use to prevent damage.

Palayanan

The Saeyang Marathon Handy 700 is designed for easy repair and maintenance. For any issues beyond basic cleaning, it is recommended to contact authorized service centers or the manufacturer for professional assistance. Do not attempt to open the main control unit or handpiece for internal repairs, as this may void your warranty and cause further damage.

Pamérésan masalah

Lamun masalah persists sanggeus nyobian solusi ieu, mangga ngahubungan rojongan customer.

Spésifikasi teknis

Garansi & Rojongan

Émbaran jaminan

The Saeyang Marathon Handy 700 comes with a hassle-free warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. This warranty typically covers manufacturing defects and ensures easy repair or maintenance of your device.

Rojongan Palanggan

For technical assistance, troubleshooting, or service inquiries, please contact your point of purchase or the official Saeyang customer support. Ensure you have your product model number (Marathon Handy 700 2in1) and purchase details ready when contacting support.

Gambar 6: Hiji example of the Saeyang handpiece, which may include an authenticity hologram. Always ensure your product is genuine for warranty validity and optimal performance.